Explore the Influence of CFRP Surface Woven Fabric on Nonlinear Acoustic Detection
Source abstract
Abstract
While woven fabric is integral to carbon fiber reinforced polymer (CFRP) plates manufacturing, there has been a notable absence of research focused on the nonlinear detection of CFRP woven fabric. This article employs nonlinear acoustic methods to assess the response of CFRP plates, including unwoven, twill weave, and plain weave structures, to surface microcrack damage. A set of air-coupled nonlinear ultrasonic automatic detection systems was designed to acquire the amplitudes of the fundamental frequency and the second harmonic in the received signal, enabling the calculation of relative nonlinear parameters. Furthermore, the nonlinear cumulative effect was verified by varying the propagation distance. The experimental results highlight the significant influence of woven fabric on the outcomes of nonlinear acoustic testing. Specifically, the nonlinear response of unwoven CFRP to microcracks is the most pronounced, followed by twill weave CFRP plates. Notably, plain weave CFRP can significantly hinder the effectiveness of nonlinear acoustic detection. In cases where CFRP plates are loaded with such woven fabric, there is a potential for lower relative nonlinear parameters when damaged compared to their healthy state.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Hegde, S., Satish Shenoy, B., and Chethan, K.N., Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance, Mater. Today: Proc., 2019, vol. 19, pp. 658–662. https://doi.org/10.1016/j.matpr.2019.07.74910.1016/j.matpr.2019.07.749 ↗
2. Pramanik, A., Basak, A.K., Dong, Y., Sarker, P.K., Uddin, M.S., Littlefair, G., Dixit, A.R., and Chattopadhyaya, S., Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys—A review, Compos. Part A Appl. Sci. Manuf., 2017, vol. 101, pp. 1–29. https://doi.org/10.1016/j.compositesa.2017.06.00710.1016/j.compositesa.2017.06.007 ↗
3. Engineering Design Applications III: Structures, Materials and Processes, Öchsner, A. and Altenbach, H., Eds., Cham: Springer Int., 2020. https://doi.org/10.1007/978-3-030-39062-410.1007/978-3-030-39062-4 ↗
4. Kupski, J. and Teixeira De Freitas, S., Design of adhesively bonded lap joints with laminated CFRP adherends: Review, challenges and new opportunities for aerospace structures, Compos. Struct., 2021, vol. 268, p. 113923. https://doi.org/10.1016/j.compstruct.2021.11392310.1016/j.compstruct.2021.113923 ↗
5. Al-Lami, A., Hilmer, P., and Sinapius, M., Eco-efficiency assessment of manufacturing carbon fiber reinforced polymers (CFRP) in aerospace industry, Aerosp. Sci. Technol., 2018, vol. 79, pp. 669–678. https://doi.org/10.1016/j.ast.2018.06.02010.1016/j.ast.2018.06.020 ↗
6. Ahmad, H., Markina, A.A., Porotnikov, M.V., and Ahmad, F., A review of carbon fiber materials in automotive industry, IOP Conf. Ser. Mater. Sci. Eng., 2020, vol. 971, p. 032011. https://doi.org/10.1088/1757-899X/971/3/03201110.1088/1757-899X/971/3/032011 ↗
7. Othman, R., Ismail, N.I., Basri, H.M., Sharudin, H., and Hemdi, A.R., Application of carbon fiber reinforced plastics in automotive industry: A review, J. Mech. Manuf., 2018, vol. 1.
8. Zhang, L.W., Sojobi, A.O., and Liew, K.M., Sustainable CFRP-reinforced recycled concrete for cleaner eco-friendly construction, J. Cleaner Prod., 2019, vol. 233, pp. 56–75. https://doi.org/10.1016/j.jclepro.2019.06.02510.1016/j.jclepro.2019.06.025 ↗
9. Kromoser, B., Preinstorfer, P., and Kollegger, J., Building lightweight structures with carbon-fiber-reinforced polymer-reinforced ultra-high-performance concrete: Research approach, construction materials, and conceptual design of three building components, Struct. Concr., 2019, vol. 20, pp. 730–744. https://doi.org/10.1002/suco.20170022510.1002/suco.201700225 ↗
10. Luo, K., Liu, Y., Liang, W., Chen, L., and Yang, Z., Rapid damage reconstruction imaging of composite plates using non-contact air-coupled Lamb waves, NDT & E Int., 2024, vol. 143, p. 103047. https://doi.org/10.1016/j.ndteint.2024.10304710.1016/j.ndteint.2024.103047 ↗
11. Zhuang, L., Luo, K., and Yang, Z., A multimodal gated recurrent unit neural network model for damage assessment in CFRP composites based on Lamb waves and minimal sensing, IEEE Trans. Instrum. Meas., 2024, vol. 73, pp. 1–11. https://doi.org/10.1109/TIM.2023.334888410.1109/TIM.2023.3348884 ↗
12. Luo, K., Chen, L., Liang, W., and Weng, H., A dual-scale morphological filtering method for composite damage identification using FBP, Mech. Syst. Signal Process., 2023, vol. 184, p. 109683. https://doi.org/10.1016/j.ymssp.2022.10968310.1016/j.ymssp.2022.109683 ↗
13. Luo, K., Chen, L., Weng, H., Li, J., and Liang, W., Adaptive time-reversal method for delamination detection of composite plates based on reconstruction algorithm for probabilistic inspection of defects, Mech. Syst. Signal Process., 2023, vol. 196, p. 110336. https://doi.org/10.1016/j.ymssp.2023.11033610.1016/j.ymssp.2023.110336 ↗
14. Stepanova, L.N., Chernova, V.V., and Ramazanov, I.S., Acoustic emission testing of early generation of defects in CFRP samples under static and thermal loading, Russ. J. Nondestr. Test., 2020, vol. 56, pp. 784–794. https://doi.org/10.1134/S106183092010007110.1134/S1061830920100071 ↗
15. Luo, K., Chen, L., and Liang, W., Numerical simulation of carbon fiber reinforced polymer composite delamination damage identification using Lamb wave and filtered back-projection method, Russ. J. Nondestr. Test., 2022, vol. 58, pp. 917–925. https://doi.org/10.1134/S106183092270002410.1134/S1061830922700024 ↗
16. Sokolovskaya, Yu.G., Podymova, N.B., and Karabutov, A.A., Detecting violations in stacking of fiber layers in CFRPs using broadband acoustic spectroscopy, Russ. J. Nondestr. Test., 2022, vol. 58, pp. 882–890. https://doi.org/10.1134/S106183092260082410.1134/S1061830922600824 ↗
17. Zhang, C., Zhang, Y., Liu, D., Zhang, X., Wu, X., Qian, Z., and Li, X., A novel two-level approach to defect detection in braided CFRP using air-coupled ultrasonic testing, Ultrasonics, 2023, vol. 128, p. 106884. https://doi.org/10.1016/j.ultras.2022.10688410.1016/j.ultras.2022.106884 ↗
18. Li, J., Lu, Y., and Ma, H., Debonding growth evaluation in CFRP-reinforced steel structures based on correlation analysis using guided waves, Ultrasonics, 2023, vol. 135, p. 107139. https://doi.org/10.1016/j.ultras.2023.10713910.1016/j.ultras.2023.107139 ↗
19. Yang, H., Yang, Z., Lu, S., Shan, Y., Ma, J., Yang, L., and Wu, Z., Ultrasonic imaging of delamination in thick CFRP laminates using an energy-compensation reverse time migration method, Ultrasonics, 2024, vol. 138, p. 107253. https://doi.org/10.1016/j.ultras.2024.10725310.1016/j.ultras.2024.107253 ↗
20. Solodov, I.Y. and Maev, R.G., Overview of opportunities for nonlinear acoustic applications in material characterization and NDE, in Emerging Technologies in NDT, Boca Raton: CRC Press, 2022, pp. 137–144.
21. Boccaccio, M., Malfense Fierro, G.P.M., and Meo, M. Development of nonlinear acoustic and air-coupled techniques for non-destructive testing, in Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XIII, Gyekenyesi, A.L., Ed., Denver: SPIE, 2019, p. 42. https://doi.org/10.1117/12.251580410.1117/12.2515804 ↗
22. Donskoy, D. and Liu, D., Vibro-acoustic modulation baseline-free non-destructive testing, J. Sound Vib., 2021, vol. 492, p. 115808. https://doi.org/10.1016/j.jsv.2020.11580810.1016/j.jsv.2020.115808 ↗
23. Qin, F., Wu, Y., Guo, H., Zheng, B., and Liu, H., Laser ultrasonic nondestructive testing based on nonlinear ultrasonic coefficient, Russ. J. Nondestr. Test., 2020, vol. 56, pp. 209–221. https://doi.org/10.1134/S106183092003004310.1134/S1061830920030043 ↗
24. Zhao, G., Liu, S., Zhang, C., Jin, L., Qi, L., and Yang, Q., Comparison of damage distribution and ultrasonic nonlinear responses of two typical plate structures, Russ. J. Nondestr. Test., 2022, vol. 58, pp. 36–45. https://doi.org/10.1134/S106183092201007710.1134/S1061830922010077 ↗
25. Amura, M., Meo, M., and Amerini, F., Baseline-free estimation of residual fatigue life using a third order acoustic nonlinear parameter, J. Acoust. Soc. Am., 2011, vol. 130, pp. 1829–1837. https://doi.org/10.1121/1.362171410.1121/1.3621714 ↗
26. Sampath, S. and Sohn, H., Cubic nonlinearity parameter measurement and material degradation detection using nonlinear ultrasonic three-wave mixing, Ultrasonics, 2022, vol. 121, p. 106670. https://doi.org/10.1016/j.ultras.2021.10667010.1016/j.ultras.2021.106670 ↗
27. Yan, B., Song, Y., Nie, S., Yang, M., and Liu, Z., Measurement of the acoustic non-linearity parameter of materials by exciting reversed-phase rayleigh waves in opposite directions, Sens., 2020, vol. 20, p. 1955. https://doi.org/10.3390/s2007195510.3390/s20071955 ↗
28. Dyrwal, A., Meo, M., and Ciampa, F., Nonlinear air-coupled thermosonics for fatigue micro-damage detection and localisation, Ndt and E Int., 2018, vol. 97, pp. 59–67. https://doi.org/10.1016/j.ndteint.2018.03.01210.1016/j.ndteint.2018.03.012 ↗
29. Jahan, I., Effect of fabric structure on the mechanical properties of woven fabrics, Adv. Res. Textile Eng., 2017, vol. 2. https://doi.org/10.26420/advrestexteng.2017.101810.26420/advrestexteng.2017.1018 ↗
30. Cousigné, O., Moncayo, D., Coutellier, D., Camanho, P., and Naceur, H., Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations, Compos. Struct., 2014, vol. 115, pp. 75–88. https://doi.org/10.1016/j.compstruct.2014.04.01710.1016/j.compstruct.2014.04.017 ↗
31. Hinton, M. and Kaddour, A., Triaxial test results for fibre-reinforced composites: The second world-wide failure exercise benchmark data, J. Compos. Mater., 2013, vol. 47, pp. 653–678. https://doi.org/10.1177/002199831245978210.1177/0021998312459782 ↗
32. Thiele, S., Kim, J.-Y., Qu, J., and Jacobs, L.J., Air-coupled detection of nonlinear Rayleigh surface waves to assess material nonlinearity, Ultrasonics, 2014, vol. 54, pp. 1470–1475. https://doi.org/10.1016/j.ultras.2014.04.02010.1016/j.ultras.2014.04.020 ↗
33. Herrmann, J., Kim, J.-Y., Jacobs, L.J., Qu, J., Littles, J.W., and Savage, M.F., Assessment of material damage in a nickel-base superalloy using nonlinear Rayleigh surface waves, J. Appl. Phys., 2006, vol. 99, p. 124913. https://doi.org/10.1063/1.220480710.1063/1.2204807 ↗
34. Measurement of Nonlinear Ultrasonic Characteristics, Jhang, K.-Y., Lissenden, C.J., Solodov, I., Ohara, Y., and Gusev, V., Eds., Singapore: Springer Singapore, 2020. https://doi.org/10.1007/978-981-15-1461-610.1007/978-981-15-1461-6 ↗
35. Shan, S., Zhang, Y., Cheng, L., Song, Y., Pan, Y., and Cheng, L., “Cumulative effect” of second harmonic Lamb waves in a lossy plate, Ultrasonics, 2024, vol. 138, p. 107229. https://doi.org/10.1016/j.ultras.2023.10722910.1016/j.ultras.2023.107229 ↗