Properties of hybrid fiber reinforced concrete under repeated impact loads
Source abstract
Abstract
Steel, glass and polypropylene fiber reinforced concrete structures were investigated under repeated impact loads in this study. Twelve different concrete series prepared fiberless the one of all and the others reinforced polypropylene, glass, steel and hybrid fiber were produced. The polypropylene fibers in diameter of 50 mm, l/d (length/diameter) ratio of 400, glass fibers in diameter of 14 mm, l/d ratio of 857 and steel fibers in diameter of 0.75 mm, l/d ratio of 80 were used in concrete mixtures. The volumetric contents were 0.5, 0.75 and 1% in fiber reinforced concrete. The volumetric content was 0.1% in polypropylene and glass fiber reinforced concrete. Drop-weight test similar the method presented ACI 544.2R-89 was conducted using 28 days cured samples having dimensions of 100 × 100 × 100 mm and reduction of strength were determined by ultrasonic pulse velocity (UPV) test. Furthermore, initial crack formation and fracture numbers variation in samples were detected. In the present study, it was aimed to develop performance under repeated impact loads using fibers in concrete. As a result, especially impact performance was rather increased in steel fiber reinforced concrete, and hybrid fibers had also positive effect on the performance of concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Do, M.T., Chaallal, O., and Aitcin, P.C., Fatigue Behaviour of High-Performance Concrete, J. Mater. Civil Eng., 1993, vol. 5, no. 1, pp. 96–11.10.1061/(ASCE)0899-1561(1993)5:1(96) ↗
2. Gao, L. and Hsu, C.T.T., Fatigue of Concrete under Uniaxial Compression Cyclic Loading, ACI Mater. J., 1998, vol. 95, no. 5, pp. 575–581.
3. Hordijk, D.A., Wolsink, G.M., and Vries, J., Fracture and Fatigue Behaviour of High Strength Limestone Concrete as Compared to Gravel Concrete, HERON, 1995, vol. 40, no. 2, pp. 125–146.
4. Hsu, T.C., Fatigue of Plain Concrete, ACI J., 1981, vol. 78, no. 4, pp. 292–305.
5. Otter, D.E. and Naaman, A.E., Properties of Fibre Reinforced Concrete under Cyclic Loading, ACI Mater. J., 1988, vol. 85, no. 4, pp. 254–261.
6. Ramakrishnan, V., Mayer, C., and Naaman, A.E., Cyclic Behaviour, Fatigue Strength, Endurance Limit and Models for Fatigue Behaviour of FRC, Chapter 4: High Performance Fibre Reinforced Cement Composites 2, New York: E & FN Spoon, 1996, pp. 101–148.
7. Topcu, I.B. and Avcular, N., Collision Behaviours of Rubberized Concrete, Cement Concrete Res., 1997, vol. 27, no. 12, pp. 1893–1898.10.1016/S0008-8846(97)00204-4 ↗
8. Cachim, P.B., Figueiras, J.A., and Pereira, P.A.A., Fatigue Behaviour of Fibre-Reinforced Concrete in Compression, Cement Concrete Composites, 2002, vol. 24, no. 2, pp. 211–217.10.1016/S0958-9465(01)00019-1 ↗
9. Singh, S.P. and Kaushik, S.K., Fatigue Strength of Steel Fibre Reinforced Concrete in Flexure, Cement Concrete Composites, 2003, vol. 25, no. 7, pp. 779–786.10.1016/S0958-9465(02)00102-6 ↗
10. Ramakrishnan, V., Balagure, P., Kostaneski, L., and Johnston, D., Field Performance of Fiber Reinforced Concrete Highway Pavements, in Serviceability and Durability of Construction Materials, Proceedings of the Fist Materials Engineering Congress, New York: ASCE Publications, 1990, vol. 2, pp. 903–912.
11. Ezeldin, A.S. and Shiah, T.W., Analytical Immediate and Long-Term Deflection of Fibre-Reinforced Concrete Beams, J. Structural Eng., 1995, vol. 121, no. 4, pp. 727–737.10.1061/(ASCE)0733-9445(1995)121:4(727) ↗
12. Lee, M.K. and Barr, B.I.G., An Overview of the Fatigue Behaviour of Plain and Fibre Reinforced Concrete, Cement Concrete Composites, 2004, vol. 26, no. 4, pp. 299–305.10.1016/S0958-9465(02)00139-7 ↗
13. Arslan, A. and Aydin, A.C., General Properties of Fiber Reinforced Concrete, J. Ready Mix Concrete, 1999, vol. 36, pp. 67–75.
14. Marar, K., Eren, O., and Celik, T., Relationship between Impact Energy and Compression Toughness Energy of High-Strength Fibre-Reinforced Concrete, Mate. Lett., 2001, vol. 47, pp. 297–304.10.1016/S0167-577X(00)00253-6 ↗
15. Wienke, B., Erlauterungen zum Merkblatt Grundlagen zur Bemessung von Industriefuboden aus Stahlfaserbeton, Faserbeton, Vortage der DBV (Deutscher Beton-Verein E.V.), Arbeitstagung, 1, Dezember, Duisburg, 1992, pp. 29–34.
16. Yan, H., Sun, W., and Chen, H., Effect of Silica Fume and Steel Fibre on the Dynamic Mechanical Performance of High-Strength Concrete, Cement Concrete Res., 1999, vol. 29, no. 3, pp. 423–426.10.1016/S0008-8846(98)00235-X ↗
17. Li, V.C. and Matsumoto, T., Fatigue Crack Growth Analysis of Fibre Reinforced Concrete with Effect of Interfacial Bond Degradation, Cement Concrete Composites, 1998, vol. 20, no. 5, pp. 353–363.10.1016/S0958-9465(98)00010-9 ↗
18. Matsumoto, T. and Li, V.C., Fatigue Analysis of Fibre Reinforced Concrete with a Fracture Mechanics Based Model, Cement Concrete Composites, 1999, vol. 21, no. 4, pp. 249–261.10.1016/S0958-9465(99)00004-9 ↗
19. Zhang, J., Stang, H., and Li, V.C., Fatigue Life Prediction of Fibre Reinforced Concrete under Flexural Load, Int. J. Fatigue, 1999, vol. 21, no. 10, pp. 1033–1049.10.1016/S0142-1123(99)00093-6 ↗
20. Naaman, A.E. and Hammoud, H., Fatique Characteristics of High Performance Fibre-Reinforced Concrete, Cement Concrete Composites, 1998, vol. 20, no. 5, pp. 353–363.10.1016/S0958-9465(98)00004-3 ↗
21. Cachim, P.B., Figueiras, J.A., and Pereira, P.A.A., Fatigue Behaviour of Fibre-Reinforced Concrete in Compression, Cement Concrete Composites, 2002, vol. 24, no. 2, pp. 211–217.10.1016/S0958-9465(01)00019-1 ↗
22. Arslan, A. and Aydin, A.C., General Properties of Fiber Reinforced Concrete under Impact Effect, Symposium of Steel Fiber Reinforced Concretes, Turkey, Istanbul, 1999, pp. 1–30.
23. Turker, T., The Real Preventation Against to Internal Stresses Occurring in Reinforced Concrete, Construction Mater. Magazine, 2000, vol. 150, pp. 24–25.
24. Qian, C.X. and Stroeven, P., Development of Hybrid Polypropylene-Steel Fibre Reinforced Concrete, Cement Concrete Res., 2000, vol. 30, no. 1, p. 63–69.10.1016/S0008-8846(99)00202-1 ↗
25. Ekinci, C.E. and Yeginobal-, A., Impact Resistance of Silica Fume Added Concrete, National Concrete Congress-Mineral and Chemical Additives on Concrete Technology, Istanbul, 1996, pp. 279–289.
26. ACI Committee 544.2R, Measurement of Properties of Fiber Reinforced Concrete, Detroit: American Concrete Institute, 1989.
27. Yazicioglu, S., Gönen, T., and Cobanoglu, Ö.C., Strength and Impact Energy of Concrete, Sci. Eng. J. Firat Univ., 2005, vol. 17, no. 4, pp. 681–685.
28. Yildirim, S.T., The Investigation of Performance Characteristics of Fiber Reinforced Concretes, PhD Thesis, Turkey, Elazig, Firat University Natural Science Institute, 2002, p. 193.