journal article·2025-12-04

Experimental analysis of thermal and reflective behaviour of urban pavement materials for mitigating the urban heat island effect

W. Mera-Intriago, F. Moreno-Navarro, Antonio Peña-García, M. C. Rubio-Gámez

Publisher page

Abstract

Urban pavements cover more than 30% of city surfaces and affect UHI by absorbing and redirecting solar energy. This study presents a laboratory protocol that measures both the intensity and direction of visible reflectance while tracking surface-temperature rise on identical specimens. Nine common materials (six asphalt mixtures, Portland-cement concrete, two hydraulic tiles) were characterised for colour, density and air voids and tested under controlled IR heating–cooling. Multiple regression showed luminance dominates peak dry temperature (R2 = 0.91), whereas volumetric design did not: air-voids and density were non-significant in dry conditions, and only density under saturation showed a modest effect (∼p ≈ 0.05). Directional data also showed that the brightest pavements still reflect strongly at 10°, exceeding the maximum 80° reflection of any asphalt, implying potential radiant-load penalties for façades and pedestrians. Cool-pavement design should therefore prioritise reflectivity and its directionality; volumetric adjustments are a moisture-dependent, glare-free complement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Urban Heat Island Mitigation · Smart Materials for Construction · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Granada (LabIC.UGR)

Funding

European Union · Marie Skłodowska-Curie

References (38)

Show source-provided references
1. PG-3 Pliego de prescripciones técnicas generales para obras de carreteras y puentes relativos a materiales básicos a firmes y pavimentos y a señalización balizamiento y sistemas de contención de vehículos. (2015). Madrid Spain.
2. 10.1016/j.conbuildmat.2024.13836110.1016/j.conbuildmat.2024.138361 ↗
3. 10.1016/J.ENBUILD.2016.09.06710.1016/J.ENBUILD.2016.09.067 ↗
4. 10.1016/S0169-2046(02)00165-210.1016/S0169-2046(02)00165-2 ↗
5. 10.1016/j.conbuildmat.2021.12389210.1016/j.conbuildmat.2021.123892 ↗
6. 10.1080/14680629.2021.188459010.1080/14680629.2021.1884590 ↗
7. 10.1016/J.CONBUILDMAT.2018.07.24010.1016/J.CONBUILDMAT.2018.07.240 ↗
8. 10.1016/J.APPLTHERMALENG.2019.11375510.1016/J.APPLTHERMALENG.2019.113755 ↗
9. 10.1080/10298436.2021.195241010.1080/10298436.2021.1952410 ↗
10. 10.1080/10298436.2020.183410910.1080/10298436.2020.1834109 ↗
11. 10.25039/TR.231.201910.25039/TR.231.2019 ↗
12. 10.1016/B978-0-12-818981-8.00006-010.1016/B978-0-12-818981-8.00006-0 ↗
13. 10.1061/(ASCE)MT.1943-5533.000113210.1061/(ASCE)MT.1943-5533.0001132 ↗
14. 10.3390/buildings1205053710.3390/buildings12050537 ↗
15. 10.1061/(ASCE)MT.1943-5533.000306110.1061/(ASCE)MT.1943-5533.0003061 ↗
16. 10.3390/atmos807011510.3390/atmos8070115 ↗
17. 10.1080/14680629.2023.218100710.1080/14680629.2023.2181007 ↗
18. 10.1016/0004-6981(73)90140-610.1016/0004-6981(73)90140-6 ↗
19. 10.1080/00046973.1976.964842210.1080/00046973.1976.9648422 ↗
20. 10.1080/14680629.2019.159323010.1080/14680629.2019.1593230 ↗
21. 10.4028/www.scientific.net/KEM.663.14810.4028/www.scientific.net/KEM.663.148 ↗
22. 10.1016/J.RSER.2015.07.17710.1016/J.RSER.2015.07.177 ↗
23. 10.1016/S1001-0742(08)60019-410.1016/S1001-0742(08)60019-4 ↗
24. 10.1016/j.apenergy.2015.01.12910.1016/j.apenergy.2015.01.129 ↗
25. 10.1016/J.ENBUILD.2014.09.05210.1016/J.ENBUILD.2014.09.052 ↗
26. 10.1016/j.conbuildmat.2022.12935010.1016/j.conbuildmat.2022.129350 ↗
27. 10.1080/14680629.2024.243834010.1080/14680629.2024.2438340 ↗
28. 10.1061/(ASCE)MT.1943-5533.000087210.1061/(ASCE)MT.1943-5533.0000872 ↗
29. 10.1177/0361198124128462410.1177/03611981241284624 ↗
30. 10.1016/j.aej.2022.11.00510.1016/j.aej.2022.11.005 ↗
31. 10.1007/978-3-031-67252-1_3510.1007/978-3-031-67252-1_35 ↗
32. UNE (Asociación Española de Normalización). (2011). EN 197-1:2011 Cement – Part 1: Composition specifications and conformity criteria for common cements. [place unknown].
33. UNE (Asociación Española de Normalización). (2012). EN 12697-6; Bituminous mixtures. Test Methods for Hot Mix Asphalt – Part 6: Determination of bulk density of bituminous specimens. Madrid Spain.
34. UNE (Asociación Española de Normalización). (2020). UNE-EN 12697-8:2020 Bituminous mixtures – Test methods – Part 8: Determination of void characteristics of bituminous specimens. [place unknown].
35. United Nations D of E and SAPD. (2019). World urbanization prospects: The 2018 revision (ST/ESA/SER.A/420). United Nations.
36. 10.13140/RG.2.2.35610.0864310.13140/RG.2.2.35610.08643 ↗
37. 10.1016/B978-0-443-18786-5.00002-010.1016/B978-0-443-18786-5.00002-0 ↗
38. 10.1016/J.JRENG.2024.04.00810.1016/J.JRENG.2024.04.008 ↗