Hot-mix asphalt pavement frictional resistance as a function of aggregate physical properties

Aggregates were tested for acid insolubility, differential wear (DW), and frictional resistance and along with physical data were correlated to aggregate frictional resistance. Physical data included bulk specific gravity, per cent absorption, per cent loss from impact, and per cent loss from brine freeze/thaw. It was observed that the aggregates used had a negligible amount of insoluble material and therefore had an insignificant effect on the frictional resistance. Terminal frictional resistance increased with decreasing bulk specific gravity, and increased with increasing per cent absorption and per cent loss from impact. Correlation between terminal frictional resistance and brine loss was moderate. DW measurements were taken on stone–slag aggregate blends to determine the effectiveness of blends used in pavement mixtures. DW results indicated that the high-friction component of each blend could be improved by blending with softer carbonate aggregates, which also may be more cost effective.