Effect of superficially modified zinc oxide nanoparticles as an additive on the rheological performance of asphalt binder
Source abstract
Abstract
The surface effect that hinders the dispersion of nanomaterials in the asphalt binder due to the large surface area and small particle size should be investigated. Thus, this study evaluates the effect of the incorporation of superficially modified zinc oxide nanoparticles (ZnO M) by 3-(2.3-epoxypropoxy)propyl trimethoxysilane (GPTMS) in the asphalt binder with 50/70 penetration index. The additive was incorporated in contents of 3%, 5%, and 7% in weight of the bind through physical and rheological tests. Penetration tests, softening point, rotational viscosity, performance grade (PG) – before and after rolling thin film oven (RTFO), multiple stress creep and recovery (MSCR), linear amplitude sweep (LAS), and master curve were performed. The addition of ZnO M nanoparticles provided the asphalt binder with more resistance to aging and oxidation in almost all properties analysed. In addition, the ZnO M increased resistance to permanent deformation, temperature field, and the integrity of the asphalt binder, thus increasing its fatigue life.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Federal University of Campina Grande, Campina Grande, Brazil
Funding
Conselho Nacional de Desenvolvimento Científico e Tecnológico
References (69)
Show source-provided references
1. 10.1016/j.conbuildmat.2016.11.05210.1016/j.conbuildmat.2016.11.052 ↗
2. 10.1080/14680629.2019.158749610.1080/14680629.2019.1587496 ↗
3. 10.1080/14680629.2016.120862110.1080/14680629.2016.1208621 ↗
4. American Association of State Highway and Transportation Officials. (2018). AASHTO TP 101-12: Standard method of test for estimating fatigue resistance of asphalt binders using the linear amplitude sweep. AASHTO.
5. American Association of State Highway and Transportation Officials. (2021). AASHTO M 320: Standard specification for performance-graded asphalt binder. Test standard specifications for transportation materials and methods of sampling and testing. AASHTO.
6. American Society for Testing and Materials. (2015). ASTM D4402: Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM.
7. American Society for Testing and Materials. (2019). ASTM D2872: Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). ASTM.
8. American Society for Testing and Materials. (2020). ASTM D36M: Standard test method for softening point of bitumen (ring-and-ball apparatus). ASTM.
9. American Society for Testing and Materials. (2020). ASTM D5M: Standard test method for penetration of bituminous materials. ASTM.
10. American Society for Testing and Materials. (2020). ASTM D7405: Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer. ASTM.
11. American Society for Testing and Materials. (2021). ASTM D6373: Standard specification for performance-graded asphalt binder. ASTM.
12. American Society for Testing and Materials. (2021). ASTM E1252: Standard practice for general techniques for obtaining infrared spectra for qualitative analysis. ASTM.
13. 10.1007/s42947-020-0327-210.1007/s42947-020-0327-2 ↗
14. 10.1061/JMCEE7.MTENG-1494410.1061/JMCEE7.MTENG-14944 ↗
15. 10.1590/S1517-707620210003.1302010.1590/S1517-707620210003.13020 ↗
16. 10.1016/j.conbuildmat.2015.10.15310.1016/j.conbuildmat.2015.10.153 ↗
17. 10.1016/j.conbuildmat.2021.12520110.1016/j.conbuildmat.2021.125201 ↗
18. D’angelo, J., Kluttz, R., Dongre, R., Stephens, K., & Zanzotto, L. (2007). Revision of the superpave high temperature binder specification: The multiple stress creep recovery test. Journal of the Association of Asphalt Paving Technologists, 76, 123–162.
19. 10.1016/j.conbuildmat.2016.03.15110.1016/j.conbuildmat.2016.03.151 ↗
20. 10.1016/j.ijprt.2016.11.00910.1016/j.ijprt.2016.11.009 ↗
21. 10.1016/j.proeng.2016.06.11910.1016/j.proeng.2016.06.119 ↗
22. 10.1061/(ASCE)MT.1943-5533.000142310.1061/(ASCE)MT.1943-5533.0001423 ↗
23. Gama, D. A. (2016). Effect of adding reactive, non-reactive polymers and polyphosphoric acid and their combinations on the properties of asphalt binders. Federal University of Campina Grande.
24. 10.1016/j.conbuildmat.2018.06.09910.1016/j.conbuildmat.2018.06.099 ↗
25. 10.1016/S0925-8388(03)00371-210.1016/S0925-8388(03)00371-2 ↗
26. 10.4322/2176-1523.086610.4322/2176-1523.0866 ↗
27. 10.1617/s11527-015-0566-x10.1617/s11527-015-0566-x ↗
28. Hintz, C., & Bahia, H. (2013). Simplification of linear amplitude sweep test and specification parameter. Transportation Research, 2370, 10–16.
29. 10.1016/j.conbuildmat.2016.03.11810.1016/j.conbuildmat.2016.03.118 ↗
30. 10.1016/j.conbuildmat.2014.08.07210.1016/j.conbuildmat.2014.08.072 ↗
31. 10.1016/j.conbuildmat.2019.03.25710.1016/j.conbuildmat.2019.03.257 ↗
32. 10.1007/s41062-017-0051-110.1007/s41062-017-0051-1 ↗
33. 10.1016/j.conbuildmat.2015.08.14110.1016/j.conbuildmat.2015.08.141 ↗
34. 10.1080/10916466.2014.94811910.1080/10916466.2014.948119 ↗
35. Marinho Filho, P. G. T. (2017). Rheological evaluation of asphalt binders modified with titanium dioxide nanoparticles. Federal University of Campina Grande.
36. 10.1007/s40999-020-00525-410.1007/s40999-020-00525-4 ↗
37. Melo Neto, O. M., Mendonça, A. M. G. D., Rodrigues, J. K. G., Lima, R. K. B., Silvani, C., & Silva, I. M. (2022). Rheological study of asphalt binder modified by cotton and copaiba oils. Revista Cubana de Ingeniería, 13(1).
38. 10.1016/j.conbuildmat.2022.12872810.1016/j.conbuildmat.2022.128728 ↗
39. 10.1007/s12649-022-01951-210.1007/s12649-022-01951-2 ↗
40. Mendonça, A. M. G. D., Melo Neto, O. M., Rodrigues, J. K. G., Dantas, I. S., Silva, I. M., Costa, D. B., & Lima, R. K. B. (2022a). Physical-rheological analysis of asphalt binders modified with refined cottonseed oil for use in warm asphalt mixtures. Revista Cubana de Ingeniería, 13(2), 1–10.
41. 10.1080/14488353.2022.208937610.1080/14488353.2022.2089376 ↗
42. 10.1080/10916466.2021.200712410.1080/10916466.2021.2007124 ↗
43. 10.1590/1517-7076-RMAT-2022-019210.1590/1517-7076-RMAT-2022-0192 ↗
44. 10.1016/j.conbuildmat.2019.11715110.1016/j.conbuildmat.2019.117151 ↗
45. 10.1016/j.proeng.2016.06.13510.1016/j.proeng.2016.06.135 ↗
46. Nascimento, T. C. B. (2015). Effect of thermo-oxidative and photo-oxidative aging on rheological properties of modified asphalt binders. University of São Paulo.
47. 10.1016/j.conbuildmat.2018.03.10710.1016/j.conbuildmat.2018.03.107 ↗
48. Pamplona, T. F. (2013). Effect of polyphosphoric acid addition on asphalt binders from different sources. University of São Paulo.
49. Pavia, D. L., Lampman, G. M., Kriz, G. S., & Vyvyan, J. R. (2015). Introduction to spectroscopy. Cengage Learning.
50. Pechini M. P. (1967). Metedology of preparing lead and alkaline: Earth litanates and niobates and coating (Method using the same to for a capacitor Us Patent 3.330.697).
51. 10.1088/1757-899X/712/1/01203710.1088/1757-899X/712/1/012037 ↗
52. 10.1016/j.conbuildmat.2019.11782710.1016/j.conbuildmat.2019.117827 ↗
53. 10.1061/(ASCE)MT.1943-5533.000262110.1061/(ASCE)MT.1943-5533.0002621 ↗
54. Scherrer, P. (1918). Bestimmung der Grosse und der Inneren Struktur von Kolloidteilchen Mittels Rontgenstrahlen, Nachrichten von der Gesellschaft der Wissenschaften, Gottingen. Mathematisch-Physikalische Klasse, 2, 98–100.
55. 10.3390/app1001009110.3390/app10010091 ↗
56. 10.1590/1517-7076-RMAT-2022-013810.1590/1517-7076-RMAT-2022-0138 ↗
57. Sousa Neto, V. F. (2019). Rheological evaluation of asphalt binder modified with zinc oxide nanoparticles. University Federal of Campina Grande.
58. 10.1061/(ASCE)MT.1943-5533.000175010.1061/(ASCE)MT.1943-5533.0001750 ↗
59. 10.4028/www.scientific.net/AEF.24.5510.4028/www.scientific.net/AEF.24.55 ↗
60. 10.1016/j.conbuildmat.2019.01.16710.1016/j.conbuildmat.2019.01.167 ↗
61. 10.1061/(ASCE)MT.1943-5533.000018410.1061/(ASCE)MT.1943-5533.0000184 ↗
62. 10.1007/s40999-017-0256-x10.1007/s40999-017-0256-x ↗
63. 10.1016/j.conbuildmat.2014.09.01410.1016/j.conbuildmat.2014.09.014 ↗
64. 10.1016/j.conbuildmat.2018.08.13610.1016/j.conbuildmat.2018.08.136 ↗
65. 10.1061/(ASCE)MT.1943-5533.000132110.1061/(ASCE)MT.1943-5533.0001321 ↗
66. 10.1061/(ASCE)MT.1943-5533.000149910.1061/(ASCE)MT.1943-5533.0001499 ↗
67. 10.1016/j.conbuildmat.2015.08.13810.1016/j.conbuildmat.2015.08.138 ↗
68. 10.1016/j.conbuildmat.2017.04.06210.1016/j.conbuildmat.2017.04.062 ↗
69. 10.1080/14680629.2020.174869310.1080/14680629.2020.1748693 ↗