Asphalt mixtures degradation induced by water, frost, and road salt in the 4-PB bending test evaluated by stiffness variability
Source abstract
Abstract
Water, frost, and road salt are important environmental factors that affect the durability of the entire pavement structure e.g. during the winter season or in regions located above sea zones. A proprietary experimental method was used to investigate the influence of these factors on mineral asphalt mixtures. Four road mix types of asphalt concrete (AC22) were analysed in the experiment. They differed in production technology, type, and content of the binder used. Based on the experimental approach and test data, changes in the value of the initial stiffness modulus (4-PB-PR test) were analysed. Based on the obtained results, it was established that both interactions caused a significant decrease in the module's value, which reached over a dozen percent. The article also evidenced that lower binder content in mixtures increases the negative environmental impact on the material, whereas its type may accelerate or reduce material degradation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Wrocław University of Science and Technology
References (69)
Show source-provided references
1. 10.14311/CEJ.2019.01.000610.14311/CEJ.2019.01.0006 ↗
2. American Association of State Highway and Transportation. (2021). Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage (T 283). American Association of State Highway and Transportation Officials (AASHTO).
3. 10.1080/10298436.2012.67784410.1080/10298436.2012.677844 ↗
4. Błażejowski K. Ostrowski P. Wójcik-Wiśniewska M. & Baranowska W. (2020). Mixes and pavements with Orbiton HIMA asphalts (Polish). Płock: Orlen Asfalt Sp. z o.o. https://www.orlen-asfalt.pl/PL/InformacjeTechniczne/Strony/Nasze-Publikacje.aspx
5. Błażejowski K. Wójcik-Wiśniewska M. Baranowska W. & Ostrowski P. (2021). 2021 Poradnik Asfaltowy. Płock: Orlen Asfalt Sp. z o.o.
6. 10.1016/j.jclepro.2020.12212810.1016/j.jclepro.2020.122128 ↗
7. Cominsky, R. J. (1994). The superpave mix design manual for new construction and overlays (SHRP A-407). National Research Council. https://onlinepubs.trb.org/onlinepubs/shrp/SHRP-A-407.pdf
8. 10.1016/j.conbuildmat.2022.12779910.1016/j.conbuildmat.2022.127799 ↗
9. 10.1016/j.conbuildmat.2021.12574910.1016/j.conbuildmat.2021.125749 ↗
10. Generalna Dyrekcja Dróg Krajowych i Autostrad. (2014). Nawierzchnie asfaltowe na drogach krajowych: WT-2 2014 - część I Mieszanki mineralno-asfaltowe - wymagania techniczne. Generalna Dyrekcja Dróg Krajowych i Autostrad. https://www.gov.pl/attachment/34584de6-9577-4d36-876a-2e11c703128c
11. Generalna Dyrekcja Dróg Krajowych i Autostrad. (2017a September 5). Wytyczne zimowego utrzymania dróg - zarządzenie nr 31. Generalna Dyrekcja Dróg Krajowych i Autostrad. https://www.archiwum.gddkia.gov.pl/userfiles/articles/z/zarzadzenia-generalnego-dyrektor_24305/zarzadzenie%2031.pdf
12. Generalna Dyrekcja Dróg Krajowych i Autostrad. (2017b September 21). Standardy zimowego utrzymania dróg - zał. nr 1 do zarządzenia nr 32. https://www.archiwum.gddkia.gov.pl/userfiles/articles/z/zarzadzenia-generalnego-dyrektor_24305/zarzadzenie%2032%20zalacznik.pdf
13. Generalna Dyrekcja Dróg Krajowych i Autostrad. (2017c September 21). Standardy zimowego utrzymania dróg - zarządzenie nr 32. https://www.archiwum.gddkia.gov.pl/userfiles/articles/z/zarzadzenia-generalnego-dyrektor_24305/zarzadzenie%2032.pdf
14. 10.1016/S0269-7491(02)00481-510.1016/S0269-7491(02)00481-5 ↗
15. Government of Canada. (2001). Priority substances list assessment report - Road salts. Priority substances list assessment report. Environment Canada.
16. 10.17226/2317810.17226/23178 ↗
17. 10.1515/ace-2015-009610.1515/ace-2015-0096 ↗
18. Harrigan E. T. & Leahy R. B. (1994). The SUPERPAVE mix design system manual of specifications (SHRP A-379). Washington D.C.: National Research Council. https://onlinepubs.trb.org/onlinepubs/shrp/SHRP-A-379.pdf
19. 10.1061/(ASCE)0733-947X(2002)128:4(385)10.1061/(ASCE)0733-947X(2002)128:4(385) ↗
20. 10.1139/cjce-2016-001010.1139/cjce-2016-0010 ↗
21. 10.1617/s11527-007-9282-510.1617/s11527-007-9282-5 ↗
22. Industrial experimental department of road and bridge engineering Sp. z o.o. (2004). General technical specification D - 10.10.01c combating winter slippy on the road (Polish) Warsaw 2004. https://www.bip.powiattorunski.pl/plik 43153 ost-pdf.pdf
23. 10.1061/9780784478554.01010.1061/9780784478554.010 ↗
24. 10.1061/(ASCE)CF.1943-5509.000064510.1061/(ASCE)CF.1943-5509.0000645 ↗
25. 10.1016/j.jclepro.2021.12947810.1016/j.jclepro.2021.129478 ↗
26. Judycki J. (2014). Analizy i projektowanie konstrukcji nawierzchni podatnych i półsztywnych: Praca zbiorowa. WKiŁ.
27. Judycki J. Jaskula P. Alenowicz J. Dołżycki B. Jaczewski M. Ryś D. & Stienss M. (2014). Catalog of typical pavement constructions for flexible and semi-rigid pavement (Polish). Generalna Dyrekcja Dróg Krajowych i Autostrad. https://www.gddkia.gov.pl/frontend/web/userfiles/articles/d/dokumenty-techniczne_8162/Dokumenty%20techniczne/KTKNPiP.pdf
28. 10.1016/j.coldregions.2019.05.00210.1016/j.coldregions.2019.05.002 ↗
29. 10.3390/ma1309212610.3390/ma13092126 ↗
30. 10.1016/j.jclepro.2015.03.02810.1016/j.jclepro.2015.03.028 ↗
31. 10.1016/j.clet.2021.10018810.1016/j.clet.2021.100188 ↗
32. Kelly V. R. Findaly S. E. G. Schlesinger W. H. Menking K. & Chatrchyan A. M. (2010). Road salt - moving toward the solution. The Cary Institute of Ecosystem Studies. https://www.caryinstitute.org/sites/default/files/public/reprints/report_road_salt_2010.pdf
33. 10.1021/es071391l10.1021/es071391l ↗
34. 10.3846/13923730.2004.963628210.3846/13923730.2004.9636282 ↗
35. 10.1080/14680629.2017.128644210.1080/14680629.2017.1286442 ↗
36. Leszczyńska W. & Pszczoła M. (2021). Analiza temperatury ekwiwalentnej do projektowania nawierzchni asfaltowych w Polsce z wykorzystaniem metody AASHTO 2004. Przegląd Komunikacyjny R. 76 nr 4. https://yadda.icm.edu.pl/baztech/element/bwmeta1.element.baztech-29999f2d-9654-4a66-94c0-66090de8474b
37. 10.4028/www.scientific.net/AMR.953-954.160410.4028/www.scientific.net/AMR.953-954.1604 ↗
38. Lottman R. P. (1982). Predicting moisture-induced damage to asphaltic concrete. Field evaluation. NCHRP: Vol. 246.
39. Lottman R. P. White L. J. & Frith D. J. (1988). Methods of predicting and controlling moisture damage in asphalt concrete. https://www.researchgate.net/publication/312898075_Methods_of_predicting_and_controlling_moisture_damage_in_asphalt_concrete
40. Mackiewicz P. (2016). Trwałość zmęczeniowa mieszanek mineralno-asfaltowych stosowanych w nawierzchniach drogowych. Oficyna Wydawnicza Politechniki Wrocławskiej; Politechnika Wrocławska.
41. 10.3390/ma1516564610.3390/ma15165646 ↗
42. 10.3390/ma1406134510.3390/ma14061345 ↗
43. Mączka E. (2022). The durability of asphalt mixtures including fatigue and regeneration phenomenon (PRE/06/2022) [PhD]. Wroclaw University of Science and Technology Wroclaw University of Science and Technology.
44. 10.3390/app12231206810.3390/app122312068 ↗
45. 10.1016/j.coldregions.2012.09.00310.1016/j.coldregions.2012.09.003 ↗
46. 10.1016/j.conbuildmat.2017.02.13510.1016/j.conbuildmat.2017.02.135 ↗
47. Piłat, J., Radziszewski, P., & Król, J. (2015). Technologia materiałów i nawierzchni asfaltowych. Oficyna Wydawnicza Politechniki Warszawskiej. ISBN: 9788378144441.
48. Piotr Jaskuła. (2004). Deteriorating effects of water and frost on asphalt mixes – state of the art. Roads and Bridges - Drogi I Mosty, 3(4), 5–44. https://www.rabdim.pl/index.php/rb/article/view/v3n4p5/213
49. Polski Komitet Normalizacyjny. (2016a). Bituminous mixtures – Material specifications – Part 1: Asphalt Concrete: PN-EN 13108-1:2016-07 (PN-EN 13108-1:2016-07). Warsaw. PKN.
50. Polski Komitet Normalizacyjny. (2016b). Bituminous mixtures – Material specifications – Part 20: Type testing: PN-EN 13108-20:2016-07 (PN-EN 13108-20:2016-07). Warsaw. PKN.
51. Polski Komitet Normalizacyjny. (2018). Bituminous mixtures – Test methods – Part 26: Stiffness: PN-EN 12697-26:2018-08 (PN-EN 12697-26:2018-08). Warsaw. PKN.
52. Polski Komitet Normalizacyjny. (2020). Bituminous mixtures – Test methods – Part 6: Determination of bulk density of bituminous specimens: PN-EN 12697-6:2020-07 (PN-EN 12697-6:2020-07). Warsaw. PKN.
53. 10.13140/RG.2.2.17712.0000810.13140/RG.2.2.17712.00008 ↗
54. 10.1016/j.chemolab.2010.04.01410.1016/j.chemolab.2010.04.014 ↗
55. Said S. (1989). Tensile and fatigue properties of bituminous mixtures using the indirect tensile method. Undefined. https://www.semanticscholar.org/paper/TENSILE-AND-FATIGUE-PROPERTIES-OF-BITUMINOUS-USING-Said/85795cab9973612af49eaa4e661f81f9c9927ee2
56. saideep Pavuluri. (2014). Kinetic approach for modeling salt precipitation in porous-media. (2828112) [Independent Study]. Universitat Stuttgart Stuttgart. https://www.researchgate.net/publication/262495450_Kinetic_approach_for_modeling_salt_precipitation_in_porous-media
57. 10.1007/978-3-030-12450-2_2010.1007/978-3-030-12450-2_20 ↗
58. 10.1016/j.conbuildmat.2022.12808510.1016/j.conbuildmat.2022.128085 ↗
59. Sybilski D. & Bańkowski W. (2004). Temperatura równoważna nawierzchni asfaltowej ze względu na zmęczenie w polskich warunkach klimatycznych. Drogownictwo : nr 6 179–184. http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.baztech-article-BAT1-0005-0022
60. 10.1016/j.coldregions.2018.02.01110.1016/j.coldregions.2018.02.011 ↗
61. 10.1061/(ASCE)0733-947X(1987)113:1(15)10.1061/(ASCE)0733-947X(1987)113:1(15) ↗
62. 10.3390/ma911087810.3390/ma9110878 ↗
63. 10.1016/j.trpro.2020.08.08710.1016/j.trpro.2020.08.087 ↗
64. 10.3390/app1004124110.3390/app10041241 ↗
65. 10.1016/j.trpro.2021.11.04410.1016/j.trpro.2021.11.044 ↗
66. 10.1016/j.jclepro.2022.13061010.1016/j.jclepro.2022.130610 ↗
67. 10.1016/j.ijfatigue.2020.10592310.1016/j.ijfatigue.2020.105923 ↗
68. 10.1007/s11595-014-1033-110.1007/s11595-014-1033-1 ↗
69. 10.1007/s42947-019-0095-210.1007/s42947-019-0095-2 ↗