Mechanical performance of asphalt base layers with high RAP content and recycling agents
Source abstract
Abstract
With circularity in mind, adding reclaimed asphalt in new asphalt mixtures is a common practice. While aiming for higher recycling rates, the need for better control of the mixture performance increases. Recycling agents are often proposed to restore the properties of aged binders. This study investigates the mechanical performance of plant-produced hot mix asphalt for base layers with high reclaimed asphalt content and recycling agents. Two field test tracks, each containing a section with and without a recycling agent, were constructed to allow for long-term performance evaluation. Plant-produced asphalt mixture from all sections was sampled and compacted in the laboratory and subjected to various mechanical tests, including rutting, stiffness, fatigue, cracking and water sensitivity. Besides a lower indirect tensile strength, the overall results indicate a limited influence of the used recycling agents on the mechanical performance of the mixtures, particularly in terms of resistance to rutting and fatigue cracking.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
EMIB, Faculty of Applied Engineering, University of Antwerp, Antwerp, Belgium
Belgian Road Research Centre, Brussels, Belgium
Funding
Agentschap Innoveren en Ondernemen
References (26)
Show source-provided references
1. Al-Qadi I. L. Ozer H. Lambros J. Khatib A. E. Singhvi P. Khan T. Rivera-Perez J. & Doll B. (2015). Testing protocols to ensure performance of high asphalt binder replacement mixes using RAP and RAS [Tech Report]. https://rosap.ntl.bts.gov/view/dot/29648.
2. 10.1016/j.eiar.2016.04.00510.1016/j.eiar.2016.04.005 ↗
3. 10.1016/j.conbuildmat.2016.04.01510.1016/j.conbuildmat.2016.04.015 ↗
4. 10.1177/036119811984128210.1177/0361198119841282 ↗
5. 10.1016/j.jclepro.2019.05.20910.1016/j.jclepro.2019.05.209 ↗
6. 10.1016/j.ijfatigue.2017.11.01310.1016/j.ijfatigue.2017.11.013 ↗
7. 10.1016/j.conbuildmat.2019.07.19110.1016/j.conbuildmat.2019.07.191 ↗
8. 10.1016/j.conbuildmat.2013.12.02510.1016/j.conbuildmat.2013.12.025 ↗
9. 10.1016/j.jclepro.2020.12559610.1016/j.jclepro.2020.125596 ↗
10. 10.1016/j.conbuildmat.2018.02.01410.1016/j.conbuildmat.2018.02.014 ↗
11. Kim Y.-R. Haghshenas H. Nabizadeh H. & Santosh K. (2016). Research on High-RAP Asphalt Mixtures with Rejuvenators and WMA Additives [Tech Report]. https://rosap.ntl.bts.gov/view/dot/31604.
12. 10.1080/14680629.2021.190570010.1080/14680629.2021.1905700 ↗
13. 10.1016/j.resconrec.2021.10601410.1016/j.resconrec.2021.106014 ↗
14. 10.1016/j.conbuildmat.2022.12769810.1016/j.conbuildmat.2022.127698 ↗
15. 10.1016/j.ijprt.2017.03.01110.1016/j.ijprt.2017.03.011 ↗
16. 10.1080/14680629.2017.130425910.1080/14680629.2017.1304259 ↗
17. 10.1016/j.ijtst.2020.12.00110.1016/j.ijtst.2020.12.001 ↗
18. 10.1080/14680629.2020.182634810.1080/14680629.2020.1826348 ↗
19. 10.1016/j.conbuildmat.2021.12602610.1016/j.conbuildmat.2021.126026 ↗
20. Tanghe T. Vansteenkiste S. & Vanelstraete A. (2021). Development of a protocol for the initial type testing of asphalt mixtures with the use of rejuvenators. (Ed.) (Eds.). 7th Eurasphalt & Eurobitume Congress Madrid Spain.
21. 10.1080/14680629.2016.126675710.1080/14680629.2016.1266757 ↗
22. Vansteenkiste S. Tanghe T. Duerinckx B. Vanelstraete A. Porot L. Govers B. Libbrecht D. & Modde P. P. (2021). Impact of bio-based rejuvenator on bitumen and asphalt mix performance – laboratory and field evaluation. (Ed.) (Eds.). 7th Eurasphalt & Eurobitume Congress Madrid Spain.
23. 10.1061/(ASCE)MT.1943-5533.000203710.1061/(ASCE)MT.1943-5533.0002037 ↗
24. 10.1080/14680629.2016.126677410.1080/14680629.2016.1266774 ↗
25. 10.1016/j.conbuildmat.2018.11.23910.1016/j.conbuildmat.2018.11.239 ↗
26. 10.1016/j.conbuildmat.2014.07.03510.1016/j.conbuildmat.2014.07.035 ↗