An alternative approach for characterization of the linear viscoelastic behavior of asphalt binders
Source abstract
Abstract
This study aimed to develop an alternative approach to characterise the linear viscoelastic behaviour of asphalt binders. A rheogram model was firstly proposed based on the Carreau–Yasuda model; its accuracy was substantiated by high R2 values. The dynamic shear modulus master curve model was then obtained using the relationship between the magnitude of complex viscosity and dynamic shear modulus and the two definitions of the time-temperature shift factor. Afterwards, the phase angle master curve model was derived according to the approximate Kramers–Kronig relation. The proposed approach was demonstrated to be capable of accurately characterising the linear viscoelastic behaviour of selected asphalt binders. In addition, the predicted zero shear viscosity (ZSV) could be potentially employed to evaluate the asphalt binder rutting resistance. Compared with the widely-used Christensen-Anderson-Marasteanu (CAM) model, the developed master curves models were better at constructing the phase angle master curves of selected asphalt binders.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Rheology and Fluid Dynamics Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Environmental Engineering, University of Sharjah, Sharjah, UAE
Department of Public Works Engineering, College of Engineering, Mansoura University, Mansoura, Egypt
School of Automotive and Transportation Engineering, Hefei University of Technology, Hefei, People’s Republic of China
Research Institute of Sciences and Engineering, University of Sharjah, Sharjah, UAE
Jordan University of Science and Technology, Irbid, Jordan
School of Civil and Hydraulic Engineering, Huazhong University of Science and Technology, Wuhan, People’s Republic of China
References (44)
Show source-provided references
1. 10.1080/14680629.2002.968993310.1080/14680629.2002.9689933 ↗
2. 10.3141/2373-1210.3141/2373-12 ↗
3. 10.1617/s11527-013-0191-510.1617/s11527-013-0191-5 ↗
4. ASTM D2872. (2019). Standard test method for effect of heat and air on a moving film of asphalt (Rolling Thin-Film Oven Test).
5. ASTM D6373. (2016). Standard specification of performance graded asphalt binder. ASTM International.
6. ASTM D6521. (2022). Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV).
7. ASTM D7173. (2014). Standard practice for determining the separation tendency of polymer from polymer-modified asphalt. ASTM International.
8. ASTM D7175. (2015). Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer.
9. 10.1007/BF0152070110.1007/BF01520701 ↗
10. 10.1122/1.54927610.1122/1.549276 ↗
11. CEN/TS 15324. (2008). Bitumen and bituminous binders–determination of equiviscous temperature based on low shear viscosity using dynamic shear rheometer in low frequency oscillatory mode. European Committee for Standardization.
12. CEN/TS 15325. (2008). Bitumen and bituminous binders–determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode. European Committee for Standardization.
13. 10.1080/14680629.2006.969005910.1080/14680629.2006.9690059 ↗
14. Christensen, D. W., & Anderson, D. A. (1992). Interpretation of dynamic mechanical test data for paving grade asphalt cements. Journal of the Association of Asphalt Paving Technologists, 61, 67–116.
15. 10.1016/0095-8522(65)90022-X10.1016/0095-8522(65)90022-X ↗
16. 10.1080/14680629.2004.968999210.1080/14680629.2004.9689992 ↗
17. 10.1080/14680629.2015.105533510.1080/14680629.2015.1055335 ↗
18. 10.1080/14680629.2018.144750410.1080/14680629.2018.1447504 ↗
19. 10.1080/10298436.2017.127949010.1080/10298436.2017.1279490 ↗
20. 10.1177/036119811985533210.1177/0361198119855332 ↗
21. Harrigan, E. T., Leahy, R. B., & Youtcheff, J. S. (1994). Superpave manual of specifications, test methods and practices. SHRP–A–379. Strategic Highway Research Program, National Research Council.
22. Johnson C. & Bahia H. U. (2010). Evaluation of an accelerated procedure for fatigue characterization of asphalt binders. Submitted for publication in Road Materials and Pavement Design.
23. 10.1016/j.conbuildmat.2017.06.14310.1016/j.conbuildmat.2017.06.143 ↗
24. 10.1016/j.conbuildmat.2017.12.20410.1016/j.conbuildmat.2017.12.204 ↗
25. 10.1080/10298436.2021.202027110.1080/10298436.2021.2020271 ↗
26. 10.1617/s11527-020-01468-x10.1617/s11527-020-01468-x ↗
27. 10.1617/s11527-020-01538-010.1617/s11527-020-01538-0 ↗
28. Marasteanu, M. O., & Anderson, D. A. (1999a). Booij and Thoone approximation and master curve generation. In Eurobitume workshop on performance related properties for bituminous binders.
29. Marasteanu, M. O., & Anderson, D. A. (1999b). Improved model for bitumen rheological characterization. In Eurobitume workshop on performance related properties for bituminous binders.
30. 10.3141/1766-0510.3141/1766-05 ↗
31. 10.1080/10298436.2017.134743610.1080/10298436.2017.1347436 ↗
32. 10.1080/14680629.2003.968994610.1080/14680629.2003.9689946 ↗
33. 10.1080/14680629.2017.138907110.1080/14680629.2017.1389071 ↗
34. 10.1016/j.ijprt.2016.01.00510.1016/j.ijprt.2016.01.005 ↗
35. 10.1080/14680629.2014.92705010.1080/14680629.2014.927050 ↗
36. 10.1061/(ASCE)MT.1943-5533.000149710.1061/(ASCE)MT.1943-5533.0001497 ↗
37. 10.1007/BF0151572110.1007/BF01515721 ↗
38. 10.1016/j.conbuildmat.2016.07.04710.1016/j.conbuildmat.2016.07.047 ↗
39. 10.1080/14680629.2011.971389910.1080/14680629.2011.9713899 ↗
40. 10.1007/BF0151305910.1007/BF01513059 ↗
41. 10.1016/j.conbuildmat.2010.11.08610.1016/j.conbuildmat.2010.11.086 ↗
42. 10.1016/j.conbuildmat.2022.12679410.1016/j.conbuildmat.2022.126794 ↗
43. 10.1016/j.conbuildmat.2021.12606310.1016/j.conbuildmat.2021.126063 ↗
44. 10.1080/10298436.2020.177476610.1080/10298436.2020.1774766 ↗