Evaluation of complex modulus and fatigue properties of cold recycled material mixtures using small-scale specimens
Source abstract
Abstract
The laboratory mechanical characterisation of cold recycled materials mixtures is necessary to develop mechanistic-empirical design methods for cold recycled pavements. The present paper describes a laboratory experiment where small-scale specimens were used to characterise the complex modulus and fatigue properties of cement bitumen treated materials (CBTM) manufactured with bitumen emulsion and cement. In particular, CBTM specimens with diameter of 38 mm were tested and compared with two group of specimens with diameters of 100 and 75 mm. The complex modulus was measured by means of cyclic compression tests and then rheological modelling was applied. Fatigue tests were carried out in direct tension mode of loading. All tests were carried out at long-term curing conditions. Results and statistical analysis showed that the complex modulus values measured on large specimens (diameter of 100 and 75 mm), were not significantly different. On the other hand, the stiffness modulus values measured on small specimens (diameter of 38) were about 15% lower.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil and Building Engineering and Architecture, Università Politecnica delle Marche, Ancona, Italy
References (30)
Show source-provided references
1. AASHTO TP 107. (2018). Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test.
2. AASHTO TP 132. (2019). Standard Method of Test for Determining the Dynamic Modulus for Asphalt Mixtures Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT).
3. AASHTO TP 133. (2021). Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test.
4. Asphalt Academy. (2020). Technical Guideline TG2: Bitumen stabilized materials: A Guideline for the Design and Construction of Bitumen Emulsion and Foamed Bitumen Stabilized materials 3rd Edition. Pretoria South Africa.
5. Bowers, B. F., Diefenderfer, B. K., & Diefenderfer, S. D. (2015). Evaluation of dynamic modulus in asphalt paving mixtures utilizing small-scale specimen geometries. Journal of the Association of Asphalt Paving Technologists, 84, 497–526.
6. Castorena C. Kim Y. R. Pape S. & Lee K. (2017). Development of Small Specimen Geometry for Asphalt Mixture Performance Testing IDEA Program Final Report NCHRP IDEA Project N-181 .
7. 10.3141/1723-1610.3141/1723-16 ↗
8. 10.1016/j.conbuildmat.2017.09.03210.1016/j.conbuildmat.2017.09.032 ↗
9. 10.1016/j.jtte.2019.02.00210.1016/j.jtte.2019.02.002 ↗
10. 10.1016/j.conbuildmat.2019.11782510.1016/j.conbuildmat.2019.117825 ↗
11. EN 12697-1-2012. Bituminous mixtures – Test methods – Part 1: Soluble binder content.
12. EN 12697-5-2008. Bituminous mixtures – Test methods – Part 5: Determination of the maximum density.
13. EN 12697-6: 2020. Bituminous Mixtures – Test Methods – Part 6: Determination of Bulk Density of Bituminous Specimens.
14. EN 12697-8: 2018. Bituminous mixtures – Test methods – Part 8: Determination of void characteristics of bituminous specimens.
15. EN 13108-1:2016. Bituminous mixtures – Material specifications – Part 1: Asphalt Concrete.
16. EN 13242: 2002. Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction.
17. 10.1617/s11527-012-9971-610.1617/s11527-012-9971-6 ↗
18. 10.1122/1.350352910.1122/1.3503529 ↗
19. 10.1080/14680629.2017.127907310.1080/14680629.2017.1279073 ↗
20. 10.1016/j.conbuildmat.2018.04.09110.1016/j.conbuildmat.2018.04.091 ↗
21. 10.1520/JTE2018090510.1520/JTE20180905 ↗
22. 10.1617/s11527-020-01515-710.1617/s11527-020-01515-7 ↗
23. 10.1080/14680629.2016.126172610.1080/14680629.2016.1261726 ↗
24. 10.1080/14680629.2019.163378110.1080/14680629.2019.1633781 ↗
25. 10.1080/14680629.2003.8994610.1080/14680629.2003.89946 ↗
26. 10.1177/036119811879084510.1177/0361198118790845 ↗
27. 10.1007/s11043-018-09404-x10.1007/s11043-018-09404-x ↗
28. 10.17226/2490210.17226/24902 ↗
29. 10.1016/j.conbuildmat.2022.12872510.1016/j.conbuildmat.2022.128725 ↗
30. 10.1080/14680629.2013.77475210.1080/14680629.2013.774752 ↗