Comparative mechanistic-empirical analysis for design of alternative cold recycled asphalt technologies with conventional pavement
Source abstract
Abstract
It is essential to carry out a detailed study on the mechanical behaviour of materials so as to evaluate the distress parameters of flexible pavements. This study can be performed through finite element simulations like ANSYS, KENPAVE, IITPAVE, etc. However, this study was mainly carried out using the pavement designing tool ANSYS to study and compare the mechanical behaviour of a typical conventional pavement with hot bituminous surfacing, with cold recycled emulsified and foamed base pavements with fresh overlay. Further, the results obtained from this ANSYS were compared with other simulations like KENPAVE and IITPAVE. Optimum design thickness of the pavement was determined based upon the predicted tensile and compressive strain from laboratory resilient modulus values. The analytical results showed that, linear elastic analysis in both KENPAVE and IITPAVE match well, but a slight lesser tensile strain and vertical displacement values are observed in ANSYS. Also, the study was extended towards the comparative cost benefit analysis of both recycled and conventional mixes. Through this study, it was observed that recycled mix is economical when compared to conventional mixes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Flexible Pavement Division, CSIR- Central Road Research Institute, New Delhi, India
References (10)
Show source-provided references
1. Asphalt Academy · 2009
2. Asphalt Institute · 1981
3. Chen, D. H., Zaman, M., Laguros, J. & Soltani, A. (1995). Assessment of computer programs for analysis of flexible pavement structure (pp. 123–133). Transportation Research Record 1482. Washington, DC: Transportation Research Board.
4. Duncan, J. M., Monismith, C. L. & Wilson, E. L. (1968). Finite element analyses of pavements (pp. 18–33). Highway Research Record 228. Washington, DC: TRB, National Research Council.
5. Federal Highway Administration (FHWA) · 2002
6. Hjelmstad K. D. · 1997 · 125
7. Sahoo U. C. · International Journal of Pavement Research and Technology, Chinise Society of Pavement Engineering · 2010 · 3 · 320
8. Shell · 1978
9. Wirtgen · 2012
10. Zaghloul, S. & White, T. (1992). Use of three-dimensional dynamic finite element program for analysis of flexible pavement (pp. 60–69). Transportation Research Record, No.1388. Washington, DC: Transportation Research Board.