Rolling resistance and tyre/road noise on rubberised asphalt pavement in Poland
Source abstract
Abstract
The paper presents results of tyre/road noise and rolling resistance measurements performed on stone mastics asphalt (SMA) that contains rubberised asphalt, developed and produced by a refinery in Poland. Bituminous binder was modified with polymer and addition of crumb rubber. The first observations of asphalt mixture with the new kind of modified bitumen used on the field section are presented. Rolling resistance of passenger car tyres was measured by test trailer R2 Mk.2. Tyre/road noise was measured by a Tiresonic Mk.4 trailer using the close proximity method. Measurements were performed for 50 and 80 km/h and the results obtained on test and reference sections covered with conventional SMA 11 were compared.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Transport Systems and Technology · Infrastructure Maintenance and Monitoring
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Material Science, Technical University of Gdańsk, Gdańsk, Poland
Department of Highway Engineering, Technical University of Gdańsk, Gdańsk, Poland
Department of Automotive Engineering, Technical University of Gdańsk, Gdańsk, Poland
Department of Research and Development, LOTOS Asfalt Sp. z o.o., Gdańsk, Poland
Funding
Polish National Centre for Research and Development (NCBiR) - Programme CORE · Polish National Centre for Research and Development (NCBiR) - Programme SPB
References (28)
Show source-provided references
1. Bonaquist, R. (2008). Refining the simple performance tester for use in routine practice (NCHRP Report 614). Washington DC: Transportation Research Board.10.17226/14158 ↗
2. CALTRANS. (2003). Asphalt rubber usage guide. Materials engineering and testing services-MS #5, January 2003. Retrieved from http://www.dot.ca.gov/hq/esc/Translab/ormt/pdf/Caltrans_Asphalt_Rubber_Usage_Guide.pdf (accessed 16 January 2016).
3. Czajkowski, P. & Kędzierska, A. (2013). Polymer-rubber modified bitumen MODBIT (in Polish). Quarterly Asphalt Pavements 1/2013 (in Polish – Nawierzchnie Asfaltowe), PSWNA Warsaw.
4. 10.1080/14680629.2006.969002510.1080/14680629.2006.9690025 ↗
5. Ejsmont, J. Świeczko-Żurek, B., Ronowski, G. & Wilde, W. J. (2014). Rolling resistance measurements at the MnROAD facility, round 2 (Research Project Final Report 2014–29), July 2014, St. Paul, MN: Minnesota Department of Transportation, Research Services & Library.
6. 10.1533/9780857093721.1.7210.1533/9780857093721.1.72 ↗
7. General Directorate for National Roads and Motorways (GDDKiA) · 2010
8. Ghaly N. F. · World Journal of Chemistry · 2008 · 3 · 42
9. Hicks, R. G., Cheng, D. & Duffy, T. (2010). Terminal blend rubberized asphalt (Tech Report: 2010 – 102TM). Chico, CA: California Pavement Preservation Center, p. 82.
10. ISO/DIS 11819-2 · 2012
11. Iwański M. · Structure and Environment · 2013 · 5 · 21
12. 10.1080/14680629.2008.969016310.1080/14680629.2008.9690163 ↗
13. Judycki, J., Dołżycki, B., Pszczoła, M., Jaczewski, M. & Szydłowski, C. (2014). Badania i analizy dotyczące zastosowania asfaltów modyfikowanych SBS oraz dodatkiem gumy do mieszanek mineralno-asfaltowych [Testing and analysis of the SBS and rubber modified bitumen in asphalt mixtures] (Unpublished Research Report in Polish for Grupa Lotos S.A.). Gdansk University of Technology.
14. Król, J., Czajkowski, P., Radziszewski, P., Kowalski, K. J. & Sarnowski, M. (2013). Viscoelastic properties of polymer and crumb rubber modified bitumen. Laboratory and field investigation. Paper presented at international scientific conference, Road Research and Administration, Car 2013, Bucharest, 4–5 July.
15. Król, J., Radziszewski, P., Piłat, J., Kowalski, K. J. & Sarnowski, M. (2012). Ocena wpływu zastosowania przyjaznych dla środowiska lepiszczy gumowo-asfaltowych produkowanych w technologii Grupy Lotos S.A. na właściwości drogowych mieszanek mineralno-asfaltowych [The impact assessment of environmental friendly rubberized asphalt binders manufactured by Lotos S.A. on parameters of road asphalt mixtures] (Unpublished Research Report in Polish for Grupa Lotos S.A.), Warsaw University of Technology.
16. Król J. · Magazyn Autostrady · 2013 · 5 · 82
17. LEO. (2013). Low Emission Optimised tyres and road surfaces for electric and hybrid vehicles, Polish-Norwegian Research Programme CORE, project “LEO” No. 196195/2013. Retrieved from http://www.leo.mech.pg.gda.pl/
18. McGennis, R. B., Shuler, S. & Bahia, H. U. (1994). Background of SUPERPAVE asphalt binder test methods (Report No. FHWA-SA-94-069). Washington, D.C.: Federal Highway Administration.
19. 10.1016/j.fuel.2004.04.00310.1016/j.fuel.2004.04.003 ↗
20. 10.1002/app.2533610.1002/app.25336 ↗
21. PN-EN 12697-21 · 2012
22. PN-EN 12697-22 · 2008
23. PN-EN 12697-46 · 2012
24. PN-EN 13108-5 · 2008
25. PN-EN 14023 · 2011
26. 10.1080/10298436.2015.101949310.1080/10298436.2015.1019493 ↗
27. Sandberg U. · 2002
28. 10.1002/fam.223110.1002/fam.2231 ↗