Comparison of rheological parameters of asphalt binders obtained from bending beam rheometer and dynamic shear rheometer at low temperatures
Source abstract
Abstract
In this paper, an investigation was performed to determine if the complex modulus obtained from frequency sweeps performed with the dynamic shear rheometer (DSR) can be used to accurately predict the creep compliance obtained experimentally using the bending beam rheometer (BBR). Two sets of asphalt binders were tested at low, intermediate, and high temperatures and the results were analysed using 2S2P1D and DBN rheological models. DSR and BBR testing was performed in two different laboratories using different equipment manufacturers. It was found that significant differences are observed between the creep stiffness obtained with DSR and BBR devices, most likely due to the different preparation and conditioning of the test specimens in different cooling media.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
,
Technische Universität Braunschweig, ISBS, Beethovenstraße 51b, 38106 Braunschweig, Germany
References (43)
Show source-provided references
1. AASHTO M320-10-UL. (2010). Standard specification for performance-graded asphalt binder. Washington, DC: Author.
2. AASHTO T313-12-UL. (2012). Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR). Washington, DC: Author.
3. AASHTO T315-12-UL. (2012). Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). Washington, DC: Author.
4. Anderson, D. A., Christensen, D. W., Bahia, H. U., Dongre, R., Sharma, M. G., Antle, C. E., & Button, J. (1994). Binder characterization and evaluation (SHRP A-369 Vol 3, Physical Characterization). Washington, DC: Strategic Highway Research Program, National Research Council.
5. Anderson D. A. & Marasteanu M. O. (1999). Physical aging of asphalt binders relative to their glass transition temperature. Transportation Research Board annual meeting Washington DC.10.3141/1661-05 ↗
6. Anderson, D. A., Marasteanu, M. O., & Liu, Y. (1999). Dilatometric measurements of glass transition temperatures. Luxembourg: Eurobitume Workshop.
7. 10.1617/s11527-013-0015-710.1617/s11527-013-0015-7 ↗
8. Bahia H. U. (1991). Low-temperature isothermal physical hardening of asphalt cements (doctoral dissertation). Pennsylvania State University University Park PA.
9. 10.1080/14680629.2014.92661810.1080/14680629.2014.926618 ↗
10. Cannone Falchetto, A., Marasteanu, M. O., & Di Benedetto, H. (2011). Analogical based approach to forward and inverse problems for asphalt materials characterization at low temperatures. Journal of the Association of Asphalt Paving Technologists, 80, 549–581.
11. 10.1080/0884375920891601910.1080/08843759208916019 ↗
12. 10.1080/14680629.2009.969018010.1080/14680629.2009.9690180 ↗
13. 10.1061/(ASCE)1532-3641(2007)7:2(149)10.1061/(ASCE)1532-3641(2007)7:2(149) ↗
14. 10.1080/14680629.2007.969007610.1080/14680629.2007.9690076 ↗
15. 10.1080/14680629.2011.969035610.1080/14680629.2011.9690356 ↗
16. Di Benedetto, H., & Olard, F. (2009). DBN law for the thermo-visco-elasto-plastic behaviour of asphalt concrete. In Y. Richard Kim (Ed.), Modeling of asphalt concrete (pp. 245–263). New York, NY: ASCE Press, Mc Graw-Hill Construction.
17. 10.1080/14680629.2004.968999210.1080/14680629.2004.9689992 ↗
18. 10.1080/14680629.2009.969022710.1080/14680629.2009.9690227 ↗
19. EN 1426. (2007). Bitumen and bituminous binders – determination of needle penetration. Brussels: European Committee for Standardization.
20. EN 1427. (2007). Bitumen and bituminous binders – determination of the softening point - Ring and ball method. Brussels: European Committee for Standardization.
21. EN 14770. (2012). Bitumen and bituminous binders – determination of complex shear modulus and phase angle – Dynamic shear rheometer (DSR). Brussels: European Committee for Standardization.
22. EN 14771. (2012). Bitumen and bituminous binders – determination of the flexural creep stiffness - Bending beam rheometer (BBR). Brussels: European Committee for Standardization.
23. Farrar, M., Sui, C., Salmans, S., & Qin, Q. (2013). Determining the low temperature rheological properties of asphalt binder using a dynamic shear rheometer (DSR) (Product: FP 08). Laramie, WY: Fundamental Properties of Asphalts and Modified Asphalts, III, Western Research Institute.
24. Ferry, J. D. (1980). Viscoelastic properties of polymers. New York, NY: John Wiley.
25. Huet C. (1963). Etude par une méthode d'impédance du comportement viscoélastique des matériaux hydrocarbonés (Doctoral dissertation). Faculté des sciences de Paris Paris [in French].
26. 10.1080/14680629.2013.77475110.1080/14680629.2013.774751 ↗
27. 10.1080/14680629.2013.87063910.1080/14680629.2013.870639 ↗
28. Marasteanu, M. O., & Anderson, D. A. (2000). Comparison of moduli for asphalt binders obtained from different test devices. Journal of the Association of Asphalt Paving Technologists, 69, 574–607.
29. Marasteanu M. O. Cannone Falchetto A. Turos M. & Le J-L. (2012). Development of a simple test to determine the low temperature strength of asphalt mixtures and binders (Report NCHRP IDEA 151). Washington DC: Transportation Research Board.
30. 10.1080/14680629.2013.81735110.1080/14680629.2013.817351 ↗
31. 10.1016/j.conbuildmat.2012.04.13610.1016/j.conbuildmat.2012.04.136 ↗
32. 10.1080/14680629.2001.968989410.1080/14680629.2001.9689894 ↗
33. 10.1080/19648189.2009.969317610.1080/19648189.2009.9693176 ↗
34. 10.1617/s11527-012-9954-710.1617/s11527-012-9954-7 ↗
35. 10.1080/14680629.2011.64408210.1080/14680629.2011.644082 ↗
36. 10.1061/(ASCE)MT.1943-5533.000065810.1061/(ASCE)MT.1943-5533.0000658 ↗
37. 10.1080/14680629.2003.968994610.1080/14680629.2003.9689946 ↗
38. Olard, F., & Di Benedetto, H. (2005). The DBN model: A thermo-visco-elasto-plastic approach for pavement behavior modeling. Application to direct tension test and thermal stress restrained specimen test. Journal of the Association of Asphalt Paving Technologists, 74, 791–827.
39. 10.1080/14680629.2010.969032910.1080/14680629.2010.9690329 ↗
40. 10.1617/s11527-009-9491-110.1617/s11527-009-9491-1 ↗
41. 10.1617/s11527-011-9820-z10.1617/s11527-011-9820-z ↗
42. 10.1080/14680629.2013.87109110.1080/14680629.2013.871091 ↗
43. 10.1080/14680629.2011.971389910.1080/14680629.2011.9713899 ↗