Performance improvement of slurry seal by glass powder: mechanical evaluation and life cycle assessment
Source abstract
Abstract
This study evaluates the improvement in the mechanical, microstructural, and environmental performance of slurry seal mixtures by replacing conventional fillers with waste glass powder (WGP). Mixing time test, wet cohesion test, loaded wheel test-sand adhesion, wet track abrasion test, loaded wheel test-deformation and surface free energy were done for mechanical and microstructural evaluation. Results showed that horizontal and vertical displacement of the conventional slurry seal (without WGP) were 47% and 31% higher than those of the conventional microsurfacing; however, horizontal and vertical displacement of the slurry seal with 75% WGP were only 19% and 13% higher than those of the conventional microsurfacing, respectively. Moreover, the replacement improved the cohesive energy of slurry seal mastic by 43%. A life cycle assessment (LCA) also showed that the greenhouse emissions and acidification potential of the slurry seal with 100% WGP were approximately 18% and 28% lower than those of the conventional microsurfacing, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Materials Engineering and Processing · Coal Combustion and Slurry Processing · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Edith Cowan University
Babol Noshirvani University of Technology
Iran University of Science and Technology
University of Nevada
Funding
Iran University of Science and Technology
References (41)
Show source-provided references
1. 10.1016/j.jclepro.2022.13247110.1016/j.jclepro.2022.132471 ↗
2. 10.1016/j.conbuildmat.2021.12495810.1016/j.conbuildmat.2021.124958 ↗
3. 10.1016/j.watres.2022.11858410.1016/j.watres.2022.118584 ↗
4. 10.1177/036119811882187410.1177/0361198118821874 ↗
5. 10.1061/(ASCE)0899-1561(2007)19:8(634)10.1061/(ASCE)0899-1561(2007)19:8(634) ↗
6. 10.3141/2001-0510.3141/2001-05 ↗
7. Bodin D. Zhalehjoo N. Pike S. Harrison J. Latter L. Garton D. Rice Z. Thomas L. & Moffatt M. (2022). Development of a specification for recycled crushed glass as a sand aggregate replacement (No. 1922700207.
8. 10.1016/j.conbuildmat.2020.11800410.1016/j.conbuildmat.2020.118004 ↗
9. 10.1016/j.conbuildmat.2019.07.21310.1016/j.conbuildmat.2019.07.213 ↗
10. Eurobitume. (2019). The eurobitume life-cycle inventory for Bitumen. https://eurobitume.eu/bitumen-life-cycle-inventory/.
11. 10.1016/j.conbuildmat.2021.12398010.1016/j.conbuildmat.2021.123980 ↗
12. 10.1016/j.conbuildmat.2014.09.04210.1016/j.conbuildmat.2014.09.042 ↗
13. 10.1016/j.conbuildmat.2020.11947410.1016/j.conbuildmat.2020.119474 ↗
14. 10.1061/JPEODX.000023910.1061/JPEODX.0000239 ↗
15. 10.1016/j.conbuildmat.2018.10.09110.1016/j.conbuildmat.2018.10.091 ↗
16. ISSA. (2017a). Test method to classify emulsified asphalt/aggregate mixture systems by modified cohesion tester measurement of set and cure characteristics. Technical Bulletin 139.
17. ISSA. (2017b). Test method for measurement of excess asphalt in bituminous mixtures by use of a loaded wheel tester and sand adhesion design technical bulletins No. 109. Annapolis (Md.): International Slurry Surfacing Association (revised). International slurry surfacing association Glen Ellyn IL.
18. ISSA A105. (2010). Recommended performance guidelines for emulsified asphalt slurry seal. International Slurry Surfacing Association Annapolis MD.
19. ISSA A143. (2010). Recommended performance guidelines for micro-surfacing. International Slurry Surfacing Association Annapolis MD.
20. ISSA TB100. (2020). Laboratory test method for wet track abrasion of slurry surfacing systems. International Slurry Surfacing Association.
21. ISSA TB147. (2005). Test Method for measurement of stability and resistance to compaction vertical and lateral displacement of multilayered fine aggregate cold mixes. International slurry surfacing association Glen Ellyn IL USA Technical.
22. Jalalian Khoshnood, A., Kamboozia, N., Ziari, H., & Zalnezhad, M. (2022). Evaluation of performance characteristics of polymer-modified slurry seal (PMSS) by replacing filler with ceramic waste powder. Road Materials and Pavement Design, 24(9), 1–18.
23. 10.1080/14680629.2019.158877810.1080/14680629.2019.1588778 ↗
24. 10.1016/j.jclepro.2015.10.10110.1016/j.jclepro.2015.10.101 ↗
25. 10.1007/s11367-018-1480-610.1007/s11367-018-1480-6 ↗
26. 10.1016/j.conbuildmat.2020.12133610.1016/j.conbuildmat.2020.121336 ↗
27. 10.1016/j.conbuildmat.2023.13227110.1016/j.conbuildmat.2023.132271 ↗
28. 10.1061/(ASCE)MT.1943-5533.000417010.1061/(ASCE)MT.1943-5533.0004170 ↗
29. 10.1016/j.resconrec.2021.10601410.1016/j.resconrec.2021.106014 ↗
30. 10.3390/ma1414386710.3390/ma14143867 ↗
31. 10.1177/036119811882190810.1177/0361198118821908 ↗
32. 10.1016/j.scitotenv.2020.14184210.1016/j.scitotenv.2020.141842 ↗
33. 10.1080/14680629.2017.140781810.1080/14680629.2017.1407818 ↗
34. 10.1016/j.scitotenv.2023.16348810.1016/j.scitotenv.2023.163488 ↗
35. 10.1021/cr00088a00610.1021/cr00088a006 ↗
36. 10.3141/2051-1010.3141/2051-10 ↗
37. 10.1016/j.conbuildmat.2021.12560410.1016/j.conbuildmat.2021.125604 ↗
38. 10.1016/j.jclepro.2018.12.22710.1016/j.jclepro.2018.12.227 ↗
39. 10.1016/j.conbuildmat.2022.12913210.1016/j.conbuildmat.2022.129132 ↗
40. 10.1061/(ASCE)TE.1943-5436.000039510.1061/(ASCE)TE.1943-5436.0000395 ↗
41. 10.28991/cej-2020-0309146510.28991/cej-2020-03091465 ↗