Design and experiment of KH550 modified high transparency clear asphalt and light colored asphalt pavement
Source abstract
Abstract
In this study, clear asphalt (CA) modified by a silane coupling agent (KH550) was prepared. A light-colored asphalt mixture (LCAM) was prepared by mixing CA and limestone aggregate. The properties of CA were analyzed by performing the asphalt conventional test, pull-off test, optical test, Fourier-transform infrared spectroscopy, dynamic shear rheometer examinations, and contact angle test. The road performance, chromatic and reflectivity properties of the LCAM specimens were evaluated. The results indicated that the transparency of CA was 76.5%, and the modification of KH550 improved the adhesion of CA. The thermal stability and low-temperature crack resistance of CA were better than those of conventional asphalt. After modification with KH550, the dynamic stability of LCAM decreased, and the moisture resistance and lowtemperature performance increased. The LCAM had higher RGB values and higher reflective performance. Overall, the CA and LCAM materials that we prepared can be used effectively for future road paving.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of civil engineering, Tsinghua University, Beijing, People’s Republic of China
References (61)
Show source-provided references
1. AASHTO TP 91. (2015). Standard method of test for determining asphalt binder bond strength by means of the binder bond strength (BBS) test. American Association of State Highway and Transportation Officials.
2. 10.1016/j.fuel.2008.01.01210.1016/j.fuel.2008.01.012 ↗
3. Association J. R. (2006). Pavement performance evaluation method. January .
4. ASTM D6927-22. (2022). Standard test method for marshall stability and flow of asphalt mixtures. American Society of Testing Materials.
5. 10.1016/j.conbuildmat.2019.02.10010.1016/j.conbuildmat.2019.02.100 ↗
6. 10.1016/j.conbuildmat.2021.12421210.1016/j.conbuildmat.2021.124212 ↗
7. 10.1080/14680629.2016.116514210.1080/14680629.2016.1165142 ↗
8. 10.1016/j.conbuildmat.2019.01.02810.1016/j.conbuildmat.2019.01.028 ↗
9. 10.1080/14680629.2018.153940810.1080/14680629.2018.1539408 ↗
10. 10.1016/j.egypro.2017.09.59010.1016/j.egypro.2017.09.590 ↗
11. 10.1016/j.conbuildmat.2018.02.15110.1016/j.conbuildmat.2018.02.151 ↗
12. 10.1155/2022/135310210.1155/2022/1353102 ↗
13. GB/T 1884-2000. (2000). Crude petroleum and liquid petroleum products-Laboratory determination of density-Hydrometer method. The State Bureau of Quality and Technical Supervision.
14. GB/T 2294-2019. (2019). Determination of softening point in solid products of coal carbonization. State Administration for Market Regulation.
15. GB/T 2295-2008. (2008). Determination of the ash content of coking solid products. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
16. GB/T 24138. (2022). Petroleum resin. State Administration for Market Regulation.
17. GB/T 262-2010. (2010). Petroleum products and hydrocarbon solvents-Determination of aniline point and mixed aniline point. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
18. GB/T 2895-2008. (2008). Plastics-Polyester resin-Determination of partial acid value and total acid value. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
19. GB/T 32984-2016. (2016). Color asphalt concrete. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
20. GB/T 3535. (2006). Petroleum products-Determination of pour point. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
21. GB/T 3536-2008. (2008). Petroleum products-Determination of flash and fire points-Cleveland open cup method. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
22. GB/T 4945. (2002). Standard test method for acid and base number of petroleum products and lubricants by Colour-indicator titration. General Administration of Quality Supervision Inspection and Quarantine of the People's Republic of China.
23. 10.1016/j.conbuildmat.2022.12799110.1016/j.conbuildmat.2022.127991 ↗
24. 10.1016/j.jhazmat.2014.07.01810.1016/j.jhazmat.2014.07.018 ↗
25. HG/T 3660. (1999). Tests methods for melt viscosity of Hot-melt adhesives. State Bureau of Petroleum and Chemical Industries.
26. 10.1016/j.conbuildmat.2015.07.03210.1016/j.conbuildmat.2015.07.032 ↗
27. ISO 1133. (2022). Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method. International Organization for Standardization.
28. ISO 2781. (2008). Rubber, vulcanized or thermoplastic-Determination of density. International Organization for Standardization.
29. ISO 37. (2017). Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties. International Organization for Standardization.
30. ISO 868. (2003). Plastics and ebonite-Determination of indentation hardness by means of a durometer (Shore hardness). International Organization for Standardization.
31. JTG E20-2011. (2011). Standard test methods of bitumen and bituminous mixtures for highway engineering. Ministry of Tansport of the People's Republic of China.
32. JTG E42-2005. (2005). Test methods of aggregate for highway engineering. Ministry of Transport of the People's Republic of China.
33. JTG E60-2008. (2008). Field test methods of subgrade and pavement for highway engineering Ministry of Transport of the People's Republic of China.
34. JTG F40-2004. (2004). Technical specifications for construction of highway asphalt pavements. Ministry of Transport of the People's Republic of China.
35. 10.1016/j.polymer.2018.02.03810.1016/j.polymer.2018.02.038 ↗
36. 10.1016/j.conbuildmat.2020.12115510.1016/j.conbuildmat.2020.121155 ↗
37. 10.3141/2293-1410.3141/2293-14 ↗
38. 10.1080/14680629.2018.150792010.1080/14680629.2018.1507920 ↗
39. Mohamed M. & Mohamed A. R. (2010). Development of non-petroleum binders derived from fast pyrolysis bio-oils for use in flexible pavement Thesis . (Ph.D.)–Iowa State University].
40. 10.1016/j.eurpolymj.2004.12.00610.1016/j.eurpolymj.2004.12.006 ↗
41. 10.1080/14680629.2019.159323010.1080/14680629.2019.1593230 ↗
42. 10.1016/j.conbuildmat.2018.02.18610.1016/j.conbuildmat.2018.02.186 ↗
43. 10.1016/j.rser.2015.07.17710.1016/j.rser.2015.07.177 ↗
44. 10.3390/nano1011215210.3390/nano10112152 ↗
45. 10.3390/nano1011215210.3390/nano10112152 ↗
46. 10.1016/j.buildenv.2016.07.02810.1016/j.buildenv.2016.07.028 ↗
47. 10.1145/31336.3133810.1145/31336.31338 ↗
48. 10.1016/j.conbuildmat.2017.07.23910.1016/j.conbuildmat.2017.07.239 ↗
49. 10.1016/j.apsusc.2016.10.10210.1016/j.apsusc.2016.10.102 ↗
50. Song C. (2012). Study on the high visibility and rutting depth prediction model of bituminous mixture Beijing university of technology].
51. 10.1016/j.conbuildmat.2016.12.07310.1016/j.conbuildmat.2016.12.073 ↗
52. 10.1016/j.buildenv.2010.06.01410.1016/j.buildenv.2010.06.014 ↗
53. 10.1016/j.conbuildmat.2017.11.09810.1016/j.conbuildmat.2017.11.098 ↗
54. 10.4028/www.scientific.net/AMM.727-728.36210.4028/www.scientific.net/AMM.727-728.362 ↗
55. 10.1080/14680629.2019.161961910.1080/14680629.2019.1619619 ↗
56. 10.1016/j.conbuildmat.2019.11708910.1016/j.conbuildmat.2019.117089 ↗
57. 10.1016/B978-1-78242-380-5.00002-910.1016/B978-1-78242-380-5.00002-9 ↗
58. 10.1080/10298436.2017.140260210.1080/10298436.2017.1402602 ↗
59. 10.1080/14680629.2020.173022910.1080/14680629.2020.1730229 ↗
60. 10.1080/14680629.2020.184772710.1080/14680629.2020.1847727 ↗
61. 10.1016/j.conbuildmat.2021.12617810.1016/j.conbuildmat.2021.126178 ↗