The study of the feasibility and manufacture of slurry seal surface treatment with steel slag industry wastes: use of basic oxygen furnace (BOF) slag filler as raw material replacement
Source abstract
Abstract
Slurry seal is a preventive maintenance method to preserve pavement. This research is focused on the effect of steel slag filler (SSF) as a natural filler (NF) substitute on the behaviour of slurry seal mixtures. Five different combinations containing 100% NF, 25% SSF + 75% NF, 50% SSF + 50% NF, 75% SSF + 25% NF, and 100% SSF based on the total filler weight were used. The samples were evaluated by the wet cohesion, wet track abrasion, loaded wheel-displacement, and loaded wheel-sand adhesion tests. For investigating the SSF impact on the performance characteristics of mixtures, an analysis of variance (ANOVA) was performed. The results indicated that mixtures with 75% SSF increase the bitumen cohesion by 45%, decrease the displacement by 50.8%, improve the abrasion resistance by 48.3%, and reduce the bleeding by 29.3%. ANOVA results showed that SSF has the greatest effect on increasing the adhesion and reducing the displacement in slurry seal.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Materials Engineering and Processing · Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Central Tehran Branch, Islamic Azad University, Tehran, Iran
Department of Civil Engineering, Shomal University, Mazandaran, Iran
Department of Civil Engineering, Iran University of Science and Technology (IUST), Tehran, Iran
Department of Civil Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
References (42)
Show source-provided references
1. 10.1016/j.jhazmat.2008.09.10510.1016/j.jhazmat.2008.09.105 ↗
2. Airey, G. D., Collop, A. C., & Thom, N. H. (2004). Mechanical performance of asphalt mixtures incorporating slag and glass secondary aggregates. In Proceedings of the 8th conference on asphalt pavements for Southern Africa (CAPSA’04), Sun City, South Africa (Vol. 12, pp. 16). Nothingham Centre for Pavement Engineering.
3. 10.1016/j.conbuildmat.2012.02.03610.1016/j.conbuildmat.2012.02.036 ↗
4. 10.1080/14680629.2016.118934910.1080/14680629.2016.1189349 ↗
5. 10.1016/j.buildenv.2005.08.02010.1016/j.buildenv.2005.08.020 ↗
6. 10.1179/1432891714Z.00000000096710.1179/1432891714Z.000000000967 ↗
7. 10.1080/14680629.2016.119714310.1080/14680629.2016.1197143 ↗
8. 10.1016/j.conbuildmat.2020.12148310.1016/j.conbuildmat.2020.121483 ↗
9. 10.1016/j.conbuildmat.2017.09.13610.1016/j.conbuildmat.2017.09.136 ↗
10. 10.1016/j.conbuildmat.2020.11898710.1016/j.conbuildmat.2020.118987 ↗
11. 10.1016/j.conbuildmat.2019.11727110.1016/j.conbuildmat.2019.117271 ↗
12. 10.1080/14680629.2021.190569810.1080/14680629.2021.1905698 ↗
13. 10.1016/j.conbuildmat.2020.11880810.1016/j.conbuildmat.2020.118808 ↗
14. 10.1016/j.conbuildmat.2017.03.14710.1016/j.conbuildmat.2017.03.147 ↗
15. 10.17226/1446410.17226/14464 ↗
16. 10.1016/j.conbuildmat.2018.10.12910.1016/j.conbuildmat.2018.10.129 ↗
17. 10.11113/jt.v69.252910.11113/jt.v69.2529 ↗
18. ISSA. (2017a). Laboratory test method for Wet track abrasion of slurry surfacing systems. Technical Bulletin. International slurry surfacing association.
19. ISSA. (2017b). Test method for measurement of excess asphalt in bituminous mixtures by Use of a loaded wheel tester and sand adhesion. Technical Bulletin. International slurry surfacing association.
20. ISSA. (2017c). Test method for measurement of stability and resistance to compaction, vertical and lateral displacement of multilayered fine aggregate cold mixes. Technical Bulletin. International Slurry Surfacing Association.
21. ISSA. (2017d). Test method to classify emulsified asphalt/aggregate mixture systems by modified cohesion tester measurement of set and cure characteristics. Technical Bulletin. International Slurry Surfacing Association.
22. ISSA. (2017e). Trial mix procedure for slurry seal design. Technical Bulletin. International Slurry Surfacing Association.
23. 10.1080/14680629.2020.186080310.1080/14680629.2020.1860803 ↗
24. Johannes, P. T. (2014). Development of an improved mixture design framework for slurry seals and micro-surfacing treatments. The University of Wisconsin-Madison.
25. 10.1016/j.conbuildmat.2014.08.05210.1016/j.conbuildmat.2014.08.052 ↗
26. 10.1080/14680629.2021.196381810.1080/14680629.2021.1963818 ↗
27. 10.1016/j.conbuildmat.2020.12133610.1016/j.conbuildmat.2020.121336 ↗
28. 10.1080/14680629.2017.142279110.1080/14680629.2017.1422791 ↗
29. 10.1016/j.conbuildmat.2020.11896110.1016/j.conbuildmat.2020.118961 ↗
30. 10.1080/14680629.2019.162012010.1080/14680629.2019.1620120 ↗
31. 10.1016/j.cemconres.2012.10.00410.1016/j.cemconres.2012.10.004 ↗
32. 10.1016/j.resconrec.2004.04.00610.1016/j.resconrec.2004.04.006 ↗
33. 10.1007/s40999-019-00475-610.1007/s40999-019-00475-6 ↗
34. 10.22119/jte.2019.6945910.22119/jte.2019.69459 ↗
35. 10.1016/j.conbuildmat.2007.11.00110.1016/j.conbuildmat.2007.11.001 ↗
36. 10.1080/14680629.2017.140781810.1080/14680629.2017.1407818 ↗
37. 10.1016/j.resconrec.2016.12.00910.1016/j.resconrec.2016.12.009 ↗
38. 10.1016/j.conbuildmat.2020.11981410.1016/j.conbuildmat.2020.119814 ↗
39. 10.1016/j.conbuildmat.2018.12.16410.1016/j.conbuildmat.2018.12.164 ↗
40. 10.1016/j.wasman.2017.01.02610.1016/j.wasman.2017.01.026 ↗
41. 10.1016/j.jtte.2018.12.00510.1016/j.jtte.2018.12.005 ↗
42. 10.1016/j.conbuildmat.2016.03.04310.1016/j.conbuildmat.2016.03.043 ↗