Field performance monitoring of pervious concrete pavements
Source abstract
Abstract
Pervious concrete pavements (PCP) have been successfully constructed in low-to-medium volume roads attributed to their sustainability benefits. Several studies have investigated the hydrological performance of PCPs, but limited attention has been given to the structural and environmental aspects. Thus, the objective of this study was to monitor the structural, hydrological and environmental performance of two PCP parking lots built using in-situ and ready-mix methods. Structural distresses were classified based on the distress identification manual, while the infiltration tests were performed every three months for three years to quantify the clogging rate. Joints/edges formed the weakest zones, while inefficient maintenance caused 98% clogging within 18 months. Further, in-situ mixing was 17% cheaper and 0.74% carbon-intensive than ready-mix technology. Overall, this research is envisioned to pave way for the development of guidelines that classify distresses and severity levels specific to PCPs, which also cover adequate maintenance recommendations for field implementation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Infrastructure Maintenance and Monitoring · Underground infrastructure and sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Section of Pavement Engineering, Faculty of Civil Engineering and Geosciences, Delft University of Technology, Delft, Netherlands
Department of Civil & Environmental Engineering, Indian Institute of Technology Tirupati, Tirupati, India
References (53)
Show source-provided references
1. ACI 309R. (2005). Guide for consolidation of concrete. American Concrete Institute.
2. 10.1061/JPEODX.000011710.1061/JPEODX.0000117 ↗
3. 10.1016/j.jclepro.2020.12509510.1016/j.jclepro.2020.125095 ↗
4. 10.1016/j.cscm.2019.e0023110.1016/j.cscm.2019.e00231 ↗
5. 10.1088/1757-899X/342/1/01208110.1088/1757-899X/342/1/012081 ↗
6. ASTM 1754/C1754-M. (2012). Test method for density and void content of hardened pervious concrete. ASTM International.
7. ASTM C1701/C1701. (2017). Test method for infiltration rate of in place pervious concrete. ASTM International.
8. ASTM C39. (2021). Standard test method for compressive strength of cylindrical concrete specimens. ASTM International.
9. 10.1617/s11527-016-0858-910.1617/s11527-016-0858-9 ↗
10. 10.1061/JPEODX.000006110.1061/JPEODX.0000061 ↗
11. 10.1520/ACEM2018003910.1520/ACEM20180039 ↗
12. 10.1016/j.conbuildmat.2014.12.07310.1016/j.conbuildmat.2014.12.073 ↗
13. 10.1061/(ASCE)HE.1943-5584.000042410.1061/(ASCE)HE.1943-5584.0000424 ↗
14. 10.1016/j.conbuildmat.2019.11717810.1016/j.conbuildmat.2019.117178 ↗
15. 10.1520/JAI10132010.1520/JAI101320 ↗
16. Delatte, N. (2017). Concrete pavement design, construction, and performance. CRC Press.
17. 10.1016/j.msea.2010.09.02410.1016/j.msea.2010.09.024 ↗
18. 10.1016/j.cscm.2013.10.00110.1016/j.cscm.2013.10.001 ↗
19. Harvey J. T. Meijer J. Ozer H. Al-Qadi I. L. Saboori A. & Kendall A. (2016). Pavement Life-Cycle Assessment Framework (FHWA-HIF-16-014; p. 244). Federal Highway Administration. https://www.fhwa.dot.gov/pavement/sustainability/hif16014.pdf
20. India Construction Materials Database of Embodied Energy and Global Warming Potential—Methodology Report . (2017). International Finance Corporation.
21. IRC 44. (2017). Guidelines for cement concrete mix design for pavements (p. 60). Indian Roads Congress. https://mis.wbprd.gov.in/Engineering/Codes/IRC44.pdf
22. ISO: 14040. (2006). Environmental management—Life cycle assessment—Principles and framework . International Organization for Standardization. https://www.iso.org/cms/render/live/en/sites/isoorg/contents/data/standard/03/74/37456.html
23. ISO: 14044. (2006). Environmental management—Life cycle assessment—Requirements and guidelines. International Organization for Standardization.
24. 10.1016/j.cscm.2021.e0062210.1016/j.cscm.2021.e00622 ↗
25. 10.1016/j.jenvman.2017.02.01810.1016/j.jenvman.2017.02.018 ↗
26. 10.1016/j.cemconres.2019.05.00410.1016/j.cemconres.2019.05.004 ↗
27. 10.1016/j.conbuildmat.2018.11.23010.1016/j.conbuildmat.2018.11.230 ↗
28. 10.1080/10298436.2018.150884410.1080/10298436.2018.1508844 ↗
29. Miller J. S. & Bellinger W. Y. (2014). Distress identification manual for the long-term pavement performance program (fifth revised edition) (FHWA-HRT-13-092; pp. 1–142). Federal Highway Administration. https://www.fhwa.dot.gov/publications/research/infrastructure/pavements/ltpp/13092/13092.pdf
30. 10.1016/j.conbuildmat.2014.09.08810.1016/j.conbuildmat.2014.09.088 ↗
31. 10.1061/(ASCE)MT.1943-5533.000007910.1061/(ASCE)MT.1943-5533.0000079 ↗
32. 10.1080/10298436.2019.168567110.1080/10298436.2019.1685671 ↗
33. 10.1080/14680629.2018.147479110.1080/14680629.2018.1474791 ↗
34. 10.1016/j.conbuildmat.2020.11867210.1016/j.conbuildmat.2020.118672 ↗
35. Singh A. (2021). Development of Pervious All-Road class All-weather Multilayered paver (PARAMpave) blocks [Ph.D. Dissertation]. Indian Institute of Technology Tirupati.
36. 10.1016/j.resconrec.2022.10618610.1016/j.resconrec.2022.106186 ↗
37. 10.1016/j.resconrec.2022.10630410.1016/j.resconrec.2022.106304 ↗
38. 10.1061/(ASCE)MT.1943-5533.000289810.1061/(ASCE)MT.1943-5533.0002898 ↗
39. 10.1016/j.conbuildmat.2020.12049110.1016/j.conbuildmat.2020.120491 ↗
40. 10.1016/j.resconrec.2020.10495310.1016/j.resconrec.2020.104953 ↗
41. Tennis P. D. Leming M. L. & Akers D. J. (2004). Pervious concrete pavements. Portland Cement Association Skokie Illinois and National Ready Mixed Concrete Association Silver Spring Maryland USA. http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.626.1739&rep=rep1&type=pdf
42. Terhell S.-L. Cai K. Chiu D. & Murphy J. (2015). Cost and benefit analysis of permeable pavements in water sustainability (p. 8). University of California Agriculture and Natural Resources: Davis CA. http://watermanagement.ucdavis.edu/files/5414/3891/2393/A03_Terhell_Cai_Chiu_Murphy_ESM121_FinalReport.pdf
43. 10.1520/JTE2020005210.1520/JTE20200052 ↗
44. 10.3141/2226-0210.3141/2226-02 ↗
45. 10.1061/(ASCE)TE.1943-5436.000032710.1061/(ASCE)TE.1943-5436.0000327 ↗
46. 10.1016/j.rser.2021.11117110.1016/j.rser.2021.111171 ↗
47. 10.1186/s43065-020-00003-010.1186/s43065-020-00003-0 ↗
48. Wanielista M. & Chopra M. (2007). Report 4 of 4: Performance assessment of a pervious concrete pavement used as a shoulder for an interstate rest area parking lot (p. 38). Stormwater Management Academy University of Central Florida Orlando FL. http://stormwater.ucf.edu/wp-content/uploads/2015/10/Final-Report-4-of-4-Shoulder-June-2007.pdf
49. Wanielista M. Chopra M. Spence J. & Ballock C. (2007). Hydraulic performance assessment of pervious concrete pavements for stormwater management credit (p. 74). Stormwater Management Academy University of Central Florida Orlando FL. https://rmc-foundation.org/wp-content/uploads/2017/07/PerformanceAssessmenFBD13pdf.pdf
50. 10.1016/j.trd.2020.10253210.1016/j.trd.2020.102532 ↗
51. 10.1016/j.conbuildmat.2020.12107410.1016/j.conbuildmat.2020.121074 ↗
52. 10.1016/j.conbuildmat.2016.07.13610.1016/j.conbuildmat.2016.07.136 ↗
53. 10.1016/j.ijtst.2018.12.00110.1016/j.ijtst.2018.12.001 ↗