journal article·2021-08-03

Treatment of weak subgrade materials with cement and hydraulic road binder (HRB)

Sheng-Lin Wang, Hassan Baaj

Publisher page

Abstract

Portland cement has been widely used to improve the engineering performance of pavement materials. On the other hand, hydraulic road binder (HRB) is now a frequent option in Europe for the treatment of road base, and subbase, and earthworks. HRB contains high amounts of supplementary cementitious materials (SCMs) and by-products. HRB has the potential of reducing the amount of cement clinker thereby making it more cost effective and environmentally friendly. Moreover, the HRB treated materials also have improved workability due to its slower setting and hardening. The primary objective of this study is to investigate the chemical and physical properties of organic clayey subgrade materials treated by different HRBs. The paper first introduced a brief background for the development of hydraulic binders and their current applications for soil stabilisation. Then, it presented the results of laboratory testing for cement- and HRB- treated subgrade soils. Test results indicated that all the three subgrade soils named Dresden, Blenheim, and Niagara were fine-grained soils with substantial silt and cvnlay particles and organic matters. Cement and HRBs significantly improved soil’s engineering properties. The improvement included the change of soil’s environment from acidic to alkaline and prevent development of organics, the significant improved strength, durability, and resilient modulus. In addition, HRB-treated subgrade soils had lower sulfate included than cement-treated one that could reduce the risk of sulfate-induced problems. Among all HRB-treated materials, with abundant curing, the subgrade soils treated with the HRB composed of GUL and slag (HRB-4LS) had the highest UCS values, followed by the soil treated with HRB-4LF (composed of GUL and fly ash), and HRB-3S (GU and GGBFS). It should be noted as well that the soil types played an important role in the treatment. Soils with high plasticity, high organic matters had lower strength and modulus than less plastic and organic soils. Lastly, the differences of the soils could be visualised from the environmental scanning electron microscopy (ESEM) images. This research contributed to a tentative treatment of weak subgrade soil with locally blended HRBs. The results also proposed a potential solution for the treatment of weak subgrade soils at the top of the natural subgrade.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Grouting, Rheology, and Soil Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, University of Waterloo, Waterloo, Canada

Funding

Natural Sciences and Engineering Research Council of Canada

References (43)

Show source-provided references
1. AASHTO Standard T307. 1999. Standard Method of Test for Determining the Resilient Modulus of Soils and Aggregate Materials. American Association of State Highway and Transportation Officials (AASHTO), Washington, DC.
2. 10.1080/14680629.2013.81735010.1080/14680629.2013.817350 ↗
3. Adaska, W. S. & Luhr, D. R. (2004, May). Control of reflective cracking in cement stabilized pavements. In Proceedings of 5th international RILEM conference on cracking in pavements (pp. 309–316).
4. Aggrawal, M. & Rohrer, J. (2016). Determination of chloride and sulfate in water and soil. Application Note 1113, Thermo Fisher Scientific, Sunnyvale, CA, USA. Retrieved from http://tools.thermofisher.com/content/sfs/brochures/AN-1113-IC-Chloride-Sulfate-Water-Soil-AN71389-EN.pdf
5. ASTM Standard C219. 2014. Standard Terminology Relating to Hydraulic Cement. ASTM International, West Conshohocken, PA, www.astm.org
6. ASTM Standard D1633. 2017. Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders. ASTM International, West Conshohocken, PA, www.astm.org
7. ASTM Standard D6276. 2006. Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization. ASTM International, West Conshohocken, PA, www.astm.org
8. BS EN 13282-1:2013 Hydraulic road binders. Rapid hardening hydraulic road binders. Composition, specifications and conformity criteria.
9. BS EN 13282-2:2015 Hydraulic road binders. Normal hardening hydraulic road binders. Composition, specifications and conformity criteria.
10. 10.1016/j.proeng.2015.06.12610.1016/j.proeng.2015.06.126 ↗
11. CAN/CSA-A3001-13. Cementitious materials used in concrete. Mississauga, Ontario, Canada.
12. Cement Association of Canada (CAC). (2016). Environmental Product Declaration (EPD)-General use (GU) and Portland-limestone (GUL) cements. Cement Association of Canada. Retrieved from www.stmaryscement.com/Documents/Canada/CAC%20EPD%20(GU,%20GUL).pdf).pdf
13. Ćwiąkała M. · Roads and Bridges-Drogi i Mosty · 2012 · 11 · 195
14. Das B. M. · 2016
15. George K. P. · Highway Research Record · 1973 · 442
16. Halsted, G. E. (2011). Cement-Modified Soil for Long Lasting Pavements. | tac-atc.ca. Presented at the Conference of Transportation Association of Canada, Edmonton, Alberta. Retrieved from http://conf.tac-atc.ca/english/annualconference/tac2011/docs/sm2/halsted.pdf
17. Halsted G. E. · 2008
18. Harris, P., Harvey, O., Puppala, A. J., Sebesta, S., Chikyala, S. R. & Saride, S. (2009). Mitigating the effects of organics in stabilized soils: Technical Report (No. FHWA/TX-09/0-5540-1). Texas. Dept. of Transportation. Retrieved from https://rosap.ntl.bts.gov/view/dot/38672
19. 10.1016/j.ijsbe.2013.05.00110.1016/j.ijsbe.2013.05.001 ↗
20. 10.1016/j.cemconcomp.2004.02.01910.1016/j.cemconcomp.2004.02.019 ↗
21. 10.1016/j.enggeo.2014.05.00610.1016/j.enggeo.2014.05.006 ↗
22. Little, D. N. & Nair, S. (2009). Recommended practice for stabilization of subgrade soils and base materials. Contractor's Final Task Report for NCHRP Project 20-07. Texas Transportation Institute, Texas A&M University, College Station, Texas.
23. 10.1016/j.conbuildmat.2019.07.31710.1016/j.conbuildmat.2019.07.317 ↗
24. 10.1061/(ASCE)0899-1561(2002)14:6(447)10.1061/(ASCE)0899-1561(2002)14:6(447) ↗
25. Portland Cement Association · 1992
26. Portland Cement Association (PCA). (2016). Preparing an environmental product declaration for Portland, blended hydraulic, masonry, mortar, and plastic (Stucco) cements. Portland Cement Association. Retrieved from http://www.stmaryscement.com/Documents/US/PCA%20EPD%20(PORTLAND).pdf
27. 10.3141/1652-2810.3141/1652-28 ↗
28. 10.1016/j.enggeo.2016.04.03210.1016/j.enggeo.2016.04.032 ↗
29. 10.1061/(ASCE)1090-0241(1999)125:5(364)10.1061/(ASCE)1090-0241(1999)125:5(364) ↗
30. 10.1080/14680629.2013.77930310.1080/14680629.2013.779303 ↗
31. Savannah Cement. (2014). Savannah cement, develops a special product to support ongoing roads infrastructure development; [online]. Retrieved from http://www.savannahcement.com/wp-content/uploads/2013/01/Savannah-cement-HRB-media-release-30th-July-20141.pdf
32. 10.1016/j.cemconres.2015.05.02510.1016/j.cemconres.2015.05.025 ↗
33. 10.1016/j.clay.2012.01.00710.1016/j.clay.2012.01.007 ↗
34. Service d'études sur les transports, les routes et leurs aménagements (SÉTRA). (2008). Treatment of soils with lime and/or hydraulic binders-application to the construction of pavement base layers. Technical Guide published by SÉTRA and carried out by the French Road Engineering Committee (CFTR), 2007, translated in 2008.
35. 10.1061/(ASCE)0899-1561(2009)21:12(749)10.1061/(ASCE)0899-1561(2009)21:12(749) ↗
36. Standards
37. 10.1061/(ASCE)GT.1943-5606.000050210.1061/(ASCE)GT.1943-5606.0000502 ↗
38. Terzaghi K. · 1996
39. 10.1139/t02-00210.1139/t02-002 ↗
40. United Kingdom Quality Ash Association (UKQA). (2010). Embodied CO2 of UK cement, additions and cementitious material. Technical data sheet 8.3, MPA; UK quality Ash association; [online]. Retrieved from http://cement.mineralproducts.org/documents/Factsheet_18.pdf
41. Wang, S., Baaj, H., Zupko, S. & Smith, T. (2018). Field and lab assessment for cement-stabilized subgrade in Chatham, Ontario | tac-atc.ca. Presented at the Conference of Transportation Association of Canada, Saskatoon, Saskatchewan. Retrieved from https://www.tac-atc.ca/en/conference/papers/field-and-lab-assessment-cement-stabilized-subgrade-chatham-ontario
42. 10.1139/cjce-2016-005210.1139/cjce-2016-0052 ↗
43. 10.1016/j.enggeo.2008.07.01110.1016/j.enggeo.2008.07.011 ↗