journal article·2022-04-03

Mechanical and fracture properties of alkali activated concrete containing different pozzolanic materials

H. Rooholamini, A. Bayat, F. Kazemian

Publisher page

Abstract

Environmental considerations have caused the alkali-activated slag (AAS) cements to emerge as a promising sustainable substitute for the ordinary Portland cement (OPC). This study is aimed to the results of some comprehensive experimental researches performed on the AAS concrete with different types of partial replacement of binder including fly ash, silica fume, and red mud in terms of mechanical and different-mode fracture properties. According to the results, all AAS concrete mixes made with mineral admixtures (except 70% fly ash) exhibited mechanical strength comparable to that of the OPC concrete, and results of the fracture toughness in pure mode I (tensile opening), mode II (shear in-plane), and results of the fracture toughness in pure mode I (tensile opening), mode II (shear in-plane) and mode III (shear out-plane) showed that the trend of tensile and shear performance of concrete mixes are nearly similar. Based on the results of pull-off adhesion test and image processing, the high paste strength in different AAS concrete mixes caused a better aggregates-paste bonding strength.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, University of Hormozgan, Hormozgan, Iran

Department of Civil Engineering, Khomein Branch, Islamic Azad University, Khomein, Iran

Civil and Environmental Engineering Department, Tarbiat Modares University, Tehran, Iran

References (76)

Show source-provided references
1. 10.1016/j.engfracmech.2012.09.02110.1016/j.engfracmech.2012.09.021 ↗
2. 10.1016/j.matdes.2015.08.03310.1016/j.matdes.2015.08.033 ↗
3. Allwood, J. M., Cullen, J. M. & Milford, R. L. (2010). Options for achieving a 50% cut in industrial carbon emissions by 2050. ACS Publications.10.1021/es902909k ↗
4. 10.1111/j.1600-0889.2011.00530.x10.1111/j.1600-0889.2011.00530.x ↗
5. 10.1016/j.enpol.2013.02.04210.1016/j.enpol.2013.02.042 ↗
6. ASTM C143 · 2010
7. ASTM C39 · 2018
8. ASTM C78 · 2018
9. ASTM C1240-20. (2020). Standard specification for silica fume used in cementitious mixtures, ASTM International.
10. ASTM C989. (2018). Standard Specification for slag cement for use in concrete and mortars, ASTM International.
11. ASTM D4541-17. (2017). Standard test method for pull-off strength of coatings using portable adhesion testers, ASTM International.
12. ASTM C1583-04. (2004). Standard test method for tensile strength of concrete surfaces and the bond strength or tensile strength of concrete repair and overlay materials by direct tension (pull-off method), ASTM International.
13. ASTM C311. (2000). Standard test methods for sampling and testing fly ash or natural Pozzolans for use as a mineral admixture in Portland-Cement Concrete. ASTM International.
14. Avami A. · International Journal of Energy · 2007 · 1 · 65
15. 10.1016/j.engfracmech.2010.10.00110.1016/j.engfracmech.2010.10.001 ↗
16. 10.1016/j.conbuildmat.2013.02.00510.1016/j.conbuildmat.2013.02.005 ↗
17. 10.1016/S0008-8846(98)00170-710.1016/S0008-8846(98)00170-7 ↗
18. 10.1016/S0008-8846(01)00659-710.1016/S0008-8846(01)00659-7 ↗
19. 10.1016/S0008-8846(03)00125-X10.1016/S0008-8846(03)00125-X ↗
20. Bayat A. · Road Materials and Pavement Design · 2018 · 1
21. 10.1016/j.conbuildmat.2018.02.10510.1016/j.conbuildmat.2018.02.105 ↗
22. 10.1007/BF0248175510.1007/BF02481755 ↗
23. 10.1016/j.cemconres.2010.08.01710.1016/j.cemconres.2010.08.017 ↗
24. 10.1007/s10853-011-5490-z10.1007/s10853-011-5490-z ↗
25. 10.1016/j.ijadhadh.2005.01.00210.1016/j.ijadhadh.2005.01.002 ↗
26. 10.1016/S0008-8846(00)00254-410.1016/S0008-8846(00)00254-4 ↗
27. 10.1016/j.jclepro.2016.05.03610.1016/j.jclepro.2016.05.036 ↗
28. 10.1016/j.conbuildmat.2012.04.00510.1016/j.conbuildmat.2012.04.005 ↗
29. 10.1016/j.conbuildmat.2012.11.00310.1016/j.conbuildmat.2012.11.003 ↗
30. 10.1007/BF0115755510.1007/BF01157555 ↗
31. 10.1016/S0008-8846(98)00237-310.1016/S0008-8846(98)00237-3 ↗
32. 10.1016/j.matdes.2014.05.00110.1016/j.matdes.2014.05.001 ↗
33. 10.1016/j.conbuildmat.2018.09.13810.1016/j.conbuildmat.2018.09.138 ↗
34. 10.1016/j.conbuildmat.2007.10.01110.1016/j.conbuildmat.2007.10.011 ↗
35. 10.1016/j.engfracmech.2017.05.01110.1016/j.engfracmech.2017.05.011 ↗
36. 10.1016/j.conbuildmat.2018.11.08310.1016/j.conbuildmat.2018.11.083 ↗
37. 10.1016/S0008-8846(99)00154-410.1016/S0008-8846(99)00154-4 ↗
38. 10.1680/adcr.2003.15.3.12910.1680/adcr.2003.15.3.129 ↗
39. Hu, X., Shi, C., Shi, Z. & Zhang, L. (2019). Compressive strength, pore structure and chloride transport properties of alkali-activated slag/fly ash mortars. Cement and Concrete Composites.10.1016/j.cemconcomp.2019.01.010 ↗
40. 10.1016/j.conbuildmat.2013.07.10610.1016/j.conbuildmat.2013.07.106 ↗
41. 10.1016/j.cemconcomp.2013.09.00610.1016/j.cemconcomp.2013.09.006 ↗
42. 10.1061/(ASCE)IS.1943-555X.000021110.1061/(ASCE)IS.1943-555X.0000211 ↗
43. 10.1016/j.conbuildmat.2016.12.12310.1016/j.conbuildmat.2016.12.123 ↗
44. 10.1016/j.conbuildmat.2019.03.17910.1016/j.conbuildmat.2019.03.179 ↗
45. 10.1016/S0008-8846(01)00717-710.1016/S0008-8846(01)00717-7 ↗
46. 10.1016/0013-7944(93)90030-V10.1016/0013-7944(93)90030-V ↗
47. Lim I. · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · 1994
48. 10.1016/j.conbuildmat.2018.11.23010.1016/j.conbuildmat.2018.11.230 ↗
49. 10.1016/j.conbuildmat.2018.09.09910.1016/j.conbuildmat.2018.09.099 ↗
50. 10.1016/j.conbuildmat.2014.05.08010.1016/j.conbuildmat.2014.05.080 ↗
51. Palacios M. · ACI Materials Journal · 2008 · 105 · 140
52. 10.1016/S0008-8846(01)00683-410.1016/S0008-8846(01)00683-4 ↗
53. 10.1016/S0008-8846(03)00093-010.1016/S0008-8846(03)00093-0 ↗
54. 10.1002/ep.1242110.1002/ep.12421 ↗
55. Pu X. C. · Chongqing Institute of Architecture and Engineering · 1988 · 6
56. 10.1016/j.cemconcomp.2014.07.01210.1016/j.cemconcomp.2014.07.012 ↗
57. 10.1016/j.conbuildmat.2018.02.01810.1016/j.conbuildmat.2018.02.018 ↗
58. 10.1016/j.conbuildmat.2013.04.01110.1016/j.conbuildmat.2013.04.011 ↗
59. 10.1016/j.matdes.2013.07.07410.1016/j.matdes.2013.07.074 ↗
60. 10.1016/j.conbuildmat.2012.10.01410.1016/j.conbuildmat.2012.10.014 ↗
61. 10.1016/j.conbuildmat.2018.07.17710.1016/j.conbuildmat.2018.07.177 ↗
62. 10.1080/10298436.2017.132141410.1080/10298436.2017.1321414 ↗
63. 10.1016/j.conbuildmat.2019.03.22310.1016/j.conbuildmat.2019.03.223 ↗
64. 10.1016/j.conbuildmat.2016.12.07210.1016/j.conbuildmat.2016.12.072 ↗
65. 10.1016/S0008-8846(97)00191-910.1016/S0008-8846(97)00191-9 ↗
66. 10.1016/j.conbuildmat.2018.04.20710.1016/j.conbuildmat.2018.04.207 ↗
67. 10.1016/j.matdes.2012.08.00510.1016/j.matdes.2012.08.005 ↗
68. 10.1016/j.bsecv.2015.03.00410.1016/j.bsecv.2015.03.004 ↗
69. 10.1016/j.fuel.2014.05.01810.1016/j.fuel.2014.05.018 ↗
70. Yang, K.H., Song, J.K., Lee, K.S. & Ashour, A. F. (2009). Flow and compressive strength of alkali-activated mortars.
71. 10.1016/j.cemconres.2018.04.00810.1016/j.cemconres.2018.04.008 ↗
72. 10.1680/macr.2005.57.1.3310.1680/macr.2005.57.1.33 ↗
73. 10.1680/macr.9.0011010.1680/macr.9.00110 ↗
74. 10.1016/j.cemconcomp.2005.07.00410.1016/j.cemconcomp.2005.07.004 ↗
75. 10.1016/j.conbuildmat.2006.07.00210.1016/j.conbuildmat.2006.07.002 ↗
76. Zongjin L. · 2011