journal article·2021-04-03

Influence of the replacement of fine copper slag aggregate on physical properties and abrasion resistance of pervious concrete

Ali Rezaei Lori, Arash Bayat, Amirmokhtar Azimi

Publisher page

Abstract

Copper slag (CS), the metallurgic slag of the copper industry, has demonstrated very promising potential as an aggregate for application in the concrete industry. The present study evaluated the hydraulic conductivity, various strengths, impact and abrasion resistance of the pervious concrete (PC) when a natural fine aggregate of dolomite was replaced by the CS at levels of 0%, 20%, 40%, 60%, 80%, and 100% by the volume of the natural fine aggregate. The optimum content of CS leading to the highest mechanical properties was 100%. At this percentage, compressive, flexural, and split tensile strength for the samples at 28-days curing ages represented 31%, 17%, and 10% increase compared to the control sample. Besides, at this percent, the surface abrasion resistance and weight loss due to impact and ravelling were 23.6% and 21%, respectively, lower than neat dolomite, obtained by a wide wheel abrasion test and a Los Angeles abrasion test. The higher mechanical properties of PC was dependent to higher mechanical properties of deployed aggregate and a denser transition zone s for the CS compared to the dolomite, measured by the aggregate crushing test and the SEM observation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Tarbiat Modares University, Tehran, Iran

Department of Civil Engineering, Khomein Branch, Islamic Azad University, Khomein, Iran

Department of Civil and Environmental Engineering, Vali-e-asr University, Rafsanjan, Iran

References (56)

Show source-provided references
1. ACI Committee 522 · 2010
2. 10.1016/j.cemconcomp.2009.04.00710.1016/j.cemconcomp.2009.04.007 ↗
3. 10.1016/j.conbuildmat.2008.12.01310.1016/j.conbuildmat.2008.12.013 ↗
4. 10.1016/j.jhazmat.2008.02.05610.1016/j.jhazmat.2008.02.056 ↗
5. 10.1080/14680629.2011.65183410.1080/14680629.2011.651834 ↗
6. ASTM C127-15 · 2015
7. ASTM C1688 / C1688M-14a · 2014
8. ASTM C1747/C1747M-13 · 2013
9. ASTM C1754 / C1754M-12 · 2012
10. ASTM C192 · 2018
11. ASTM C29/C29M-17a · 2017
12. ASTM C33/C33M · 2018
13. ASTM C496 / C496M-17 · 2017
14. ASTM C535-16 · 2016
15. ASTM C78/C78M-18 · 2018
16. 10.1177/0734242X0935226010.1177/0734242X09352260 ↗
17. BS 812-110 · 1999
18. BS 812-112 · 1999
19. BS EN 12390-3 · 2009
20. BS EN 1338 · 2003
21. 10.1617/s11527-016-0858-910.1617/s11527-016-0858-9 ↗
22. 10.1080/14680629.2018.146450010.1080/14680629.2018.1464500 ↗
23. 10.1016/j.conbuildmat.2006.12.00710.1016/j.conbuildmat.2006.12.007 ↗
24. Das B. M. · Transportation Research Record · 1983 · 941 · 1
25. 10.1016/B978-0-08-100987-1.00001-910.1016/B978-0-08-100987-1.00001-9 ↗
26. 10.1080/14680629.2016.125195710.1080/14680629.2016.1251957 ↗
27. 10.1016/j.conbuildmat.2014.07.00110.1016/j.conbuildmat.2014.07.001 ↗
28. 10.1016/S0921-3449(02)00171-410.1016/S0921-3449(02)00171-4 ↗
29. 10.1617/s11527-014-0517-y10.1617/s11527-014-0517-y ↗
30. Guo Y. · Arid Environmental Monitoring · 2003 · 17 · 177
31. Holman K. R. · 2013
32. 10.1016/j.conbuildmat.2016.03.18110.1016/j.conbuildmat.2016.03.181 ↗
33. 10.1016/j.conbuildmat.2017.04.07210.1016/j.conbuildmat.2017.04.072 ↗
34. 10.1016/j.jclepro.2017.10.15910.1016/j.jclepro.2017.10.159 ↗
35. 10.1016/j.conbuildmat.2008.12.00510.1016/j.conbuildmat.2008.12.005 ↗
36. 10.1016/S0956-053X(99)00141-510.1016/S0956-053X(99)00141-5 ↗
37. 10.1007/s12649-016-9819-310.1007/s12649-016-9819-3 ↗
38. 10.1016/j.conbuildmat.2016.12.02410.1016/j.conbuildmat.2016.12.024 ↗
39. 10.1016/j.jclepro.2015.06.02610.1016/j.jclepro.2015.06.026 ↗
40. Moura W. · Special Publication · 1999 · 186 · 81
41. 10.1080/14680629.2017.142156810.1080/14680629.2017.1421568 ↗
42. 10.1016/j.conbuildmat.2018.02.01010.1016/j.conbuildmat.2018.02.010 ↗
43. Pazhani K. · Engineering Today · 2010 · 12 · 33
44. 10.1016/j.conbuildmat.2012.12.04610.1016/j.conbuildmat.2012.12.046 ↗
45. 10.1016/j.resconrec.2007.08.00110.1016/j.resconrec.2007.08.001 ↗
46. 10.1016/j.conbuildmat.2017.08.07410.1016/j.conbuildmat.2017.08.074 ↗
47. 10.1016/j.jclepro.2017.03.03110.1016/j.jclepro.2017.03.031 ↗
48. 10.1016/j.jclepro.2017.10.02910.1016/j.jclepro.2017.10.029 ↗
49. 10.1016/j.resconrec.2008.06.00810.1016/j.resconrec.2008.06.008 ↗
50. Shirgir B. · Modares Civil Engineering Journal · 2011 · 11 · 49
51. 10.3141/2240-0510.3141/2240-05 ↗
52. Tennis P. D. · 2004
53. 10.1016/j.matdes.2009.12.03710.1016/j.matdes.2009.12.037 ↗
54. 10.1016/j.jclepro.2018.01.20510.1016/j.jclepro.2018.01.205 ↗
55. 10.1016/j.conbuildmat.2016.02.06010.1016/j.conbuildmat.2016.02.060 ↗
56. 10.1016/j.conbuildmat.2016.12.20310.1016/j.conbuildmat.2016.12.203 ↗