journal article·2020-08-17

Performance evaluation of bio-based asphalt and asphalt mixture and effects of physical and chemical modification

Zejiao Dong, Tao Zhou, Hai Luan, Hao Wang, Ning Xie, Gui-qing Xiao

Publisher page

Abstract

Adding bio-binder (BB) into petroleum-based asphalt (BA) to produce the sustainable pavement material of bio-based asphalt (BBA), and replace the BA partially or even fully could reduce the dependence of pavement engineering on fossil fuels. This study aims to investigate the effects of adding single-source BB from corn on asphalt binder and asphalt mixture performance. Rheological properties measured from Rotational Viscometer (RV), Dynamic Shear Rheometer (DSR) and Bending Beam Rheometer (BBR) showed that addition of BB increased the viscosity while decreased the temperature susceptibility of asphalt binder, the BBA became stiffer at high temperatures and more brittle at low temperatures. Pavement performance tests conducted at mixture level showed that adding BB is capable of improving rutting resistance while sacrificing low-temperature cracking resistance slightly, but moisture damage resistance decreased evidently. Therefore, chemical characterisation of BB and BA was conducted using Elemental Analysis, Gas Chromatography-Mass Spectroscopy (GC-MS), Fourier-Transform Infrared Spectroscopy (FTIR) and Saturates, Aromatics, Resins and Asphaltenes (SARA) Fractions Analysis was employed to investigate the performance variation mechanism due to the addition of BB. The results proved that a certain number of light and soluble components existed in BB. After that, physical and chemical modifications with the modifiers of Styrene–Butadiene–Styrene (SBS) block copolymer and o-Phthalic anhydride, respectively, were adopted to improve the performance of BBA. Mixture performance tests showed that physical method improved high- and low-temperature performance obviously while had no effect on moisture damage resistance. On the other hand, the chemical approach enhanced moisture damage resistance of mixture visibly while not affecting other performance criteria. The study findings emphasised that utilising BBA proposed to partially replace BA is potential and feasible with appropriate modification.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Natural Fiber Reinforced Composites · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, Heilongjiang, People's Republic of China

Department of Road Engineering, Jilin Provincial Transportation Planning and Design Institute, Changchun 130021, Jilin, People's Republic of China

Department of Civil and Environmental Engineering, Rutgers, The State University of New Jersey, Piscataway, NJ 08854, USA

School of Material Science and Engineering, University of Jinan, Jinan 250022, Shandong, People's Republic of China

Department of Road Engineering, Tianjin Municipal Engineering Design and Research Institute, Tianjin 300457, People's Republic of China

Funding

National Natural Science Foundation of China · Science and Technology Project of DOT of Jilin Province

References (39)

Show source-provided references
1. AASHTO. (2003). Standard method of test for resistance of compacted hot mix asphalt (HMA) to moisture-induced damage. AASHTO T283. Washington, DC: American Association of State Highway and Transportation Officials.
2. 10.1016/j.fuel.2015.07.03610.1016/j.fuel.2015.07.036 ↗
3. 10.1016/S0016-2361(03)00146-710.1016/S0016-2361(03)00146-7 ↗
4. ASTM. (2009). Standard test method for separation of asphalt into four fractions. ASTM D4124. West Conshohocken, PA: ASTM International.
5. ASTM. (2013). Standard test method for penetration of bituminous materials. ASTM D5. West Conshohocken, PA: ASTM International.
6. ASTM. (2014). Standard test method for softening point of bitumen (ring-and-ball apparatus). ASTM D36. West Conshohocken, PA: ASTM International.
7. ASTM. (2015). Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM D4402. West Conshohocken, PA: ASTM International.
8. ASTM. (2017). Standard test method for ductility of asphalt materials. ASTM D113. West Conshohocken, PA: ASTM International.
9. Buss A. · Journal of Materials in Civil Engineering · 2016 · 28 · 0401515310.1061/(ASCE)MT.1943-5533.0001445 ↗
10. 10.1016/j.conbuildmat.2014.05.03310.1016/j.conbuildmat.2014.05.033 ↗
11. 10.3141/2505-1610.3141/2505-16 ↗
12. 10.1061/(ASCE)MT.1943-5533.000224710.1061/(ASCE)MT.1943-5533.0002247 ↗
13. 10.1061/(ASCE)MT.1943-5533.000023710.1061/(ASCE)MT.1943-5533.0000237 ↗
14. 10.1016/j.rser.2006.07.01410.1016/j.rser.2006.07.014 ↗
15. 10.1080/10298436.2016.117556310.1080/10298436.2016.1175563 ↗
16. 10.1061/9780784480137.06310.1061/9780784480137.063 ↗
17. 10.1016/j.conbuildmat.2016.03.08610.1016/j.conbuildmat.2016.03.086 ↗
18. 10.3141/2574-0310.3141/2574-03 ↗
19. Ministry of Transport of the People’s Republic of China. (2004). Technical specifications for construction of highway asphalt pavements. JTG F40-2004. Beijing: China Communications Press.
20. Ministry of Transport of the People’s Republic of China. (2011). Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20-2011. Beijing: China Communications Press.
21. 10.1021/ef050239710.1021/ef0502397 ↗
22. 10.1021/acs.jpcc.6b0500410.1021/acs.jpcc.6b05004 ↗
23. Mullen C. A. · Energy & Fuels · 2008 · 22 · 210410.1021/ef700776w ↗
24. 10.1016/j.nbt.2015.02.00810.1016/j.nbt.2015.02.008 ↗
25. 10.1016/j.fuel.2016.07.09410.1016/j.fuel.2016.07.094 ↗
26. Rocha E. P. A. · Energy & Fuels · 2015 · 29 · 797510.1021/acs.energyfuels.5b01945 ↗
27. 10.1016/j.fuel.2017.04.06910.1016/j.fuel.2017.04.069 ↗
28. 10.1080/14680629.2015.109681910.1080/14680629.2015.1096819 ↗
29. 10.1016/j.fuel.2009.08.04010.1016/j.fuel.2009.08.040 ↗
30. 10.1061/(ASCE)MT.1943-5533.000071310.1061/(ASCE)MT.1943-5533.0000713 ↗
31. 10.1016/j.resconrec.2006.11.00510.1016/j.resconrec.2006.11.005 ↗
32. 10.1016/j.jclepro.2016.11.10010.1016/j.jclepro.2016.11.100 ↗
33. 10.1016/j.conbuildmat.2016.03.10010.1016/j.conbuildmat.2016.03.100 ↗
34. 10.1016/j.conbuildmat.2013.11.01710.1016/j.conbuildmat.2013.11.017 ↗
35. 10.1061/(ASCE)MT.1943-5533.000111710.1061/(ASCE)MT.1943-5533.0001117 ↗
36. 10.1061/(ASCE)MT.1943-5533.000029510.1061/(ASCE)MT.1943-5533.0000295 ↗
37. Zhang L. · Construction and Building Materials · 2015 · 86 · 9510.1016/j.conbuildmat.2015.03.106 ↗
38. 10.3390/ma1005050810.3390/ma10050508 ↗
39. 10.1061/(ASCE)MT.1943-5533.000223710.1061/(ASCE)MT.1943-5533.0002237 ↗