Statistical damage constitutive model for the two-component foaming polymer grouting material
Source abstract
Abstract
Abstract Two-component foaming polymer (TFPU) grouting material is increasingly used in civil engineering. Its compressive strength is key to achieving the desired enhancing effect. The constitutive model of TFPU grouting material is a theoretical basis to evaluate the strength performance, which, however, is not fully understood. Here the uniaxial compression experiment of TFPU samples of different densities (0.11–0.53 g·cm−3) was conducted. Based on the stress–strain curves, the damage evolution equation of each sample was obtained by function fitting, followed by the establishment of statistical damage constitutive model. The model was simplified to a universal function with density as the argument. Results show that the stress–strain curves contain the initial compression stage, linear elastic stage, yield stage, yield plateau stage, and strain hardening stage regardless of the varied density. The variation laws of the damage with strain conform to the form of first-order decay exponential function. The theoretical stress–strain curves are in good agreement with the experimental ones, indicating that the statistical damage constitutive model can well reflect the mechanical behavior of TFPU grouting material. With this constitutive model, the mechanical properties of TFPU grouting material can be obtained according to the density alone, which is more convenient for practical engineering applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Water Conservancy Engineering, Zhengzhou University , Zhengzhou 450001 , China
National Local Joint Engineering Laboratory of Major Infrastructure Testing and Rehabilitation Technology , Zhengzhou 450001 , China
Collaborative Innovation Center of Water Conservancy and Transportation Infrastructure Safety , Henan Province , Zhengzhou 450001 , China
Southern Institute of Infrastructure Testing and Rehabilitation Technology , Huizhou 512200 , China
References (59)
Show source-provided references
1. Du, X., H. Fang, S. Wang, B. Xue, and F. Wang. Experimental and practical investigation of the sealing efficiency of cement grouting in tortuous fractures with flowing water. Tunnelling and Underground Space Technology, Vol. 108, 2021, id. 03693.10.1016/j.tust.2020.103693 ↗
2. Du, M. R., H. W. Jing, W. H. Duan, G. S. Han, and S. J. Chen. Methylcellulose stabilized multi-walled carbon nanotubes dispersion for sustainable cement composites. Construction and Building Materials, Vol. 146, 2017, pp. 76–85.10.1016/j.conbuildmat.2017.04.029 ↗
3. Du, M. R., S. J. Chen, W. H. Duan, W. Q. Chen, and H. W. Jing. Role of multi-walled carbon nanotubes as shear reinforcing nano-pins in quasi-brittle matrices. ACS Applied Nano Materials, Vol. 1, No. 4, 2018, pp. 1731–1740.10.1021/acsanm.8b00162 ↗
4. Fang, H. Y., B. Li, F. M. Wang, Y. K. Wang, and C. Cui. The mechanical behaviour of drainage pipeline under traffic load before and after polymer grouting trenchless repairing. Tunnelling and Underground Space Technology, Vol. 74, 2018, pp. 185–194.10.1016/j.tust.2018.01.018 ↗
5. Saleh, S., N. Z. M. Yunus, K. Ahmad, and N. Ali. Improving the strength of weak soil using polyurethane grouts: A review. Construction and Building Materials, Vol. 202, 2019, pp. 738–752.10.1016/j.conbuildmat.2019.01.048 ↗
6. Guo, C., C. Cui, and F. Wang. Case study on quick treatment of voids under airport pavement by polymer grouting. Journal of Materials in Civil Engineering, Vol. 32, No. 7, 2020, id. 05020006.10.1061/(ASCE)MT.1943-5533.0003228 ↗
7. Li, M., M. Du, F. Wang, B. Xue, C. Zhang, and H. Fang. Study on the mechanical properties of polyurethane (PU) grouting material of different geometric sizes under uniaxial compression. Construction and Building Materials, Vol. 259, 2020, id. 119797.10.1016/j.conbuildmat.2020.119797 ↗
8. Wang, Z., M. Du, H. Fang, C. Zhang, M. Li, and M. Shi. Influence of different corrosion environments on mechanical properties of a roadbed rehabilitation polyurethane grouting material under uniaxial compression. Construction and Building Materials, Vol. 301, 2021, id. 124092.10.1016/j.conbuildmat.2021.124092 ↗
9. Wang, F., M. Shi, H. Li, and Y. Zhong. Experimental study on the anti-permeability properties of polymer grouting materials. Advanced Materials Research, Vol. 284–286, 2011, pp. 1952–1955.10.4028/www.scientific.net/AMR.284-286.1952 ↗
10. Guo, C., X. Chu, and F. Wang. The feasibility of non-water reaction polymer grouting technology application in seepage prevention for tailings reservoirs. Water Supply, Vol. 18, No. 1, 2017, pp. 203–213.10.2166/ws.2017.096 ↗
11. Li, B., F. Wang, H. Fang, K. Yang, and Y. Ji. Experimental and numerical study on polymer grouting pretreatment technology in void and corroded concrete pipes. Tunnelling and Underground Space Technology, Vol. 3, 2021, id. 103842.10.1016/j.tust.2021.103842 ↗
12. Liang, J., S. Ma, and X. Du. Diffusion model of parallel plate crack grouting based on foaming expansion characteristics of polymer slurry. Mathematics, Vol. 9, No. 22, 2021, id. 9222907.10.3390/math9222907 ↗
13. Zhang, J. and Y. Sun. Experimental and mechanism study of a polymer foaming grouting material for reinforcing broken coal mass. Ksce Journal of Civil Engineering, Vol. 23, No. 1, 2019, pp. 346–355.10.1007/s12205-018-0780-5 ↗
14. Hao, M., X. Li, Y. Zhong, B. Zhang, and F. Wang. Experimental study of polyurethane grout diffusion in a water-bearing fracture. Journal of Materials in Civil Engineering, Vol. 33, No. 3, 2021, id. 04020485.10.1061/(ASCE)MT.1943-5533.0003612 ↗
15. Hao, M., F. Wang, X. Li, B. Zhang, and Y. Zhong. Numerical and experimental studies of diffusion law of grouting with expansible polymer. Journal of Materials in Civil Engineering, Vol. 30, No. 2, 2018, id. 04017290.10.1061/(ASCE)MT.1943-5533.0002130 ↗
16. Guo, C. C. and F. M. Wang. Mechanism study on the construction of ultra-thin antiseepage wall by polymer injection. Journal of Materials in Civil Engineering, Vol. 24, No. 9, 2012, pp. 1183–1192.10.1061/(ASCE)MT.1943-5533.0000497 ↗
17. Bian, X. C., Z. Cheng, F. M. Wang, J. Q. Jiang, and Y. M. Chen. Experimental study on dynamic performance and long-term durability of high-speed railway subgrade rehabilitated by polymer injection technology. Chinese Journal of Geotechnical Engineering, Vol. 36, No. 3, 2013, pp. 562–568.
18. Moraes, M. T. D., F. B. D. Luz, H. Debiasi, J. C. Franchini, and V. R. D. Silva. Soil load support capacity increases with time without soil mobilization as a result of age-hardening phenomenon. Soil and Tillage Research, Vol. 186, 2019, pp. 128–134.10.1016/j.still.2018.09.009 ↗
19. Gao, X., W. Huang, Y. Wei, and Y. H. Zhong. Experiment and modeling for compressive strength of poyurethane grout materials. Acta Materiae Compositae Sinica, Vol. 34, No. 2, 2017, pp. 438–445.
20. Gao, X., Y. Wei, F. Wang, and Y. Zhong. Fatigue resistant and microstructure evolution of polyurethane grout materials under uniaxial compression. Acta Materiae Compositae Sinica, Vol. 34, No. 3, 2017, pp. 550–556.
21. Lu, Z., T. Chang, and R. Xie. The compressed properties of polyurethane rigid (PUR) foam. Chinese Journal of Material Research, Vol. 5, 1994, pp. 452–456.
22. Kim, T. R., J. K. Shin, T. S. Goh, H. S. Kim, J. S. Lee, and C. S. Lee. Modeling of elasto-viscoplastic behavior for polyurethane foam under various strain rates and temperatures. Composite Structures, Vol. 180, 2017, pp. 685–695.10.1016/j.compstruct.2017.08.032 ↗
23. Buzzi, O., S. Fityus, Y. Sasaki, and S. Sloan. Structure and properties of expanding polyurethane foam in the context of foundation remediation in expansive soil. Mechanics of Materials, Vol. 40, No. 12, 2008, pp. 1012–1021.10.1016/j.mechmat.2008.07.002 ↗
24. Niedziela, D., I. E. Ireka, and K. Steiner. Computational analysis of nonuniform expansion in polyurethane foams. Polymers, Vol. 11, No. 1, 2019, id. 11010100.10.3390/polym11010100 ↗
25. Gibson, L. J., and M. F. Ashby. Cellular solids: structure and properties, Cambridge University Press, Cambridge, 1997.10.1017/CBO9781139878326 ↗
26. Srivastava, V., and R. Srivastava. On the polymeric foams: modeling and properties. Journal of Materials Science, Vol. 49, No. 7, 2014, pp. 2681–2692.10.1007/s10853-013-7974-5 ↗
27. Kontou, E., G. Spathis, and V. Kefalas. Statistical model for the compressive response of anisotropic polymeric and metallic foams. Journal of Materials Science, Vol. 47, No. 13, 2012, pp. 5326–5332.10.1007/s10853-012-6419-x ↗
28. Safari, K. H., J. Zamani, R. M. Guedes, and F. J. Ferreira. The effect of heat developed during high strain rate deformation on the constitutive modeling of amorphous polymers. Mechanics of Time-Dependent Materials, Vol. 20, No. 1, 2016, pp. 45–64.10.1007/s11043-015-9283-7 ↗
29. Avalle, M., G. Belingardi, and A. Ibba. Mechanical models of cellular solids: Parameters identification from experimental tests. International Journal of Impact Engineering, Vol. 34, No. 1, 2007, pp. 3–27.10.1016/j.ijimpeng.2006.06.012 ↗
30. Akio, Y., H. Keita, K. Hiroshi, and C. Xi. Characterization of the compressive deformation behavior with strain rate effect of low-density polymeric foams. Polymer Testing, Vol. 50, 2016, pp. 1–8.10.1016/j.polymertesting.2015.11.021 ↗
31. Huang, S., Q. Liu, A. Cheng, and Y. Liu. A statistical damage constitutive model under freeze-thaw and loading for rock and its engineering application. Cold Regions Science and Technology, Vol. 145, 2018, pp. 142–150.10.1016/j.coldregions.2017.10.015 ↗
32. Xiang, L., W. G. Cao, and Y. H. Su. A statistical damage constitutive model for softening behavior of rocks. Engineering Geology, Vol. 143–144, No. 8, 2012, pp. 1–17.10.1016/j.enggeo.2012.05.005 ↗
33. Yu, T. Statistical damage constitutive model of quasi-brittle materials. Journal of Aerospace Engineering, Vol. 22, No. 1, 2009, pp. 95–100.10.1061/(ASCE)0893-1321(2009)22:1(95) ↗
34. Xin, Y., N. Liang, X. Liu, and Z. Zhong. A study of test and statistical damage constitutive model of multi-size polypropylene fiber concrete under impact load. International Journal of Damage Mechanics, Vol. 28, No. 6, 2018, id. 105678951880522.10.1177/1056789518805220 ↗
35. Chen, K., M. Tang, and Z. Guo. Comparative study on three-dimensional conventional and modified statistical damage constitutive models. Multiscale and Multidisciplinary Modeling, Experiments and Design, Vol. 2, No. 4, 2019, pp. 259–267.10.1007/s41939-019-00052-3 ↗
36. Li, X., K. Peng, J. Peng, and D. Hou. Effect of thermal damage on mechanical behavior of a fine-grained sandstone. Arabian Journal of Geosciences, Vol. 14, No. 13, 2021, id. 1212.10.1007/s12517-021-07607-0 ↗
37. Cao, X. and J. Li. A shear damage model of the interface between soil and sulfate-corroded concrete. Construction and Building Materials, Vol. 293, No. 6, 2021, id. 123450.10.1016/j.conbuildmat.2021.123450 ↗
38. Wang, F. M., C. C. Guo, and Y. Gao. Formation of a polymer thin wall using the level set method. International Journal of Geomechanics, Vol. 14, No. 5, 2014, id. 04014021.10.1061/(ASCE)GM.1943-5622.0000363 ↗
39. Li, X. and M. C. Soteriou. High fidelity simulation and analysis of liquid jet atomization in a gaseous crossflow at intermediate Weber numbers. Physics of Fluids, Vol. 28, No. 8, 2016, id. 082101.10.1063/1.4959290 ↗
40. Prakash, S. R., S. S. Jain, J. A. Lovett, B. N. Raghunandan, R. V. Ravikrishna, and G. Tomar. Direct numerical simulations of atomization of a liquid jet in a swirling gas crossflow. Atomization and Sprays, Vol. 29, No. 5, 2019, pp. 1–17.10.1615/AtomizSpr.2019031322 ↗
41. He, Y., H. Ding, L. Liu, and K. Shin. Computer simulation of 2D grain growth using a cellular automata model based on the lowest energy principle. Materials Science and Engineering: A, Vol. 429, No. 1, 2006, pp. 236–246.10.1016/j.msea.2006.05.070 ↗
42. Trovati, G., E. A. Sanches, S. C. Neto, Y. P. Mascarenhas, and G. O. Chierice. Characterization of polyurethane resins by FTIR, TGA, and XRD. Journal of Applied Polymer Science, Vol. 115, No. 1, 2010, pp. 263–268.10.1002/app.31096 ↗
43. Bruckman, V. J. and K. Wriessnig. Improved soil carbonate determination by FT-IR and X-ray analysis. Environmental Chemistry Letters, Vol. 11, No. 1, 2013, pp. 65–70.10.1007/s10311-012-0380-4 ↗
44. Sarva, S. S., D. Stephanie, C. B. Mary, and C. Weinong. Stress–strain behavior of a polyurea and a polyurethane from low to high strain rates. Polymer, Vol. 48, No. 8, 2007, pp. 2208–2213.10.1016/j.polymer.2007.02.058 ↗
45. Miao, Y., H. He, and Z. Li. Strain hardening behaviors and mechanisms of polyurethane under various strain rate loading. Polymer Engineering & Science, Vol. 60, 2020, pp. 1083–1092.10.1002/pen.25364 ↗
46. Hossain, D., M. A. Tschopp, D. K. Ward, J. L. Bouvard, P. Wang, and M. F. Horstemeyer. Molecular dynamics simulations of deformation mechanisms of amorphous polyethylene. Polymer, Vol. 51, No. 25, 2010, pp. 6071–6083.10.1016/j.polymer.2010.10.009 ↗
47. Zuo, H., Y. H. Chen, H. B. Bai, and H. Sun. The compression deformation mechanism of a metallic rubber. International Journal of Mechanics and Materials in Design, Vol. 2, No. 3, 2005, pp. 269–277.10.1007/s10999-006-9007-x ↗
48. Goods, S. H., C. L. Neuschwanger, C. C. Henderson, and D. M. Skala. Mechanical properties of CRETE, a polyurethane foam. Journal of Applied Polymer Science, Vol. 68, No. 7, 1998, pp. 1045–1055.10.1002/(SICI)1097-4628(19980516)68:7<1045::AID-APP2>3.0.CO;2-F ↗
49. Chen, S., J. Hu, Y. Liu, H. Liem, and Q. Meng. Effect of molecular weight on shape memory behavior in polyurethane films. Polymer International, Vol. 56, No. 9, 2010, pp. 1128–1134.10.1002/pi.2248 ↗
50. Glema, A., T. Lodygowski, P. Perzyna, and W. Sumelka. The numerical analysis of the intrinsic anisotropic microdamage evolution in the elasto-viscoplastic material model. International Journal of Damage Mechanics, Vol. 18, No. 18, 2010, pp. 205–231.10.1177/1056789508097543 ↗
51. Voyiadjis, G. Z., J. Ju, J. L. Chaboche. Damage mechanics in engineering materials. The Winter Annual Meeting of the American Society of Mechanical Engineers, New York, N.Y., 1998.
52. Sumelka, W., M. Nowak, A. A. Nassr, H. Al-Rifaie, M. Malendowski, T. Gajewski, et al. Dynamic failure of the aluminium plate under air-blast loading in the framework of the fractional viscoplasticity model - theory and validation. International Journal of Impact Engineering, Vol. 158, 2021, id. 104024.10.1016/j.ijimpeng.2021.104024 ↗
53. Voyiadjis, G. Z., R. Al-Rub, and A. N. Palazotto. Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient theory. International Journal of Plasticity, Vol. 20, No. 6, 2004, pp. 981–1038.10.1016/j.ijplas.2003.10.002 ↗
54. Al-Rub, R. K. A., D. W. Lee, K. A. Khan, and A. N. Palazotto. Effective anisotropic elastic and plastic yield properties of periodic foams derived from triply periodic Schoen’s I-WP minimal surface. Journal of Engineering Mechanics, Vol. 146, No. 5, 2020, id. 04020030.10.1061/(ASCE)EM.1943-7889.0001759 ↗
55. Shi, Z. M., J. T. Li, and Y. Zhao. Study on damage evolution and constitutive model of sandstone under the coupled effects of wetting-drying cycles and cyclic loading. Engineering Fracture Mechanics, Vol. 5, 2021, id. 107883.10.1016/j.engfracmech.2021.107883 ↗
56. Wang, B., F. Wang, and Q. Wang. Damage constitutive models of concrete under the coupling action of freeze–thaw cycles and load based on Lemaitre assumption. Construction & Building Materials, Vol. 173, 2018, pp. 332–341.10.1016/j.conbuildmat.2018.04.054 ↗
57. Kim, H., C. Paik, Y. Chung, and Y. J. Kim. Investigating the length of data collection period with respect to rate constant in the first-order decay model. Journal of Material Cycles & Waste Management, Vol. 19, No. 1, 2017, pp. 32–37.10.1007/s10163-015-0378-7 ↗
58. Birrell, M., R. Astroza, J. I. Restrepo, K. Loftizadeh, and F. Hernández. Bayesian inference for calibration and validation of uniaxial reinforcing steel models. Engineering Structures, Vol. 243, No. 1, 2021, id. 112386.10.1016/j.engstruct.2021.112386 ↗
59. Kabir, H. and M. M. Aghdam. A generalized 2D Bézier-based solution for stress analysis of notched epoxy resin plates reinforced with graphene nanoplatelets. Thin-Walled Structures, Vol. 169, 2021, id. 108484.10.1016/j.tws.2021.108484 ↗