Effect of storage time and temperature on dissolved state of cellulose in TBAH-based solvents and mechanical property of regenerated films
Source abstract
Abstract
Abstract Storage of cellulose solution can be practically ineluctable before it is manufactured into various regenerated products (e.g., fibers, films), especially in the case of industrial production. Therefore, it is necessary to evaluate the effect of storage time and temperature on the dissolved state of cellulose in the interested TBAH-based solvents (including TBAH/H2O, TBAH/H2O/DMSO, TBAH/H2O/Urea), as well as on the mechanical property of the relevant regenerated products (films were prepared in this work for the evaluation). The dissolved state of cellulose in these solvents along with storage has been analyzed with the polarized light microscope photographs and Stormer viscosity. Focus on the interested TBAH/H2O/DMSO solvent, the effect of storage time and temperature on the solution viscosity, and degree of polymerization of cellulose have been discussed. Critical storage time for different storing temperature has been determined, after where significant cellulose degradation happens. A series of regenerated cellulose films with storage time ranging from 0 to 200 h have been prepared. The optimal storage time and strengthening mechanism for cellulose films regenerated from the solution of cellulose/TBAH/H2O/DMSO have been discussed. This work can provide reference about storage time and temperature of cellulose/TBAH/H2O/DMSO, especially for the production of pilot-scale, etc.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University , 111 North Section I, No. 2 Ring Road, Jinniu District , Chengdu , Sichuan, 6100F31 , China
References (39)
Show source-provided references
1. Huber, T., J. Müssig, O. Curnow, S. Pang, S. Bickerton, and M. P. Staiger. A critical review of all-cellulose composites. Journal of Materials Science, Vol. 47, No. 3, 2011, pp. 1171–1186.10.1007/s10853-011-5774-3 ↗
2. Chirayil, C. J., L. Mathew, and S. Thomas. Review of recent research in nano cellulose preparation from different lignocellulosic fibers. Reviews on Advanced Materials Science, Vol. 37, No. 1–2, 2014, pp. 20–28.
3. Ahn, J., S. Pak, Y. Song, and H. Kim. In-situ synthesis of carbon dot at cellulose nanofiber for durable water treatment membrane with high selectivity. Carbohydrate Polymers, Vol. 255, No. 1, 2021, id. 117387.10.1016/j.carbpol.2020.117387 ↗
4. Gupta, K. M. and J. W. Jiang. Cellulose dissolution and regeneration in ionic liquids: a computational perspective. Chemical Engineering Science, Vol. 121, 2015, pp. 180–189.10.1016/j.ces.2014.07.025 ↗
5. Johnson, R. D. J., V. A. Prabu, P. Amuthakkannan, and K. A. Prasath. A review on biocomposites and bioresin based composites for potential industrial applicationsc. Reviews on Advanced Materials Science, Vol. 49, No. 1, 2017, pp. 112–121.
6. Hina, S., Y. M. Zhang, and H. P. Wang. Role of ionic liquids in dissolution and regeneration of cellulose. Reviews on Advanced Materials Science, Vol. 40, No. 3, 2015, pp. 215–226.
7. Ahmed, A., X. Wang, and M. Yang. Biocompatible materials of pulsatile and rotary blood pumps: a brief review. Reviews on Advanced Materials Science, Vol. 59, No. 1, 2020, pp. 322–339.10.1515/rams-2020-0009 ↗
8. Syafiq, R. M. O., S. M. Sapuan, and M. R. M. Zuhri. Effect of cinnamon essential oil on morphological, flammability and thermal properties of nanocellulose fibre-reinforced starch biopolymer composites. Nanotechnology Reviews, Vol. 9, No. 1, 2020, pp. 1147–1159.10.1515/ntrev-2020-0087 ↗
9. Shamsuri, A. A. and R. Daik. Applications of ionic liquids and their mixtures for preparation of advanced polymer blends and composites: a short review. Reviews on Advanced Materials Science, Vol. 40, No. 1, 2015, pp. 45–59.
10. Sahari, J. and S. M. Sapuan. Natural fibre reinforced biodegradable polymer composites. Reviews on Advanced Materials Science, Vol. 30, No. 2, 2012, pp. 166–174.
11. Thompson, L., J. Azadmanjiri, M. Nikzad, I. Sbarski, J. Wang, and A. M. Yu. Cellulose nanocrystals: production, functionalization and advanced applications. Reviews on Advanced Materials Science, Vol. 58, No. 1, 2019, pp. 1–16.10.1515/rams-2019-0001 ↗
12. Frey-Wyssling, A. On the crystal structure of cellulose I. Biochimica et Biophysica Acta, Vol. 18, 1955, pp. 166–168.10.1016/0006-3002(55)90039-1 ↗
13. Sidikov, A. S., O. N. Bozorov, R. S. Saifutdinov, G. R. Rakhmanberdiev, and T. M. Mirkamilov. Effect of supramolecular and morphological structure on cellulose characteristics. Chemistry of Natural Compounds, Vol. 36, No. 6, 2000, pp. 616–619.10.1023/A:1017532229331 ↗
14. Yang, S., L. Chen, S. Liu, W. Hou, J. Zhu, P. Zhao, et al. Facile and sustainable fabrication of high-performance cellulose sponge from cotton for oil-in-water emulsion separation. Journal of Hazardous Materials, Vol. 408, 2021, id. 124408.10.1016/j.jhazmat.2020.124408 ↗
15. Yang, Y. P., Y. Zhang, Y. X. Lang, and M. H. Yu. Structure development in the condensed state of cellulose fiber regenerated from alkali complex solution. Cellulose, Vol. 25, No. 3, 2018, pp. 1555–1569.10.1007/s10570-018-1649-y ↗
16. Oh, S. Y., D. I. Yoo, Y. Shin, H. Y. Kim, H. C. Kim, Y. S. Chung, et al. Preparation of regenerated cellulose fiber via carbonation (II) – spinning and characterization. Fibers and Polymers, Vol. 6, No. 2, 2005, pp. 95–102.10.1007/BF02875598 ↗
17. Chen, X., C. Burger, F. Wan, J. Zhang, L. Rong, B. S. Hsiao, et al. Structure study of cellulose fibers wet-spun from environmentally friendly NaOH/urea aqueous solutions. Biomacromolecules, Vol. 8, No. 6, 2007, pp. 1918–1926.10.1021/bm061186i ↗
18. Hu, X., Z. Yang, S. Kang, M. Jiang, Z. Zhou, J. Gou, et al. Cellulose hydrogel skeleton by extrusion 3d printing of solution. Nanotechnology Reviews, Vol. 9, No. 1, 2020, pp. 345–353.10.1515/ntrev-2020-0025 ↗
19. Yu, T., S. A. Soomro, F. Huang, W. Wei, B. Wang, Z. Zhou, et al. Naturally or artificially constructed nanocellulose architectures for epoxy composites: A review. Nanotechnology Reviews, Vol. 9, No. 1, pp. 1643–1659.10.1515/ntrev-2020-0116 ↗
20. Akerholm, M., B. Hinterstoisser, and L. Salmen. Characterization of the crystalline structure of cellulose using static and dynamic FT-IR spectroscopy. Carbohydrate Research, Vol. 339, No. 3, 2004, pp. 569–578.10.1016/j.carres.2003.11.012 ↗
21. Yan, L., J. Chen, and P. R. Bangal. Dissolving cellulose in a NaOH/thiourea aqueous solution: a topochemical investigation. Macromol Biosci, Vol. 7, No. 9–10, 2007, pp. 1139–1148.10.1002/mabi.200700072 ↗
22. Zhang, S. A., F. X. Li, J. Y. Yu, and Y. L. Hsieh. Dissolution behaviour and solubility of cellulose in NaOH complex solution. Carbohydrate Polymers, Vol. 81, No. 3, 2010, pp. 668–674.10.1016/j.carbpol.2010.03.029 ↗
23. Kuo, Y. N. and J. Hong. Investigation of solubility of micro crystalline cellulose in aqueous NaOH. Polymers for Advanced Technologies, Vol. 16, No. 5, 2005, pp. 425–428.10.1002/pat.595 ↗
24. Wei, W., X. Wei, G. Gou, M. Jiang, X. Xu, Y. Wang, et al. Improved dissolution of cellulose in quaternary ammonium hydroxide by adjusting temperature. RSC Advances, Vol. 5, No. 49, 2015, pp. 39080–39083.10.1039/C5RA04247J ↗
25. Moulthrop, J. S., R. P. Swatloski, G. Moyna, and R. D. Rogers. High-resolution c-13 nmr studies of cellulose and cellulose oligomers in ionic liquid solutions. Chemical Communications, Vol. 1, No. 12, 2005, pp. 1557–1559.10.1039/b417745b ↗
26. Dissanayake, N., V. D. Thalangamaarachchige, M. Thakurathi, M. Knight, E. L. Quitevis, and N. Abidi. Dissolution of cotton cellulose in 1:1 mixtures of 1-butyl-3-methylimidazolium methylphosphonate and 1-alkylimidazole co-solvents. Carbohydrate Polymers, Vol. 221, 2019, pp. 63–72.10.1016/j.carbpol.2019.05.071 ↗
27. Wang, M., T. Yu, L. Tan, W. Li, W. Wei, M. Jiang, et al. An eco-friendly approach to preparing cellulose nanocrystals by precisely controlling the dissolution of natural cellulose in TBAH/H2O solvent. Cellulose, Vol. 27, No. 16, 2020, pp. 9311–9324.10.1007/s10570-020-03418-w ↗
28. Gericke, M., K. Schlufter, T. Liebert, T. Heinze, and T. Budtova. Rheological properties of cellulose/ionic liquid solutions: From dilute to concentrated states. Biomacromolecules, Vol. 10, No. 5, 2009, pp. 1188–1194.10.1021/bm801430x ↗
29. Cruz, H., M. Fanselow, J. D. Holbrey, and K. R. Seddon. Determining relative rates of cellulose dissolution in ionic liquids through in situ viscosity measurement. Chemical Communications, Vol. 48, No. 45, 2012, pp. 5620–5622.10.1039/c2cc31487h ↗
30. Cao, J., W. Wei, G. Gou, M. Jiang, Y. Cui, S. Zhang, et al. Cellulose films from the aqueous dmso/tbah-system. Cellulose, Vol. 25, No. 3, 2018, pp. 1975–1986.10.1007/s10570-017-1639-5 ↗
31. Dorn, S., F. Wendler, F. Meister, and T. Heinze. Interactions of ionic liquids with polysaccharides-7: Thermal stability of cellulose in ionic liquids and n-methylmorpholine-n-oxide. Macromolecular Materials and Engineering, Vol. 293, No. 11, 2008, pp. 907–913.10.1002/mame.200800153 ↗
32. Drechsler, U., S. Radosta, and W. Vorwerg. Characterization of cellulose in solvent mixtures with n-methylmorpholine-n-oxide by static light scattering. Macromolecular Chemistry and Physics, Vol. 201, No. 15, 2000, pp. 2023–2030.10.1002/1521-3935(20001001)201:15<2023::AID-MACP2023>3.0.CO;2-6 ↗
33. Abe, M., Y. Fukaya, and H. Ohno. Fast and facile dissolution of cellulose with tetrabutylphosphonium hydroxide containing 40 wt% water. Chemical Communications, Vol. 48, No. 12, 2012, pp. 1808–1810.10.1039/c2cc16203b ↗
34. Chen, X., X. Chen, X.-M. Cai, S. Huang, and F. Wang. Cellulose dissolution in a mixed solvent of tetra(n-butyl)ammonium hydroxide/dimethyl sulfoxide via radical reactions. Acs Sustainable Chemistry & Engineering, Vol. 6, No. 3, 2018, pp. 2898–2904.10.1021/acssuschemeng.7b04491 ↗
35. Bu, D., X. Hu, Z. Yang, X. Yang, W. Wei, M. Jiang, et al. Elucidation of the relationship between intrinsic viscosity and molecular weight of cellulose dissolved in tetra-n-butyl ammonium hydroxide/dimethyl sulfoxide. Polymers, Vol. 11, No. 10, 2019, id. 1605.10.3390/polym11101605 ↗
36. Kosan, B., C. Michels, and F. Meister. Dissolution and forming of cellulose with ionic liquids. Cellulose, Vol. 15, No. 1, 2008, pp. 59–66.10.1007/s10570-007-9160-x ↗
37. Špérová, M., P. Nasadil, A. Průšová, and J. Kučerík. A hint on the correlation between cellulose fibers polymerization degree and their thermal and thermo-oxidative degradation. Journal of Thermal Analysis and Calorimetry, Vol. 110, No. 1, 2012, pp. 71–76.10.1007/s10973-012-2295-5 ↗
38. Henniges, U., M. Kostic, A. Borgards, T. Rosenau, and A. Potthast. Dissolution behavior of different celluloses. Biomacromolecules, Vol. 12, No. 4, 2011, pp. 871–879.10.1021/bm101555q ↗
39. Liu, J., J. Zhang, B. Zhang, X. Zhang, L. Xu, J. Zhang, et al. Determination of intrinsic viscosity-molecular weight relationship for cellulose in bmimac/dmso solutions. Cellulose, Vol. 23, No. 4, 2016, pp. 2341–2348.10.1007/s10570-016-0967-1 ↗