journal article·2026-01-23Open access

Sustainable approach to control autogenous shrinkage in low water–cement ratio concretes

Hawreen H. Ahmed

Abstract

Abstract This study investigated the effect of pre-saturated coconut fibres (CF) on the performance of high-performance concrete (HPC) under standard, membrane, and drying curing conditions. Mechanical and permeability related properties and autogenous shrinkage of HPC mixes were examined. Results indicated that CF proves beneficial for concrete cured in dry conditions, proving their internal curing effect. The tensile strength improved by 21–25 % in CF-reinforced mixes under drying conditions, demonstrating effective crack resistance. Water absorption increased minimally in fibrous mixes under moisture-deficient conditions, while chloride ion penetration was reduced, indicating improvement in durability. Autogenous shrinkage decreased by 18.5–65.2 %, depending on fibre dosage. These findings highlight the potential of pre-saturated CF to improve the performance and durability of HPC, particularly in environments with limited external curing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete Properties and Behavior · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Highway and Bridge Engineering, Technical Engineering College , Erbil Polytechnic University , Erbil 44001 , Iraq

References (53)

Show source-provided references
1. Wu, L, Farzadnia, N, Shi, C, Zhang, Z, Wang, H. Autogenous shrinkage of high performance concrete: a review. Constr Build Mater 2017;149:62–75. https://doi.org/10.1016/j.conbuildmat.2017.05.064.10.1016/j.conbuildmat.2017.05.064 ↗
2. Tazawa, E, Miyazawa, S. Experimental study on mechanism of autogenous shrinkage of concrete. Cem Concr Res 1995;25:1633–8. https://doi.org/10.1016/0008-8846(95)00159-x.10.1016/0008-8846(95)00159-X ↗
3. Shi, C, Wu, Z, Xiao, J, Wang, D, Huang, Z, Fang, Z. A review on ultra high performance concrete: part I. Raw materials and mixture design. Constr Build Mater 2015;101:741–51. https://doi.org/10.1016/j.conbuildmat.2015.10.088.10.1016/j.conbuildmat.2015.10.088 ↗
4. Zhao, Y, Xu, B, Chang, J. Addition of pre‐wetted lightweight aggregate and steel/polypropylene fibers in high‐performance concrete to mitigate autogenous shrinkage. Struct Concr 2020;21:1134–43. https://doi.org/10.1002/suco.201900280.10.1002/suco.201900280 ↗
5. Cheng, S, Shui, Z, Yu, R, Sun, T, Zhang, X. Multiple influences of internal curing and supplementary cementitious materials on the shrinkage and microstructure development of reefs aggregate concrete. Constr Build Mater 2017;155:522–30. https://doi.org/10.1016/j.conbuildmat.2017.08.037.10.1016/j.conbuildmat.2017.08.037 ↗
6. Wang, Q, Wang, Y-Y, Geng, Y, Zhang, H. Experimental study and prediction model for autogenous shrinkage of recycled aggregate concrete with recycled coarse aggregate. Constr Build Mater 2021;268:121197. https://doi.org/10.1016/j.conbuildmat.2020.121197.10.1016/j.conbuildmat.2020.121197 ↗
7. Li, Z, Liu, J, Xiao, J, Zhong, P. Internal curing effect of saturated recycled fine aggregates in early-age mortar. Cem Concr Compos 2020;108:103444. https://doi.org/10.1016/j.cemconcomp.2019.103444.10.1016/j.cemconcomp.2019.103444 ↗
8. Noushini, A, Vessalas, K, Arabian, G, Samali, B. Drying shrinkage behaviour of fibre reinforced concrete incorporating polyvinyl alcohol fibres and fly ash. Adv Civ Eng 2014;2014:836173–10. https://doi.org/10.1155/2014/836173.10.1155/2014/836173 ↗
9. Pakravan, HR, Latifi, M, Jamshidi, M. Hybrid short fiber reinforcement system in concrete: a review. Constr Build Mater 2017;142:280–94. https://doi.org/10.1016/j.conbuildmat.2017.03.059.10.1016/j.conbuildmat.2017.03.059 ↗
10. Li, S, Qian, H, Xu, Z. Study on early-age shrinkage and crack resistance of fiber reinforced self-compacting concrete. Bull Chin Ceram Soc 2014;33:3140–4.
11. Saje, D, Bandelj, B, Šušteršič, J, Lopatič, J, Saje, F. Shrinkage of polypropylene fiber-reinforced high-performance concrete. J Mater Civ Eng 2011;23:941–52. https://doi.org/10.1061/(asce)mt.1943-5533.0000258.10.1061/(ASCE)MT.1943-5533.0000258 ↗
12. Sangkeaw, P, Masunaga, KM, Iyoda, T, Thongchom, C. Evaluation of autogenous shrinkage and thermal behavior of cellulose fiber and synthetic fiber reinforced high-strength concrete. Eng Sci 2024;31:1259. https://doi.org/10.30919/es1259.10.30919/es1259 ↗
13. Das, AK, Jiang, J, Leung, CKY. ECCSrm: a novel meso-scale finite element model to simulate shrinkage of engineered cementitious composites (ECCs) incorporaring fiber characteristics. Constr Build Mater 2025;461:139753. https://doi.org/10.1016/j.conbuildmat.2024.139753.10.1016/j.conbuildmat.2024.139753 ↗
14. Kawashima, S, Shah, SP. Early-age autogenous and drying shrinkage behavior of cellulose fiber-reinforced cementitious materials. Cem Concr Compos 2011;33:201–8. https://doi.org/10.1016/j.cemconcomp.2010.10.018.10.1016/j.cemconcomp.2010.10.018 ↗
15. Ozawa, M, Parajuli, SS, Uchida, Y, Zhou, B. Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material. Constr Build Mater 2019;206:219–25.10.1016/j.conbuildmat.2019.02.056 ↗
16. Lura, P, Toropovs, N, Justs, J, Shakoorioskooie, M, Münch, B, Griffa, M. Mitigation of plastic shrinkage cracking with natural fibers – kenaf, abaca, coir, jute and sisal. Cem Concr Compos 2025;155:105827. https://doi.org/10.1016/j.cemconcomp.2024.105827.10.1016/j.cemconcomp.2024.105827 ↗
17. Al-Massri, G, Ghanem, H, Khatib, J, Kırgız, MS, Elkordi, A. Chemical shrinkage, autogenous shrinkage, drying shrinkage, and expansion stability of interfacial transition zone material using alkali-treated banana fiber for concrete. J Struct Integr Maint 2024;9:2390650. https://doi.org/10.1080/24705314.2024.2390650.10.1080/24705314.2024.2390650 ↗
18. Alomayri, T, Ali, B. Investigating the load-deflection behaviour and drying shrinkage resistance of HPC reinforced using different cellulose fibres. J Build Eng 2023;73:106714. https://doi.org/10.1016/j.jobe.2023.106714.10.1016/j.jobe.2023.106714 ↗
19. Ahuja, SC, Ahuja, U, Ahuja, S. Coconut-history, uses, and folklore. Asian Agri Hist 2014;18.
20. Ali, M, Chouw, N. Experimental investigations on coconut-fibre rope tensile strength and pullout from coconut fibre reinforced concrete. Constr Build Mater 2013;41:681–90. https://doi.org/10.1016/j.conbuildmat.2012.12.052.10.1016/j.conbuildmat.2012.12.052 ↗
21. Khan, M, Rehman, A, Ali, M. Efficiency of silica-fume content in plain and natural fiber reinforced concrete for concrete road. Constr Build Mater 2020;244:118382. https://doi.org/10.1016/j.conbuildmat.2020.118382.10.1016/j.conbuildmat.2020.118382 ↗
22. Shah, SHA, Amir, MT, Ali, B, El Ouni, MH. Mechanical performance and environmental impact of normal strength concrete incorporating various levels of coconut fiber and recycled aggregates. Environ Sci Pollut Res 2022;29:1–16. https://doi.org/10.1007/s11356-022-21608-w.10.1007/s11356-022-21608-w ↗
23. Ali, B, Qureshi, LA, Kurda, R. Environmental and economic benefits of steel, glass, and polypropylene fiber reinforced cement composite application in jointed plain concrete pavement. Compos Commun 2020;22:100437. https://doi.org/10.1016/j.coco.2020.100437.10.1016/j.coco.2020.100437 ↗
24. Tomlinson, PB. The Coconut Palm. In: Y Frémond, R Ziller, M De Nucé De Lamothe. Translated from the French edition (Paris, 1966). Berne: International Potash Institute; 1968. 225 pp., illus. Sw. F. 13.10.1126/science.162.3854.660-b ↗
25. Ahmad, W, Farooq, SH, Usman, M, Khan, M, Ahmad, A, Aslam, F, et al.. Effect of coconut fiber length and content on properties of high strength concrete. Materials (Basel) 2020;13:1075. https://doi.org/10.3390/ma13051075.10.3390/ma13051075 ↗
26. Alomayri, T, Ali, B. Effect of plant fiber type and content on the strength and durability performance of high-strength concrete. Constr Build Mater 2023;394:132166. https://doi.org/10.1016/j.conbuildmat.2023.132166.10.1016/j.conbuildmat.2023.132166 ↗
27. Ali, B, Hawreen, A, Kahla, N, Amir, M, Azab, M, Raza, A. A critical review on the utilization of coir (coconut fiber) in cementitious materials. Constr Build Mater 2022;351:128957.10.1016/j.conbuildmat.2022.128957 ↗
28. Das, AK. Natural sea-based materials SBM-ECCs: experimental, analytical, and machine learning approaches to early-age behavior and modulating factors. Appl Soft Comput 2026;186:114101. https://doi.org/10.1016/j.asoc.2025.114101.10.1016/j.asoc.2025.114101 ↗
29. ASTM-C150. Standard specification for Portland cement. West Conshohocken, PA, USA: ASTM International; 2018.
30. ASTM-C618. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. West Conshohocken, PA; 2017.
31. Aıtcin, PC. The durability characteristics of high performance concrete: a review. Cem Concr Compos 2003;25:409–20.10.1016/S0958-9465(02)00081-1 ↗
32. Qureshi, LA, Ali, B, Ali, A. Combined effects of supplementary cementitious materials (silica fume, GGBS, fly ash and rice husk ash) and steel fiber on the hardened properties of recycled aggregate concrete. Constr Build Mater 2020;263:120636. https://doi.org/10.1016/j.conbuildmat.2020.120636.10.1016/j.conbuildmat.2020.120636 ↗
33. Islam, MS, Ahmed, SJU. Influence of jute fiber on concrete properties. Constr Build Mater 2018;189:768–76. https://doi.org/10.1016/j.conbuildmat.2018.09.048.10.1016/j.conbuildmat.2018.09.048 ↗
34. ASTM C138/C138M-17a. Standard test method for density (Unit Weight), yield, and air content (Gravimetric) of concrete. West Conshohocken, PA: ASTM International; 2017. www.astm.org.
35. ASTM-C143. Standard test method for slump of hydraulic-cement concrete. West Conshohocken, PA: ASTM International; 2015.
36. ASTM-C231. Testing air content of concrete with a type B pressure meter. West Conshohocken, PA: ASTM International; 2003.
37. ASTM-C39. Standard test method for compressive strength of cylindrical concrete specimens. West Conshohocken, PA, USA: ASTM International; 2015.
38. ASTM-C496. Standard test method for splitting tensile strength of cylindrical concrete specimens. West Conshohocken, PA: ASTM International; 2017.
39. ASTM-C642-13. Standard test method for density, absorption, and voids in hardened concrete. West Conshohocken, PA: ASTM International; 2013.
40. ASTM-C1202. Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. West Conshohocken, PA: ASTM International; 2017.
41. Kohno, K, Okamoto, T, Isikawa, Y, Sibata, T, Mori, H. Effects of artificial lightweight aggregate on autogenous shrinkage of concrete. Cem Concr Res 1999;29:611–14. https://doi.org/10.1016/s0008-8846(98)00202-6.10.1016/S0008-8846(98)00202-6 ↗
42. Kazmi, SMS, Munir, MJ, Wu, Y-F, Patnaikuni, I, Zhou, Y, Xing, F. Axial stress-strain behavior of macro-synthetic fiber reinforced recycled aggregate concrete. Cem Concr Compos 2019;97:341–56. https://doi.org/10.1016/j.cemconcomp.2019.01.005.10.1016/j.cemconcomp.2019.01.005 ↗
43. Munir, MJ, Kazmi, SMS, Wu, Y-F, Lin, X, Ahmad, MR. Axial stress-strain performance of recycled aggregate concrete reinforced with macro-polypropylene fibres. Sustainability 2021;13:5741. https://doi.org/10.3390/su13105741.10.3390/su13105741 ↗
44. Wang, C, Guo, Z, Niu, D. Influence of the fiber volume content on the durability-related properties of polypropylene-fiber-reinforced concrete. Sustainability 2020;12:549. https://doi.org/10.3390/su12020549.10.3390/su12020549 ↗
45. Ali, B, Qureshi, LA. Influence of glass fibers on mechanical and durability performance of concrete with recycled aggregates. Constr Build Mater 2019;228:116783. https://doi.org/10.1016/j.conbuildmat.2019.116783.10.1016/j.conbuildmat.2019.116783 ↗
46. Nahata, Y, Kholia, N, Tank, TG. Effect of curing methods on efficiency of curing of cement mortar. APCBEE Procedia 2014;9:222–9. https://doi.org/10.1016/j.apcbee.2014.01.040.10.1016/j.apcbee.2014.01.040 ↗
47. Velandia, DF, Lynsdale, CJ, Provis, JL, Ramirez, F. Effect of mix design inputs, curing and compressive strength on the durability of Na2SO4-activated high volume fly ash concretes. Cem Concr Compos 2018;91:11–20. https://doi.org/10.1016/j.cemconcomp.2018.03.028.10.1016/j.cemconcomp.2018.03.028 ↗
48. Kurda, R, de Brito, J, Silvestre, JD. Water absorption and electrical resistivity of concrete with recycled concrete aggregates and fly ash. Cem Concr Compos 2019;95:169–82. https://doi.org/10.1016/j.cemconcomp.2018.10.004.10.1016/j.cemconcomp.2018.10.004 ↗
49. Jongvisuttisun, P, Leisen, J, Kurtis, KE. Key mechanisms controlling internal curing performance of natural fibers. Cem Concr Res 2018;107:206–20. https://doi.org/10.1016/j.cemconres.2018.02.007.10.1016/j.cemconres.2018.02.007 ↗
50. Feng, S, Lyu, J, Xiao, H, Feng, J. Application of cellulose fibre in ultra-high-performance concrete to mitigate autogenous shrinkage. J Sustain Cem Mater 2023;12:842–55. https://doi.org/10.1080/21650373.2022.2119618.10.1080/21650373.2022.2119618 ↗
51. Lura, P, Wyrzykowski, M, Tang, C, Lehmann, E. Internal curing with lightweight aggregate produced from biomass-derived waste. Cem Concr Res 2014;59:24–33. https://doi.org/10.1016/j.cemconres.2014.01.025.10.1016/j.cemconres.2014.01.025 ↗
52. Das, AK, Qiu, J, Leung, CKY, Yu, J. A novel strategy to assess healing induced recovery of mechanical properties (HIRMP) of strain hardening/engineering cementitious composites (SHCCs/ECCs) in autogenous healing. Cem Concr Compos 2023;142:105177. https://doi.org/10.1016/j.cemconcomp.2023.105177.10.1016/j.cemconcomp.2023.105177 ↗
53. Kouta, N, Saliba, J, Saiyouri, N. Effect of flax fibers on early age shrinkage and cracking of earth concrete. Constr Build Mater 2020;254:119315. https://doi.org/10.1016/j.conbuildmat.2020.119315.10.1016/j.conbuildmat.2020.119315 ↗