Morphological and microstructural analysis of sustainable concrete with crumb rubber and SCMs
Source abstract
Abstract
Abstract The environmental burden of Portland cement production, a major contributor to global CO 2 emissions, calls for innovative material solutions in concrete technology. This study examines the morphological and microstructural characteristics of sustainable concrete incorporating crumb rubber (CR), fly ash (FA), silica fume (SF), and marble slurry powder (MSP). Fifteen hybrid mix designs were prepared and characterized using X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy to investigate phase composition, hydration products, and interface morphology. The optimal mix containing 5% SF, 10% MSP, and 15% FA exhibited significant portlandite reduction (∼22–25%) and enhanced amorphous C–S–H gel formation, indicating strong pozzolanic interaction. MSP contributed to pore refinement and improved interfacial bonding, while CR, despite its non-reactive nature, enhanced the ductility and energy absorption potential of the matrix. Elemental mapping confirmed uniform distribution of Ca and Si, supporting improved hydration product formation and microstructural integrity. These findings demonstrate the synergistic effect of CR and supplementary cementitious materials in improving concrete’s internal structure and contribute to ongoing efforts to reduce the construction industry’s carbon footprint.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Civil Engineering, Maulana Azad National Institute of Technology , Bhopal , Madhya Pradesh, 462003 , India
Civil Engineering Department, Punjab Engineering College (Deemed to be University) , Chandigarh , 160012 , India
References (89)
Show source-provided references
1. PBL Netherlands Environmental Assessment Agency. Trend in global CO2 emissions: 2015 Report [Internet], PBL, The Hague, 2015. [cited 2025 Dec 4] https://www.pbl.nl/uploads/default/downloads/pbl-2015-trends-in-global-co2-emisions_2015-report_01803_4.pdf.
2. International Energy Agency. Technology roadmap – Low-carbon transition in the cement industry [Internet], IEA, Paris, 2018. [cited 2025 Dec 4] https://www.iea.org/reports/technology-roadmap-low-carbon-transition-in-the-cement-industry.
3. Lehner, P. and K. Hrabová. Evaluation of degradation and mechanical parameters and sustainability indicators of zeolite concretes. Construction and Building Materials, Vol. 371, 2023, id. 130791.10.1016/j.conbuildmat.2023.130791 ↗
4. Mostafaei, H., B. Badarloo, N. F. Chamasemani, M. A. Rostampour, and P. Lehner. Investigating the effects of concrete mix design on the environmental impacts of reinforced concrete structures. Buildings, Vol. 13, No. 5, 2023, id. 1313.10.3390/buildings13051313 ↗
5. Santhanam, M., S. Jain, and S. Bhattacherjee. Versatile concrete with limestone calcined clay cement. Indian Concrete Journal, Vol. 97, 2023, pp. 7–17.
6. Xiong, G., S. Al-Deen, X. Guan, Q. Qin, and C. Zhang. Economic and environmental benefit analysis between crumb rubber concrete and ordinary Portland cement concrete. Sustainability, Vol. 16, No. 11, 2024, id. 4758.10.3390/su16114758 ↗
7. Zhu, X. and Z. Jiang. Reuse of waste rubber in pervious concrete: experiment and DEM simulation. Journal of Building Engineering, Vol. 71, 2023, id. 106452.10.1016/j.jobe.2023.106452 ↗
8. Contec. Tire waste statistics: All you need to know [Internet]. 2024 [cited 2024 Jun 11]. https://contec.tech/tire-waste-statistics-need-to-know/.
9. Wang, K., T. Shan, B. Li, Y. Zheng, H. Xu, C. Wang, et al. Study on pyrolysis characteristics, kinetics and thermodynamics of waste tires catalytic pyrolysis with low-cost catalysts. Fuel, Vol. 356, 2024, id. 129644.10.1016/j.fuel.2023.129644 ↗
10. Material Recycling Association of India. Rubber & tyre [Internet]. 2023 [cited 2023 Dec 23]. https://mrai.org.in/theindustry/rubber.html.
11. Hu, Y., X. Yu, J. Ren, Z. Zeng, and Q. Qian. Waste tire valorization: Advanced technologies, process simulation, system optimization, and sustainability. Science of the Total Environment, Vol. 942, 2024, id. 173561.10.1016/j.scitotenv.2024.173561 ↗
12. Ahmed, I. Laboratory study on properties of rubber-soils. Publication FHWA/IN/JHRP-93/04, Joint Highway Research Project, Indiana Department of Transportation and Purdue University, West Lafayette (IN), 1993.
13. Fareghian, M., M. Afrazi, and A. Fakhimi. Soil reinforcement by waste tire textile fibers: small-scale experimental tests. Journal of Materials in Civil Engineering, Vol. 35, No. 2, 2023, id. 04022402.10.1061/(ASCE)MT.1943-5533.0004574 ↗
14. Ge, J., G. Mubiana, X. Gao, Y. Xiao, and S. Du. Research on static mechanical properties of high-performance rubber concrete. Frontiers in Materials, Vol. 11, 2024, Article 1426979.10.3389/fmats.2024.1426979 ↗
15. Raut, A. N., M. Adamu, R. J. Singh, Y. E. Ibrahim, A. L. Murmu, O. S. Ahmed, et al. Investigating crumb rubber-modified geopolymer composites derived from steel slag for enhanced thermal performance. Engineering Science and Technology, an International Journal, Vol. 59, 2024, id. 101880.10.1016/j.jestch.2024.101880 ↗
16. Janga, S., A. N. Raut, M. Adamu, Y. E. Ibrahim, and M. Albuaymi. Multi-response optimization of thermally efficient RC-based geopolymer binder using response surface methodology approach. Developments in the Built Environment, Vol. 19, 2024, id. 100528.10.1016/j.dibe.2024.100528 ↗
17. Chilukuri, S. K., A. N. Raut, S. Kumar, R. J. Singh, and V. Sakhare. Enhancing thermal performance and energy efficiency: optimal selection of steel slag crumb rubber blocks through multi-criteria decision making. Construction and Building Materials, Vol. 409, 2023, id. 134094.10.1016/j.conbuildmat.2023.134094 ↗
18. Bishnoi, S., and S. Maity. Limestone calcined clay cement: opportunities and challenges. Calcined clays for sustainable concrete, Scrivener, K, and F. Favier, eds., Springer, Singapore, 2020. (RILEM Bookseries; vol 25).10.1007/978-981-15-2806-4_88 ↗
19. Muñoz-Pérez, S. P., J. J. Lozano-Sánchez, D. M. Ramírez-Silva, J. E. Vallejos-Medianero, and J. D. D. Malpartida-Iturregui. Use and effect of fly ash in concrete: a literature review. Revista Facultad de Ingeniería Universidad de Antioquia, Vol. 111, 2024, pp. 105–118.10.17533/udea.redin.20230927 ↗
20. Tang, P. and H. J. H. Brouwers. The durability and environmental properties of self-compacting concrete incorporating cold bonded lightweight aggregates produced from combined industrial solid wastes. Construction and Building Materials, Vol. 167, 2018, pp. 271–285.10.1016/j.conbuildmat.2018.02.035 ↗
21. Ren, C., W. Wang, and G. Li. Preparation of high-performance cementitious materials from industrial solid waste. Construction and Building Materials, Vol. 152, 2017, pp. 39–47.10.1016/j.conbuildmat.2017.06.124 ↗
22. Choudhary, R., R. Gupta, T. Alomayri, A. Jain, and R. Nagar. Permeation, corrosion, and drying shrinkage assessment of self-compacting high strength concrete comprising waste marble slurry and fly ash, with silica fume. Structures, Vol. 33, 2021, pp. 971–985.10.1016/j.istruc.2021.05.008 ↗
23. Choudhary, R., R. Gupta, R. Nagar, and A. Jain. Mechanical and abrasion resistance performance of silica fume, marble slurry powder, and fly ash amalgamated high strength self-consolidating concrete. Construction and Building Materials, Vol. 269, 2021, id. 121282.10.1016/j.conbuildmat.2020.121282 ↗
24. Runganga, D., F. Okonta, and I. Musonda. Strength and durability properties of high-volume fly ash (HVFA) binders: A systematic review. CivilEng, Vol. 5, No. 2, 2024, pp. 435–460.10.3390/civileng5020022 ↗
25. Gambhir, M. L. Concrete technology, Tata McGraw-Hill Education, New Delhi, 2013.
26. Aslani, F., G. Ma, D. L. Y. Wan, and G. Muselin. Development of high-performance self-compacting concrete using waste recycled concrete aggregates and rubber granules. Journal of Cleaner Production, Vol. 182, 2018, pp. 553–566.10.1016/j.jclepro.2018.02.074 ↗
27. Güneyisi, E., M. Gesoglu, A. Al-Goody, and S. Ipek. Fresh and rheological behavior of nano-silica and fly ash blended self-compacting concrete. Construction and Building Materials, Vol. 95, 2015, pp. 29–44.10.1016/j.conbuildmat.2015.07.142 ↗
28. Santhakumar, A. R. Concrete technology, 2nd edn., Oxford University Press, New Delhi, 2018.
29. Mazloom, M., A. A. Ramezanianpour, and J. J. Brooks. Effect of silica fume on mechanical properties of high-strength concrete. Cement and Concrete Composites, Vol. 26, No. 4, 2004, pp. 347–357.10.1016/S0958-9465(03)00017-9 ↗
30. Khan, M. I. and R. Siddique. Utilization of silica fume in concrete: Review of durability properties. Resources, Conservation and Recycling, Vol. 57, 2011, pp. 30–35.10.1016/j.resconrec.2011.09.016 ↗
31. Sarıdemir, M. Effect of silica fume and ground pumice on compressive strength and modulus of elasticity of high strength concrete. Construction and Building Materials, Vol. 49, 2013, pp. 484–489.10.1016/j.conbuildmat.2013.08.091 ↗
32. Mishra, O. and S. P. Singh. An overview of microstructural and material properties of ultra-high-performance concrete. Journal of Sustainable Cement-Based Materials, Vol. 8, No. 1, 2019, pp. 1–47.10.1080/21650373.2018.1564398 ↗
33. Nazeer, M., K. Kapoor, and S. P. Singh. Strength, durability and microstructural investigations on pervious concrete made with fly ash and silica fume as supplementary cementitious materials. Journal of Building Engineering, Vol. 69, 2023, id. 106275.10.1016/j.jobe.2023.106275 ↗
34. Siddique, R. Utilization of silica fume in concrete: Review of hardened properties. Resources, Conservation and Recycling, Vol. 55, No. 11, 2011, pp. 923–932.10.1016/j.resconrec.2011.06.012 ↗
35. Azmee, N. M. and N. Shafiq. Ultra-high performance concrete: From fundamental to applications. Case Studies in Construction Materials, Vol. 9, 2018, id. e00197.10.1016/j.cscm.2018.e00197 ↗
36. Amran, M., S.-S. Huang, A. M. Onaizi, N. Makul, H. S. Abdelgader, and T. Ozbakkaloglu. Recent trends in ultra-high performance concrete (UHPC): Current status, challenges, and future prospects. Construction and Building Materials, Vol. 352, 2022, id. 129029.10.1016/j.conbuildmat.2022.129029 ↗
37. Nodehi, M. and S. E. Nodehi. Ultra high performance concrete (UHPC): Reactive powder concrete, slurry infiltrated fiber concrete and superabsorbent polymer concrete. Innovative Infrastructure Solutions, Vol. 7, 2022, id. 39.10.1007/s41062-021-00641-7 ↗
38. Luo, Y., S. Bao, and Y. Zhang. Recycling of granite powder and waste marble produced from stone processing for the preparation of architectural glass–ceramic. Construction and Building Materials, Vol. 346, 2022, id. 128408.10.1016/j.conbuildmat.2022.128408 ↗
39. Ergün, A. Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete. Construction and Building Materials, Vol. 25, No. 2, 2011, pp. 806–812.10.1016/j.conbuildmat.2010.07.002 ↗
40. Amin, M., M. Hadzima-Nyarko, I. S. Agwa, A. M. Zeyad, B. A. Tayeh, A. Adesina, et al. A review on the effect of marble powder on properties of self-compacting concrete. In 15th International Conference on Sustainable Green Construction and Nano-Technology (NTC), 2024.10.4028/p-gw4vSr ↗
41. Aliabdo, A. A., A. E. M. Abd Elmoaty, and E. M. Auda. Re-use of waste marble dust in the production of cement and concrete. Construction and Building Materials, Vol. 50, 2014, pp. 28–41.10.1016/j.conbuildmat.2013.09.005 ↗
42. Farooq, O., H. Bilal, L. Cavaleri, and A. Khan. Properties of blended mortars produced with recycled by-products from different waste streams. Developments in the Built Environment, Vol. 14, 2023, id. 100156.10.1016/j.dibe.2023.100156 ↗
43. Abdelkader, H., M. Hassan, and H. Ye. Influence of waste marble dust on the improvement of expansive clay soils. Advances in Civil Engineering, Vol. 2021, 2021, pp. 1–13.10.1155/2021/3192122 ↗
44. Adamu, M., H. Alanazi, Y. E. Ibrahim, and M. Abdellatief. Mechanical, microstructural characteristics and sustainability analysis of concrete incorporating date palm ash and eggshell powder as ternary blends cementitious materials. Construction and Building Materials, Vol. 411, 2024, id. 134753.10.1016/j.conbuildmat.2023.134753 ↗
45. Abdellatief, M., M. A. Elrahman, G. Elgendy, G. Bassioni, and A. M. Tahwia. Response surface methodology-based modelling and optimization of sustainable UHPC containing ultrafine fly ash and metakaolin. Construction and Building Materials, Vol. 388, 2023, id. 131696.10.1016/j.conbuildmat.2023.131696 ↗
46. Abdellatief, M., M. A. Elrahman, A. A. Abadel, M. Wasim, and A. Tahwia. Ultra-high performance concrete versus ultra-high performance geopolymer concrete: mechanical performance, microstructure, and ecological assessment. Journal of Building Engineering, Vol. 79, 2023, id. 107835.10.1016/j.jobe.2023.107835 ↗
47. Guerrero-Bustamante, O., R. Camargo, I. Dawd, J. Duque, R. Polo-Mendoza, J. Gálvis, et al. Implementation of crumb rubber (CR) in road pavements: A comprehensive literature review. Infrastructures, Vol. 9, No. 12, 2024, id. 223.10.3390/infrastructures9120223 ↗
48. Gettu, R., R. G. Pillai, M. Santhanam, S. Rathnarajan, A. S. Basavaraj, S. Rengaraju, et al. Service life and life-cycle assessment of reinforced concrete with fly ash and limestone calcined clay cement. In Proceedings of the Sixth International Conference on Durability of Concrete Structures; 2018 Jul 18–20, University of Leeds, Leeds, United Kingdom. Paper No. KN01.
49. Thorne, J., D. V. Bompa, M. F. Funari, and N. Garcia-Troncoso. Environmental impact evaluation of low-carbon concrete incorporating fly ash and limestone. Cleaner Materials, Vol. 12, 2024, id. 100242.10.1016/j.clema.2024.100242 ↗
50. Asadollahfardi, G., A. Katebi, P. Taherian, and A. Panahandeh. Environmental life cycle assessment of concrete with different mixed designs. International Journal of Construction Management, Vol. 21, No. 7, 2021, pp. 665–676.10.1080/15623599.2019.1579015 ↗
51. Barbhuiya, S., B. B. Das, and D. Adak. A comprehensive review on integrating sustainable practices and circular economy principles in concrete industry. Journal of Environmental Management, Vol. 370, 2024, id. 122702.10.1016/j.jenvman.2024.122702 ↗
52. Marsh, A. T. M., A. P. M. Velenturf, and S. A. Bernal. Circular economy strategies for concrete: implementation and integration. Journal of Cleaner Production, Vol. 362, 2022, id. 132486.10.1016/j.jclepro.2022.132486 ↗
53. Junaid, S., A. H. Khan, P. Alam. Cement replacement using pozzolanic materials: a sustainable approach. Recent developments and innovations in the sustainable production of concrete, A. H. Khan, Akhtar, M. N., Bani-Hani, K. A., eds., Woodhead Publishing, Cambridge, 2025, 185–214. (Woodhead Publishing Series in Civil and Structural Engineering).10.1016/B978-0-443-23895-6.00008-X ↗
54. Moolchandani, K., A. Sharma, and D. Kishan. Enhancing concrete performance with crumb rubber and waste materials: A study on mechanical and durability properties. Buildings, Vol. 14, No. 1, 2024, id. 161.10.3390/buildings14010161 ↗
55. Bureau of Indian Standards. IS 383: Specification for coarse and fine aggregates from natural sources for concrete, BIS, New Delhi (India), 1970.
56. Bureau of Indian Standards. IS 15388: Silica fume – Specification, BIS, New Delhi (India), 2003.
57. ASTM International. ASTM C1240-20: Standard specification for silica fume used in cementitious mixtures, ASTM International, West Conshohocken (PA), 2020.
58. Bureau of Indian Standards. IS 3812 (Part 2): Pulverised fuel ash – Specification for use as admixture in cement mortar and concrete, BIS, New Delhi (India), 2003.
59. Sika India. NS [online]. Navi Mumbai, India: Sika India Pvt. Ltd. [cited 16 March 2025]. [cited 2025 Mar 16] https://ind.sika.com/content/dam/dms/in01/g/sikaplast_-5202_ns.pdf
60. Choudhary, R., R. Gupta, and R. Nagar. Impact on fresh, mechanical, and microstructural properties of high strength self-compacting concrete by marble cutting slurry waste, fly ash, and silica fume. Construction and Building Materials, Vol. 239, 2020, id. 117888.10.1016/j.conbuildmat.2019.117888 ↗
61. Kontoleontos, F., P. Tsakiridis, A. Marinos, N. S. Katsiotis, V. Kaloidas, and M. Katsioti. Dry-grinded ultrafine cements hydration: physicochemical and microstructural characterization. Materials Research, Vol. 16, 2013, pp. 404–416.10.1590/S1516-14392013005000014 ↗
62. Muttashar, H. L., N. B. Ali, M. A. M. Ariffin, and M. W. Hussin. Microstructures and physical properties of waste garnets as a promising construction material. Case Studies in Construction Materials, Vol. 8, 2018, pp. 87–96.10.1016/j.cscm.2017.12.001 ↗
63. Lanzón, M., V. Cnudde, T. De Kock, and J. Dewanckele. Microstructural examination and potential application of rendering mortars made of tire rubber and expanded polystyrene wastes. Construction and Building Materials, Vol. 94, 2015, pp. 817–825.10.1016/j.conbuildmat.2015.07.086 ↗
64. Castellón, F. J., M. Ayala, and M. Lanzón. Influence of tire rubber waste on the fire behavior of gypsum coatings of construction and structural elements. Materiales de Construcción, Vol. 72, 2022, id. e275.10.3989/mc.2022.06421 ↗
65. Ahmadi, M., E. Abdollahzadeh, and M. Kioumarsi. Using marble waste as a partial aggregate replacement in the development of sustainable self-compacting concrete. Materials Today: Proceedings, 2023. 10.1016/j.matpr.2023.04.103.10.1016/j.matpr.2023.04.103 ↗
66. Belouadah, M., Z. E. A. Rahmouni, and N. Tebbal. Influence of the addition of glass powder and marble powder on the physical and mechanical behavior of composite cement. Procedia Computer Science, Vol. 158, 2019, pp. 366–375.10.1016/j.procs.2019.09.064 ↗
67. El-Sayed, H. A., A. B. Farag, A. M. Kandeel, A. A. Younes, and M. M. Yousef. Characteristics of the marble processing powder waste at Shaq El-Thoaban industrial area, Egypt, and its suitability for cement manufacture. HBRC Journal, Vol. 14, No. 2, 2018, pp. 171–179.10.1016/j.hbrcj.2016.06.002 ↗
68. Yaping, Y., Z. Xiaoqiang, Q. Weilan, and W. Mingwen. Synthesis of pure zeolites from supersaturated silicon and aluminium alkali extracts from fused coal fly ash. Fuel, Vol. 87, 2008, pp. 1880–1886.10.1016/j.fuel.2007.12.002 ↗
69. Rafieizonooz, M., M. Salim, M. Hussin, J. Mirza, S. Salmiati, and E. Khankhaje. Workability, compressive strength and leachability of coal ash concrete. Chemical Engineering Transactions, Vol. 56, 2017, pp. 439–444.
70. ASTM International. ASTM C1365-06: Standard test method for determination of the proportion of phases in Portland cement and Portland-cement clinker using X-ray powder diffraction analysis, ASTM International, West Conshohocken (PA), 2006.
71. ASTM International. ASTM C1723-22: Standard guide for examination of hardened concrete using scanning electron microscopy, ASTM International, West Conshohocken (PA), 2022.
72. ASTM International. ASTM E1508-19: Standard guide for quantitative analysis by energy-dispersive spectroscopy, ASTM International, West Conshohocken (PA), 2019.
73. ASTM International. ASTM E168-23: Standard practices for general techniques of infrared quantitative analysis, ASTM International, West Conshohocken (PA), 2023.
74. Ren, F., J. Mo, Q. Wang, and J. C. M. Ho. Crumb rubber as partial replacement for fine aggregate in concrete: an overview. Construction and Building Materials, Vol. 343, 2022, id. 128049.10.1016/j.conbuildmat.2022.128049 ↗
75. Hamada, H. M., F. Abed, H. Y. B. Katman, A. M. Humada, M. S. Al Jawahery, A. Majdi, et al. Effect of silica fume on the properties of sustainable cement concrete. Journal of Materials Research and Technology, Vol. 24, 2023, pp. 8887–8908.10.1016/j.jmrt.2023.05.147 ↗
76. Poole, A. B. and I. Sims. Concrete petrography: A handbook of investigative techniques, 2nd ed., CRC Press, Taylor & Francis Group, Boca Raton (FL), 2016.
77. Siddique, R and A. S. Sidhu. Crumb rubber in sustainable self-compacting concrete. Sustainable concrete materials and structures, Ashour, A., X. Wang, and B. Han, eds., Woodhead Publishing, Cambridge, 2024, pp. 193–238. (Woodhead Publishing Series in Civil and Structural Engineering) 5.10.1016/B978-0-443-15672-4.00008-5 ↗
78. Sidhu, A. S. and R. Siddique. Utilisation of crumb tire rubber in development of sustainable metakaolin-based high strength concrete. Construction and Building Materials, Vol. 345, 2022, id. 128412.10.1016/j.conbuildmat.2022.128412 ↗
79. Elbialy, S., W. Ibrahim, S. Mahmoud, N. M. Ayash, and H. Mamdouh. Mechanical characteristics and structural performance of rubberized concrete: Experimental and analytical analysis. Case Studies in Construction Materials, Vol. 21, 2024, id. e03727.10.1016/j.cscm.2024.e03727 ↗
80. Wang, H., Y. Wu, and B. Cheng. Mechanical properties of alkali-activated concrete containing crumb rubber particles. Case Studies in Construction Materials, Vol. 16, 2022, id. e00803.10.1016/j.cscm.2021.e00803 ↗
81. Meng, L., C. Zhang, J. Wei, L. Li, J. Liu, S. Wang, et al. Mechanical properties and microstructure of ultra-high strength concrete with lightweight aggregate. Case Studies in Construction Materials, Vol. 18, 2023, id. e01745.10.1016/j.cscm.2022.e01745 ↗
82. Mindess, S., J. F. Young, and D. Darwin. Concrete, 2nd edn., Prentice Hall, Pearson Education, Inc, Upper Saddle River (NJ), 2003.
83. Siddika, A., M. A. A. Mamun, R. Alyousef, Y. H. M. Amran, F. Aslani, and H. Alabduljabbar. Properties and utilizations of waste tire rubber in concrete: A review. Construction and Building Materials, Vol. 224, 2019, pp. 711–731.10.1016/j.conbuildmat.2019.07.108 ↗
84. Munir, M. J., S. M. S. Kazmi, and Y. F. Wu. Efficiency of waste marble powder in controlling alkali silica reaction of concrete: A sustainable approach. Construction and Building Materials, Vol. 154, 2017, pp. 590–599.10.1016/j.conbuildmat.2017.08.002 ↗
85. Elahi, M. M. A., C. R. Shearer, A. N. R. Reza, A. K. Saha, M. N. N. Khan, M. M. Hossain, et al. Improving the sulfate attack resistance of concrete by using supplementary cementitious materials (SCMs): A review. Construction and Building Materials, Vol. 281, 2021, id. 122628.10.1016/j.conbuildmat.2021.122628 ↗
86. Kantasiri, T., P. Kasemsiri, U. Pongsa, P. Posi, and P. Chindaprasirt. Optimization of concrete containing waste crumb rubber mix design for thermal insulating applications using Taguchi method. Construction and Building Materials, Vol. 434, 2024, id. 136636.10.1016/j.conbuildmat.2024.136636 ↗
87. Shadfar, A., M. Nani, and R. Shirinabadi. The feasibility of constructing rubber concrete pavement reinforced with recycled and industrial steel fibers. Results in Materials, Vol. 25, 2025, id. 100657.10.1016/j.rinma.2025.100657 ↗
88. Dadsetan, S. and J. Bai. Mechanical and microstructural properties of self-compacting concrete blended with metakaolin, ground granulated blast-furnace slag and fly ash. Construction and Building Materials, Vol. 146, 2017, pp. 658–667.10.1016/j.conbuildmat.2017.04.158 ↗
89. Kunther, W., S. Ferreiro, and J. Skibsted. Influence of the Ca/Si ratio on the compressive strength of cementitious calcium-silicate-hydrate binders. Journal of Materials Chemistry A: Materials for Energy and Sustainability, Vol. 5, 2017, pp. 17401–17412.10.1039/C7TA06104H ↗