Review of the development and application of aluminum alloys in the nuclear industry
Source abstract
Abstract
Abstract The necessity for lightweight components in the nuclear sector is driven by the requirement to minimize the total weight of the fuel. Aluminum alloys have emerged as the primary choice for incorporation into the nuclear fuel structure of research reactors, primarily serving as a cladding material for the containment of uranium fuel. Their utilization is driven by their ability to fulfill the prerequisite of having a lower relative density than other metals, thereby contributing to a reduction in the total weight of the fuel. Furthermore, they demonstrate superior mechanical properties, thermal characteristics, and corrosion resistance. Aluminum alloys, such as AlFeNi and Al 6061 (AlMgSi), showcase commendable mechanical attributes, thermal behavior, and stability, being amenable to strengthening through specific heat treatments, consequently demonstrating favorable performance as cladding materials in nuclear applications and thereby extending the lifespan of the fuel. Additionally, aluminum alloys have a very small neutron absorption cross-section, so neutron absorption is relatively low, and more neutrons will be transmitted to the fuel. This study presents a literature review on aluminum alloys from various experiments for use in the nuclear industry, detailing their production methods, and elucidating their influence on mechanical properties, thermal behavior, and stability, focusing on recent research findings. Furthermore, this review outlines existing challenges and offers a comprehensive roadmap for prospective research. The strength of the cladding material should be increased to encase high-density fuel, which will impact the fuel’s lifespan, thereby making it more economically efficient.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Graphite, nuclear technology, radiation studies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Center for Nuclear Fuel and Radioactive Waste Technology, National Research and Innovation Agency , Tangerang Selatan , Indonesia
Department of Physics, Universitas Indonesia , Depok , Indonesia
Research Center for Advanced Material, National Research and Innovation Agency , Tangerang Selatan , Indonesia
Research Center for Environmental and Clean Technology, National Research and Innovation Agency , Tangerang Selatan , Indonesia
References (71)
Show source-provided references
1. Georgantzia, E., M. Gkantou, and G. S. Kamaris. Aluminium alloys as structural material: A review of research. Engineering Structures, Vol. 227, 2021, id. 111372.10.1016/j.engstruct.2020.111372 ↗
2. You, X., Z. Xing, S. Jiang, Y. Zhu, Y. Lin, H. Qiu, et al. A review of research on aluminum alloy materials in structural engineering. Developments in the Built Environment, Vol. 17, 2024, id. 100319.10.1016/j.dibe.2023.100319 ↗
3. Atxaga, G., A. Arroyo, and B. Canflanca. Hot stamping of aerospace aluminium alloys: Automotive technologies for the aeronautics industry. Journal of Manufacturing Processes, Vol. 81, 2022, pp. 817–827.10.1016/j.jmapro.2022.07.032 ↗
4. Zhu, H. and J. Li. Advancements in corrosion protection for aerospace aluminum alloys through surface treatment. International Journal of Electrochemical Science, Vol. 19, 2024, id. 100487.10.1016/j.ijoes.2024.100487 ↗
5. Rolseth, A., M. Carlson, E. Ghassemali, L. Pérez Caro, and A. E. W. Jarfors. Impact of functional integration and electrification on aluminium scrap in the automotive sector: A review. Resources, Conservation and Recycling, Vol. 205, 2024, id. 107532.10.1016/j.resconrec.2024.107532 ↗
6. Kim, Y. S., H. T. Chae, S. Van den Berghe, A. Leenaers, V. Kuzminov, and A. M. Yacout. Aluminum cladding oxide growth prediction for high flux research reactors. Journal of Nuclear Materials, Vol. 529, 2020, id. 151926.10.1016/j.jnucmat.2019.151926 ↗
7. Mei, H., D. Yu, S. Ma, J. Zhang, Y. Sun, C. Chen, et al. Conceptual design for a 5 kWe space nuclear reactor power system. Nuclear Engineering and Technology, Vol. 56, 2024, pp. 3644–3653.10.1016/j.net.2024.04.015 ↗
8. Magalhães, I. R., L. V. G. Chaves, V. F. de Castro, P. A. L. Reis, A. L. Costa, M. A. F. Veloso, et al. Comparative analysis of different FeCrAl alloys in pressurized water reactors. Nuclear Engineering and Design, Vol. 422, 2024, id. 113109.10.1016/j.nucengdes.2024.113109 ↗
9. Li, S. S., X. Yue, Q. Y. Li, H. L. Peng, B. X. Dong, T. S. Liu, et al. Development and applications of aluminum alloys for aerospace industry. Journal of Materials Research and Technology, Vol. 27, 2023, pp. 944–983.10.1016/j.jmrt.2023.09.274 ↗
10. Zhang, P., Z. Liu, J. Liu, J. Yu, Q. Mai, and X. Yue. Effect of aging plus cryogenic treatment on the machinability of 7075 aluminum alloy. Vacuum, Vol. 208, 2023, id. 111692.10.1016/j.vacuum.2022.111692 ↗
11. Milagre, M. X., M. S. Pereira, A. A. Gomes, M. Scapin, M. Franco, F. Yokaichiya, et al. Corrosion characterization of the 6061 Al–Mg–Si alloy in synthetic acid rain using neutron tomography. Applied Radiation and Isotopes, Vol. 184, 2022, id. 110197.10.1016/j.apradiso.2022.110197 ↗
12. Chuirazzi, W., N. L. Cordes, J. F. Jue, M. Johnson, J. Cole, and J. Giglio. Micro X-ray computed tomography examination of mini plate fuel with hot isostatic pressed aluminum cladding. Materials Today Communications, Vol. 37, 2023, id. 107345.10.1016/j.mtcomm.2023.107345 ↗
13. Zobaer Shah, Q. M., M. A. Chowdhury, and M. A. Kowser. The aspect of the corrosion pitting with fretting fatigue on aluminum alloy: An aerospace structural failure or a nuclear safety phenomenon. Results in Engineering, Vol. 15, 2022, id. 100483.10.1016/j.rineng.2022.100483 ↗
14. Milagre, M. X., U. Donatus, R. M. P. Silva, A. M. Betancor-Abreu, O. M. P. Ramirez, C. S. C. Machado, et al. Galvanic coupling effects on the corrosion behavior of the 6061 aluminum alloy used in research nuclear reactors. Journal of Nuclear Materials, Vol. 541, 2020, id. 152440.10.1016/j.jnucmat.2020.152440 ↗
15. Alikulov, S.hA., F. R. Akhmedzhanov, S. A. Baitelesov, et al. High-temperature electric and thermal conductivity of the aluminum alloys. Atomic Energy, Vol. 117, 2015, pp. 334–339.10.1007/s10512-015-9930-8 ↗
16. Al Hasa, M. H., W. Ariadi, M. Masrukan, K. M. Alhasa, U. Sudjadi, R. Langenati, et al. Structural analysis and characteristics of deformed and heat-treated Al-Fe-Ni-Mg. International Journal on Advanced Science, Engineering and Information Technology, Vol. 14, 2024, pp. 1263–1270.10.18517/ijaseit.14.4.19507 ↗
17. Eidelpes, E., J. J. Jarrell, T. E. Lister, G. P. Horne, E. H. Parker-Quaife, J. K. Conrad, et al. Technical basis for extended dry storage of aluminum-clad spent nuclear fuel. Journal of Nuclear Materials, Vol. 577, 2023, id. 154299.10.1016/j.jnucmat.2023.154299 ↗
18. AlMisned, G., N. Yayla, M. G. AlBayrak, O. Guler, D. S. Baykal, and H. O. Tekin. Innovative Al6061-gadolinium oxide ods alloys, fabrication. Applied Physics A, Vol. 940, 2024, pp. 1–19.
19. Ma, B. M. Nuclear reactor materials and application, VNR Company Inc, USA, 1983.
20. Science Direct. Atomic Collision.
21. Sun, Y. The use of aluminum alloys in structures: Review and outlook. Structures, Vol. 57, 2023, id. 105290.10.1016/j.istruc.2023.105290 ↗
22. Wang, Z., M. Li, Q. Han, X. Yun, K. Zhou, L. Gardner, et al. Structural fire behaviour of aluminium alloy structures: Review and outlook. Engineering Structures, Vol. 268, 2022, id. 114746.10.1016/j.engstruct.2022.114746 ↗
23. The possibility of utilizing novel cladding materials instead of zirconium in.
24. Wouters, Y. and L. L.-R. Corrosion in pressurized water. Encyclopedia of interfacial chemistry, 2018, pp. 155–163.10.1016/B978-0-12-409547-2.13875-2 ↗
25. Zhao, H., L. Duan, G. Chen, H. Fan, J. Wang, and C. Zhou. High corrosion resistance performance of 304 stainless steel after liquid nitrocarburization. Composites Part B: Engineering, Vol. 155, 2018, pp. 173–177.10.1016/j.compositesb.2018.07.062 ↗
26. Usui, T., A. Sawada, M. Amaya, A. Suzuki, T. Chikada, and T. Terai. SiC coating as hydrogen permeation reduction and oxidation resistance for nuclear fuel cladding. Journal of Nuclear Science and Technology, Vol. 52, 2015, pp. 1318–1322.10.1080/00223131.2015.1020901 ↗
27. Ge, Z., S. Tan, Y. Li, L. Bao, X. Feng, T. Liu, et al. Thermal corrosion behavior of Inconel 693, Hastelloy N and 310S in ceramic waste forming reactions. Journal of Nuclear Materials, Vol. 603, 2025, pp. 1–15.10.1016/j.jnucmat.2024.155416 ↗
28. Corrosion behavior of Hastelloy alloys and stainless steel.
29. Zhou, L., J. Dai, Y. Li, X. Dai, C. Xie, L. Li, et al. Research progress of steels for nuclear reactor pressure vessels. Materials, Vol. 15, 2022, id. 15248761.10.3390/ma15248761 ↗
30. Slugeň, V., S. Sojak, W. Egger, V. Krsjak, J. Simeg Veternikova, and M. Petriska. Radiation damage of reactor pressure vessel steels studied by positron annihilation spectroscopy—a review. Metals, Vol. 10, 2020, id. 10101378.10.3390/met10101378 ↗
31. Khalid, M. Y., R. Umer, and K. A. Khan. Review of recent trends and developments in aluminium 7075 alloy and its metal matrix composites (MMCs) for aircraft applications. Results in Engineering, Vol. 20, 2023, id. 101372.10.1016/j.rineng.2023.101372 ↗
32. Surdia, T. and S. Saitu. Pengetahuan Bahan Teknik, PT. Dainipon Gitakarya Printing, Jakarta, 1985.
33. Altenpuhl, D. Aluminum viewed from within, Springer Verlag, Dussldorf-FRG, 1982.
34. Woolstenhulme, N. E., A. B. Robinson, J. W. Nielsen, Y. J. Choi, T. A. Johnson, J. S. Yim, et al. Irradiation performance of a U-7Mo in Al-Si matrix dispersion full-size fuel plate assembly. Nuclear Engineering and Design, Vol. 416, 2024, id. 112761.10.1016/j.nucengdes.2023.112761 ↗
35. Kim, H. J., J. S. Yim, B. H. Lee, J. Y. OH, and Y. W. Tahk. Drop impact analysis of plate-type fuel assembly in research reactor. Nuclear Engineering and Technology, Vol. 46, 2014, pp. 529–540.10.5516/NET.09.2013.103 ↗
36. Kim, H. J., J. S. Yim, Y. W. Tahk, J. Y. Oh, and E. H. Kong. Drop behaviors of a plate-type fuel assembly used in research reactor for a drop accident. Progress in Nuclear Energy, Vol. 113, 2019, pp. 255–262.10.1016/j.pnucene.2019.01.020 ↗
37. Yang, B., Y. Wang, M. Gao, C. Wang, and R. Guan. Microstructural evolution and strengthening mechanism of Al–Mg alloys with fine grains processed by accumulative continuous extrusion forming. Journal of Materials Science & Technology (Shenyang, China), Vol. 128, 2022, pp. 195–204.10.1016/j.jmst.2022.03.032 ↗
38. Siswosuwarno, M. Teknik Pembentukan Logam, Institut Teknologi Bandung, Bandung, 1985.
39. Dieter, G. E. Mechanical metallurgy, 2nd edn, McGraw-Hill, Newyork, 1981.
40. Song, C. R., B. X. Dong, S. Y. Zhang, H. Y. Yang, L. Liu, J. Kang, et al. Recent progress of Al–Mg alloys: Forming and preparation process, microstructure manipulation and application. Journal of Materials Research and Technology, Vol. 31, 2024, pp. 3255–3286.10.1016/j.jmrt.2024.07.051 ↗
41. Polmer, I. J. Light alloys, metalurgy of the light metal, John Willey, London, 1981.
42. METAL ASM. Metal handbook, metallography, structures and phass diagrams, 8th edn, Amercan society for Metals, American, 1973.
43. Gentry, C., V. Seker, B. J. Ade, et al. Development and performance simulations of the MPACT-AGREE code coupling interface for MAGNOX reactors. In Proceedings of the International Conference on Mathematics and Computational Methods Applied to Nuclear Science and Engineering, M and C 2021, 2021. Epub ahead of print 2021.10.13182/xyz-33795 ↗
44. Ade, B. J., N. P. Luciano, A. J. Conant, C. A. Gentry, S. G. Stimpson, B. S. Collins, et al. Development of MPACT for full-core simulations of MAGNOX gas-cooled nuclear reactors. In International Conference on Physics of Reactors: Transition to a Scalable Nuclear Future, PHYSOR 2020, 2020. Epub ahead of print 2020.10.1051/epjconf/202124706041 ↗
45. Naronikar, A. H., H. N. A. Jamadagni, A. Simha, and B. Saikiran. Optimizing the heat treatment parameters of Al-6061 required for better formability. 2018. www.sciencedirect.comwww.materialstoday.com/proceedings2214-7853.10.1016/j.matpr.2018.10.219 ↗
46. Lu, R., S. Zheng, J. Teng, J. Hu, D. Fu, J. Chen, et al. Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach. Journal of Materials Science & Technology (Shenyang, China), Vol. 80, 2021, pp. 150–162.10.1016/j.jmst.2020.11.055 ↗
47. Chen, Z., R. Lu, S. Zheng, J. Tang, F. Jiang, L. Deng, et al. Microstructural characteristics and deformation behaviors of an Al-Mg-Si alloy with improved strength and conductivity processed by continuous casting and expansion extrusion. Journal of Materials Research and Technology, Vol. 22, 2023, pp. 445–460.10.1016/j.jmrt.2022.11.156 ↗
48. Tang, K., S. Liu, J. Wang, H. Huang, L. Wei, H. Jiang, et al. Localized corrosion characteristics of Al-Mg-Si aluminum alloy with aging time and pre-delayed aging condition. Journal of Alloys and Compounds, Vol. 990, 2024, id. 174469.10.1016/j.jallcom.2024.174469 ↗
49. Milagre, M. X., U. Donatus, N. V. Mogili, C. S. C. Machado, J. V. S. Araujo, R. E. Klumpp, et al. Effects of picture frame technique (PFT) on the corrosion behavior of 6061 aluminum alloy. Journal of Nuclear Materials, Vol. 539, 2020, id. 152320.10.1016/j.jnucmat.2020.152320 ↗
50. Li, W., F. Qian, J. Li, Y. Zhu, Y. Liang, S. Xu, et al. Design strategy for eliminating cracking and improving mechanical properties of Al-Mg-Si alloys fabricated by laser melting deposition. Additive Manufacturing, Vol. 68, 2023, id. 103513.10.1016/j.addma.2023.103513 ↗
51. ASM METAL. Metal Hndboks, Atlas of microstructures of industrial alloys. 8th Edition. American: American society for metals, 1973.
52. Hatch, J. E. Aluminum, properties and physical metallurgy, American Society for Metal, Ohio, 1988.
53. Bian, Z., Y. Liu, S. Dai, Z. Chen, M. Wang, D. Chen, et al. Regulating microstructures and mechanical properties of Al–Fe–Ni alloys. Progress in Natural Science: Materials International, Vol. 30, 2020, pp. 54–62.10.1016/j.pnsc.2019.12.006 ↗
54. Wang, W., N. Takata, A. Suzuki, M. Kobashi, and M. Kato. Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion. Intermetallics (Barking), Vol. 125, 2020, id. 106892.10.1016/j.intermet.2020.106892 ↗
55. Bian, Z. Y., A. L. Zhu, Y. K. Xiao, Y. G. Li, N. H. Ma, H. B. Bian, et al. Coupling analysis on controlling mechanisms for creep of Al-Fe-Ni alloy. Transactions of Nonferrous Metals Society of China (English Edition), Vol. 33, 2023, pp. 1331–1344.10.1016/S1003-6326(23)66186-2 ↗
56. Ding, H., Y. Xiao, Z. Bian, Y. Wu, H. Yang, Y. Li, et al. Effect of in-situ TiB2 particles on microstructure and mechanical properties of Al–Fe–Ni manufactured by selective laser melting. Materials Science and Engineering: A, Vol. 845, 2022, id. 143065.10.1016/j.msea.2022.143065 ↗
57. Loginova, I. S., M. V. Sazerat, P. A. Loginov, A. V. Pozdniakov, N. A. Popov, and A. N. Solonin. Evaluation of microstructure and hardness of novel Al-Fe-Ni alloys with high thermal stability for laser additive manufacturing. JOM, Vol. 72, 2020, pp. 3744–3752.10.1007/s11837-020-04321-2 ↗
58. Lippmann, S., R. H. Kemsies, M. Schick, B. Milkereit, O. Kessler, M. Rettenmayr, et al. Synthesis of pure intermetallic phases on the example of the ternary phase τ1 in the system Al-Fe-Ni. Intermetallics (Barking), Vol. 105, 2019, pp. 107–112.10.1016/j.intermet.2018.11.016 ↗
59. Raynor, G. V. and G. V. Rivlin. Phase equilibria in iron ternary alloys, The Institute of Metals, London, 1988.
60. Mondolfo, L. F. Aluminum alloys, structure and properties, Butterworth-Heinemann, London-Boston, 1976, pp. 282–566.10.1016/B978-0-408-70932-3.50283-7 ↗
61. Ding, H., Y. Xiao, Z. Bian, Y. Wu, H. Yang, H. Wang, et al. Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting. Journal of Alloys and Compounds, Vol. 885, 2021, id. 160949.10.1016/j.jallcom.2021.160949 ↗
62. Bian, Z., S. Dai, L. Wu, Z. Chen, M. Wang, D. Chen, et al. Thermal stability of Al-Fe-Ni alloy at high temperatures. Journal of Materials Research and Technology, Vol. 8, 2019, pp. 2538–2548.10.1016/j.jmrt.2019.01.028 ↗
63. Czerwinski, F. Thermal stability of aluminum alloys. Materials, Vol. 13, 2020, id. 13153441.10.3390/ma13153441 ↗
64. ASM I. Ternary alloy AlFeNi, Vol, ASM, International, Germany, 1992.
65. Zhou, H. and Z. Zhang. Evolution of silicon particle damage on fatigue crack initiation and early propagation in an aluminum alloy. Rare Metals, Vol. 42, 2023, pp. 2470–2476.10.1007/s12598-017-0930-9 ↗
66. Qin, L., P. Tang, and S. Meng. Effect of Ni addition on the microstructure, conductivities and mechanical properties of as-cast Al-Fe alloys. Journal of Alloys and Compounds, Vol. 986, 2024, id. 174160.10.1016/j.jallcom.2024.174160 ↗
67. Tang, P., S. Lu, H. Chen, F. Mo, and J. Li. Effect of cerium addition on microstructure, thermal and rheological properties of hypoeutectic Al-Ni alloy. Materials Today Communications, Vol. 36, 2023, id. 106842.10.1016/j.mtcomm.2023.106842 ↗
68. Jiang, M., L. Mo, X. Zhou, X. Liu, M. Zhan, and J. Du. Microstructure evolution and thermophysical properties of hypereutectic Al-Fe-Ni alloys. International Journal of Metalcasting, Vol. 17, 2023, pp. 2780–2793.10.1007/s40962-023-00957-3 ↗
69. Lin, M., L. Mo, X. Zhou, M. Zhan, and J. Du. Regulation on microstructures and properties of hypereutectic Al–3.5Fe–2.5Ni alloy by controlled diffusion solidification. International Journal of Metalcasting, Vol. 19, 2024, pp. 293–306.10.1007/s40962-024-01281-0 ↗
70. AlMisned, G., D. S. Baykal, H. Alkarrani, Ö. Güler, G. Kilic, A. Mesbahi, et al. On β-titanium alloys: Tailoring gamma-ray, and neutron transmission properties for nuclear and biomedical applications. Metallurgical Research & Technology, Vol. 121, 2024, pp. 1–19.10.1051/metal/2024062 ↗
71. Say, Y., Ö. Güler, E. Kavaz, G. ALMisned, A. Ene, and H. O. Tekin. Structural, physical, and radiation absorption properties of a significant nuclear power plant component: A comparison between REX-734 and 316L SS austenitic stainless steels. Open Chemistry, Vol. 21, 2023, id. 20220307.10.1515/chem-2022-0307 ↗