journal article·2022-04-28Open access

Mechanical behavior and mechanism investigation on the optimized and novel bio-inspired nonpneumatic composite tires

Bing Liu, Xianghong Xu

Abstract

Abstract Two novel nonpneumatic tires named Tweel-2, designed based on the commercial Tweel model, and Saddle with hyperbolic paraboloid spokes are proposed in this study. Four nonpneumatic tire samples were successfully prepared with the 3D printing technology to measure and analyze and compare their properties. The results of quasi-static compression experiments showed that with the same relative density, the vertical bearing capacity of Tweel-2 tire was 1.4 times that of Tweel tire, while the vertical bearing capacity of the saddle tire was 4 times and 2.4 times that of Tweel and honeycomb tires, respectively. The finite element simulation method was used to explore the mechanism of improvement in vertical bearing capacity and energy absorption of the Tweel-2 and saddle design. The so-called circumferential unit in Tweel-2 and honeycomb tires enhances the deformation coordination between the spokes of Tweel-2 and increases the critical bearing capacity of the spokes by shortening the length of the deformation zone, so that more external work can be consumed under the same vertical deformation. The spatial configuration of the hyperbolic paraboloid can optimize the spatial stress distribution of the saddle tire and makes sure that a bigger amount of material deforms and participates in energy absorption, thus improving the overall strain energy level of the spokes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Soil Mechanics and Vehicle Dynamics · Robotic Locomotion and Control · Mechanical Engineering and Vibrations Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The State Key Laboratory of Nonlinear Mechanics (LNM), Institute of Mechanics, Chinese Academy of Sciences , Beijing , 100190 , China

School of Engineering Sciences, University of Chinese Academy of Sciences , Beijing , 100049 , China

References (38)

Show source-provided references
1. Jin, X., C. Hou, X. Fan, Y. Sun, J. Lv, and C. Lu. Investigation on the static and dynamic behaviors of non-pneumatic tires with honeycomb spokes. Composite Structures, Vol. 187, 2018, pp. 27–35.10.1016/j.compstruct.2017.12.044 ↗
2. Baranowski, P., J. Malachowski, and L. Mazurkiewicz. Numerical and experimental testing of vehicle tyre under impulse loading conditions. International Journal of Mechanical Sciences, Vol. 106, 2016, pp. 346–356.10.1016/j.ijmecsci.2015.12.028 ↗
3. Gent, A. N. and J. D. Walter. The Pneumatic Tire; National Highway Traffic Safety Administration, Washington, D.C, U.S., U.S. Department of Transportation, 2006.
4. Ju, J., D.-M. Kim, and K. Kim. Flexible cellular solid spokes of a non-pneumatic tire. Composite Structures, Vol. 94, 2012, pp. 2285–2295.10.1016/j.compstruct.2011.12.022 ↗
5. Ju, J., B. Ananthasayanam, J. D. Summers, and P. Joseph. Design of cellular shear bands of a non-pneumatic tire – investigation of contact pressure. SAE International Journal of Passenger Cars - Mechanical Systems, Vol. 3, 2010, pp. 598–606.10.4271/2010-01-0768 ↗
6. Wu, T., M. Li, X. Zhu, and X. Lu. Research on non-pneumatic tire with gradient anti-tetrachiral structures. Mechanics of Advanced Materials and Structures, Vol. 28, No. 22, 2021, pp. 2351–2359.10.1080/15376494.2020.1734888 ↗
7. Lu, H. B., F. Liang, and J. H. Gou. Nanopaper enabled shape-memory nanocomposite with vertically aligned nickel nanostrand: controlled synthesis and electrical actuation. Soft Matter, Vol. 7, No. 16, 2011, pp. 7416–7423.10.1039/c1sm05765k ↗
8. Kim, K. and D. M. Kim. Contact pressure of non-pneumatic tires with hexagonal lattice spokes. SAE 2011 World Congress and Exhibition, 2011. 10.4271/2011-01-0099.10.4271/2011-01-0099 ↗
9. Rugsaj, R. and C. Suvanjumrat. Proper radial spokes of non-pneumatic tire for vertical load supporting by finite element analysis. International Journal of Automotive Technology, Vol. 20, 2019, pp. 801–812.10.1007/s12239-019-0075-y ↗
10. Rugsaj, R. and C. Suvanjumrat. Study of geometric effects on nonpneumatic tire spoke structures using finite element method. Mechanics Based Design of Structures and Machines, 2020, pp. 1–21. 10.1080/15397734.2020.1777875.10.1080/15397734.2020.1777875 ↗
11. Ganniari-Papageorgiou, E., P. Chatzistergos, and X. Wang. The influence of the honeycomb design parameters on the mechanical behavior of non-pneumatic tires. International Journal of Applied Mechanics, Vol. 12, 2020, id. 2050024.10.1142/S1758825120500246 ↗
12. Li, Y., X. Sun, J. Song, S. Zhang, and S. Han. Topological structure and experimental investigation of a novel whole tire bead. Materials & Design, Vol. 203, 2021, id. 109592.10.1016/j.matdes.2021.109592 ↗
13. Zhang, Q., X. Yang, P. Li, G. Huang, S. Feng, C. Shen, et al. Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation. Progress in Materials Science, Vol. 74, 2015, pp. 332–400.10.1016/j.pmatsci.2015.05.001 ↗
14. Xue, R., X. Cui, P. Zhang, K. Liu, Y. Li, W. Wu, et al. Mechanical design and energy absorption performances of novel dual scale hybrid plate-lattice mechanical metamaterials. Extreme Mechanics Letters, Vol. 40, 2020, id. 100918.10.1016/j.eml.2020.100918 ↗
15. Li, X., F. Lu, Y. Zhang, Y. Lin, and Y. Meng. Experimental study on out-of-plane mechanical and energy absorption properties of combined hexagonal aluminum honeycombs under dynamic impact. Materials & Design, Vol. 194, 2020, id. 108900.10.1016/j.matdes.2020.108900 ↗
16. Heo, H., J. Ju, and D.-M. Kim. Compliant cellular structures: application to a passive morphing airfoil. Composite Structures, Vol. 106, 2013, pp. 560–569.10.1016/j.compstruct.2013.07.013 ↗
17. Lu, H. B. and W. M. Huang. On the origin of the Vogel-Fulcher-Tammann law in the thermo-responsive shape memory effect of amorphous polymers. Smart Materials and Structures, Vol. 22, No. 10, 2013, id. 105021.10.1088/0964-1726/22/10/105021 ↗
18. Lu, H. B. and S. Y. Du. A phenomenological thermodynamic model for the chemo-responsive shape memory effect in polymers based on Flory-Huggins solution theory. Polymer Chemistry-UK, Vol. 5, No. 4, 2014, pp. 1155–1162.10.1039/C3PY01256E ↗
19. Kim, K., J. Ju, and D. M. Kim. Static contact behaviors of a non-pneumatic tire with hexagonal lattice spokes. SAE International Journal of Passenger Cars - Mechanical Systems, Vol. 6, 2013, pp. 1518–1527.10.4271/2013-01-9117 ↗
20. Zang, L., X. Wang, P. Yan, and Z. Zhao. Structural design and characteristics of a non-pneumatic tire with honeycomb structure. Mechanics of Advanced Materials and Structures, 2021, pp. 1–8. 10.1080/15376494.2021.1919800.10.1080/15376494.2021.1919800 ↗
21. Jang, I. G., Y. H. Sung, E. J. Yoo, and B. M. Kwak. Pattern design of a non-pneumatic tyre for stiffness using topology optimization. Engineering Optimization, Vol. 44, 2012, pp. 119–131.10.1080/0305215X.2011.569546 ↗
22. Kucewicz, M., P. Baranowski, and J. Malachowski. Airless tire conceptions modeling and simulations. Preceedings of the 13th International Scientific Conference: Computer Aided Engineering, Polanica Zdroj, Poland, June 22–25, 2016, pp. 293–301.10.1007/978-3-319-50938-9_30 ↗
23. Aboul-Yazid, A., M. Emam, S. Shaaban, and M. El-Nashar. Effect of spokes structures on characteristics performance of non-pneumatic tires. International Journal of Automotive and Mechanical Engineering, Vol. 11, 2015, pp. 2212–2223.10.15282/ijame.11.2015.4.0185 ↗
24. Zhang, Z., H. Fu, X. Liang, X. Chen, and D. Tan. Comparative analysis of static and dynamic performance of non-pneumatic tire with flexible spoke. Structure, Vol. 66, 2020, pp. 458–466.10.5545/sv-jme.2020.6676 ↗
25. URL: https://www.michelin.com.cn/ (JULY 10, 2021).
26. URL: https://www.bridgestone.com/technology_innovation/air_free_concept/ (JULY 10, 2021).
27. Patek, S. N., W. Korff, and R. L. Caldwell. Deadly strike mechanism of a mantis shrimp – This shrimp packs a punch powerful enough to smash its prey’s shell underwater. Nature, Vol. 428, 2004, pp. 819–820.10.1038/428819a ↗
28. Devries, M. S., E. A. K. Murphy, and S. N. Patek. Strike mechanics of an ambush predator: The spearing mantis shrimp. Journal of Experimental Biology, Vol. 215, 2012, pp. 4374–4384.10.1242/jeb.075317 ↗
29. Tadayon, M., S. Amini, A. Masic, and A. Miserez. The mantis shrimp saddle: a biological spring combining stiffness and flexibility. Advanced Functional Materials, Vol. 25, 2015, pp. 6437–6447.10.1002/adfm.201502987 ↗
30. Tadayon, M., S. Amini, Z. Wang, and A. Miserez. Biomechanical design of the mantis shrimp saddle: a biomineralized spring used for rapid raptorial strikes. iScience, Vol. 8, 2018, pp. 271–282.10.1016/j.isci.2018.08.022 ↗
31. Stratasys. Available from: http://www.stratasys.com.
32. Wu, X., X. Meng, and H. Zhang. An experimental investigation of the dynamic fracture behavior of 3D printed nacre-like composites. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 112, 2020, id. 104068.10.1016/j.jmbbm.2020.104068 ↗
33. Sun, X., X. Fang, L. Guan. Mechanics of materials, Higher Education Press, Beijing, China, 2002.
34. Gu, G. X., M. Takaffoli, and M. J. Buehler. Hierarchically enhanced impact resistance of bioinspired composites. Advanced Materials, Vol. 29, 2017, id. 1700060.10.1002/adma.201700060 ↗
35. Milosevic, N., B. Younise, A. Sedmak, M. Travica, and A. Mitrovic. Evaluation of true stress–strain diagrams for welded joints by application of digital image correlation. Engineering failure analysis, Vol. 128, 2021, id. 105609.10.1016/j.engfailanal.2021.105609 ↗
36. Gu, G. X., S. Wettermark, and M. J. Buehler. Algorithm-driven design of fracture resistant composite materials realized through additive manufacturing. Additive manufacturing, Vol. 17, 2017, pp. 47–54.10.1016/j.addma.2017.07.002 ↗
37. Mendelson, A. Plasticity: Theory and application, The Macmillan, New York, NY, USA, 1968.
38. Gibson, L. J. and M. F. Ashby. Cellular solids: Structure and properties, Cambridge University Press, Cambridge, 1999.