A review on filler materials for brazing of carbon-carbon composites
Source abstract
Abstract
Abstract It is needed to join C/C composite to other materials since its individual use is limited. Brazing is a method to join C/C composite that has been studied most, maturest and most widely used in recent decades. The quality of a brazed joint is largely determined by the intermediate layer material. It is significant to choose filler materials reasonably. C/C composite is difficult to be wetted by common brazing filler materials. Moreover, there is a large difference in the coefficient of thermal expansion between C/C composite and metals. At present, there is no brazing filler alloy exclusively recommended for commercial C/C composites and metal brazing. Usually, active elements are added into filler metals to improve the wettability of them on C/C composite surface. The existing research includes Al-based, Ag-based, Cu-based, Ti-based, Ni-based brazing filler metals, and so on. In addition, various particle reinforced composite filler materials and stress buffer metal interlayer added composite filler materials have been studied for brazing C/C composite. The summarization of the overview on the application of intermediate filler metals is made in this paper. The basic reference basis is provided for the subsequent brazing filler metals development and joint performance improvement for C/C composite brazing.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering , Tsinghua University , Haidian District , Beijing , , China ; State Key Laboratory of Advanced Brazing Filler Metals & Technology, Zhengzhou Research Institute of Mechanical Engineering Co., LTD , No.149 Kexue Avenue, Hi-tech Industries Development Zone , Zhengzhou , , China
Department of Mechanical Engineering , Tsinghua University , Haidian District , Beijing , , China
State Key Laboratory of Advanced Brazing Filler Metals & Technology , Zhengzhou Research Institute of Mechanical Engineering Co., LTD , No.149 Kexue Avenue, Hi-tech Industries Development Zone , Zhengzhou , , China
State Key Laboratory of Advanced Welding and Joining , Harbin Institute of Technology , Harbin , China
China Railway Engineering Equipment Group Co., Ltd. , Zhengzhou , China
Institute of Manufacturing Engineering , Huaqiao University , Xiamen , , China
Department of Mechanical Engineering , Tsinghua University , Haidian District , Beijing , , China ; State Key Laboratory of Advanced Brazing Filler Metals & Technology , Zhengzhou Research Institute of Mechanical Engineering Co., LTD , No.149 Kexue Avenue, Hi-tech Industries Development Zone , Zhengzhou , , China
References (100+)
Show source-provided references
1. Savage, G. Carbon-Carbon composites. Chpman & Hall, Great Britain, UK, 1993. https://doi.org/10.1007/978-94-011-1586-5.10.1007/978-94-011-1586-5 ↗
2. Fitzer, E. and L. M. Manocha. Carbon reinforcements and carbon/carbon composites. Springer-Verlag, Berlin, Germany, 1998. https://doi.org/10.1007/978-3-642-58745-0.10.1007/978-3-642-58745-0 ↗
3. Li, H. J. Carbon/carbon composites. New Carbon Materials, Vol. 16, 2001, pp. 79–80 (in Chinese).
4. Chen, X. Z., Q. Y. Lu, Z. X. Zheng, W. J. Cai, K. Q. Wang, and Z. Y. Zhang. The connection mode for carbon fiber composite materials. [Natural Science Edition]. Journal of Yangzhou University, Vol. 19, 2016, pp. 33.
5. Sun, T. and J. Y. Zhou. Summary for the connection performance of carbon fiber composite bolt. Modern Manufacturing Engineering, Vol. 09, 2018, pp. 154–160 (in Chinese).
6. Yang, G. Research on high temperature adhesion process and mechanism of carbon materials. Master's thesis, Harbin Institute of Technology, 2014 (In Chinese).
7. Ikeshoji, T. T. Brazing of carbon–carbon (C/C) composites to metals. Advances in brazing science, technology and applications. Woodhead, Cambridge, UK, 2013.10.1533/9780857096500.2.394 ↗
8. Qin, Y. Q. and Z. S. Yu. Joining of C/C composite to TC4 using SiC particle-reinforced brazing alloy. Materials Characterization, Vol. 61, No. 6, 2010, pp. 635–639.10.1016/j.matchar.2010.03.008 ↗
9. Salvo, M., P. Lemoine, M. Ferraris, M. Montorsi, and M. Merola. Joining of carbon-carbon composites for thermonuclear fusion applications. Journal of the American Ceramic Society, Vol. 80, No. 1, 1997, pp. 206–212.10.1111/j.1151-2916.1997.tb02811.x ↗
10. Geng, H. R., H. Li, and G. L. Chen. Microstructure and strength of C/C composites joint with Al based brazing filler metal. Journal of Function Materials, Vol. 39, Supplement, 2008, pp. 362 (in Chinese).
11. Wang, M., X. G. Qi, M. A. Chen, and H. R. Geng. Microstructure and properties of vacuum brazing Cf /C composites using reactive Al based filler metals. Hot Working Technology, Vol. 38, 2009, pp. 180–182 (in Chinese).
12. L. X. Deng. Study on interface microstructure and joining mechanism of C/C composite materials active brazing joints. Master's thesis, Central South University, 2011 (in Chinese).
13. Wu, C. P., D. Q. Yi, C. H. Xu, J. M. Zhou, and Z. Weng. Present research situation and development trend of silver alloys. Electrical Engineering Materials., Vol. 2, 2012, pp. 1 (In Chinese).
14. Cao, X. J., Y. Zhu, W. Guo, P. Peng, and K. T. Ma. Microstructure and Mechanical Properties of C/C composite/TC17 Joints with Ag-Cu-Ti Brazing Alloy. Materials Science and Engineering, Vol. 275, 2017, pp. 12.10.1088/1757-899X/275/1/012040 ↗
15. Liu, S. Y. and Y. C. Shin. Simulation and experimental studies on microstructure evolution of resolidified dendritic TiCx in laser direct deposited Ti-TiC composite. Materials & Design, Vol. 159, 2018, pp. 212–223.10.1016/j.matdes.2018.08.053 ↗
16. Qin, Y. Q., J. C. Feng, and L. X. Zhang. Microstructure and fracture properties of carbon/carbon composite and TC4 titanium alloy joints. Transactions of the China Welding Institution., Vol. 03, 2007, pp. 13–16 (in Chinese).
17. Guo, W., L. Wang, Y. Zhu, and P. K. Chu. Microstructure and mechanical properties of C/C composite/TC4 joint with inactive AgCu filler metal. Ceramics International, Vol. 41, No. 5, 2015, pp. 7021–7027.10.1016/j.ceramint.2015.02.006 ↗
18. Okamura H., S. J. Kajiura, and M. Akiba. Bonding between carbon fiber/carbon composite and copper alloy. Quarterly journal of the Japan Welding Society. Vol. 14, 1996, pp. 39–46 (in Japanese).10.2207/qjjws.14.39 ↗
19. Ma, W. L., W. Mao, X. H. Li, and Y. Y. Cheng. The vacuum brazing of carbon/carbon composite using silver-based active filler metal. Journal of Materials Engineering, Vol. 01, 2002, pp. 9 (in Chinese).
20. Morscher, G. N., M. Singh, T. P. Shpargel, and R. Asthana. A simple test to determine the effectiveness of different braze compositions for joining Ti tubes to C/C composite plates. Materials Science and Engineering A, Vol. 418, No. 1-2, 2006, pp. 19–24.10.1016/j.msea.2005.10.067 ↗
21. Singh, M., G. N. Morscher, T. P. Shpargel, and R. Asthana. Effect of composite substrate properties on the mechanical behavior of brazed joints in metal-composite system. Abstract for 3rd International Brazing and Soldering Conference April 24–26, 2006, TX, San Antonio, USA.
22. Singh, M., T. P. Shpargel, G. N. Morscher, and R. Asthana. Active metal brazing and characterization of brazed joints in titanium to carbon-carbon composites. Materials Science and Engineering A, Vol. 412, No. 1-2, 2005, pp. 123–128.10.1016/j.msea.2005.08.179 ↗
23. Y. Q. Qin. Study on microstructure and mechanical properties of C/C composite and TC4 brazed joint. PhD thesis, Harbin Institute of Technology, 2007 (in Chinese).10.1016/j.msea.2006.11.056 ↗
24. Qin, Y. Q., J. C. Feng, and L. X. Zhang. Microstructure and mechanical properties of carbon/carbon composites and TC4 joints. Rare Metal Materials and Engineering, Vol. 36, 2007, pp. 1210–1214 (in Chinese).
25. Qin, Y. Q. and J. C. Feng. Microstructure and mechanical properties of C/C composite/TC4 joint using AgCuTi filler metal. Materials Science and Engineering A, Vol. 454, 2006, pp. 322–327.10.1016/j.msea.2006.11.056 ↗
26. Singh, M., R. Asthana, and T. P. Shpargel. Brazing of carbon-carbon composites to Cu-clad molybdenum for thermal management applications. Materials Science and Engineering A, Vol. 452–453, 2007, pp. 699–704.10.1016/j.msea.2006.11.031 ↗
27. Singh, M. and R. Asthana. Characterization of brazed joints of C-C composite to Cu-clad-Molybdenum. Composites Science and Technology, Vol. 68, No. 14, 2008, pp. 3010–3019.10.1016/j.compscitech.2008.06.012 ↗
28. Singh, M., G. N. Morscher, T. P. Shpargel, and R. Asthana. Active metal brazing of titanium to high-conductivity carbon-based sandwich structures. Materials Science and Engineering A, Vol. 498, No. 1-2, 2008, pp. 31–36.10.1016/j.msea.2007.11.151 ↗
29. Wang, H. Q., J. Cao, and J. C. Feng. Brazing mechanism and infiltration strengthening of C/C composites to TiAl alloys joint. Scripta Materialia, Vol. 63, No. 8, 2010, pp. 859–862.10.1016/j.scriptamat.2010.06.035 ↗
30. Wang, L., K. K. Wang, W. Guo, Y. Zhu, P. Qu, H. Kang, et al. Research on the brazing of carbon-carbon composite and Ni-based superalloy K24. Proceedings of the 16th national welding academic conference, April, 2011, Jiangsu, China (in Chinese).
31. Ikeshoji, T. T., T. Amanuma, A. Suzumura, and T. Yamazaki. Shear strength of brazed joint between titanium and C/C composites with various cross-ply angles. Journal of Solid Mechanics and Materials Engineering, Vol. 05, No. 12, 2011, pp. 1022–1028.10.1299/jmmp.5.1022 ↗
32. Li, J. K., X. Liu, and J. E. Zhou. Microstructure and mechanical performances of C/C composite and TC4 alloy brazed joints. Key Engineering Materials, Vol. 512–515, 2012, pp. 415–420.10.4028/www.scientific.net/KEM.512-515.415 ↗
33. Guo, W., Y. Zhu, L. Wang, P. Qu, H. Kang, and P. K. Chu. Microstructure evolution and mechanical properties of vacuum-brazed C/C composite with AgCuTi foil. Materials Science and Engineering A, Vol. 564, 2013, pp. 192–198.10.1016/j.msea.2012.11.057 ↗
34. Zhou, X. G., F. Q. Zhang, Q. Yu, and L. H. Xia. Microstructure analyses on joint of carbon/carbon composites and titanium ally using Ag-Cu-Ti as brazing metal. Materials Research and Application, Vol. 7, 2013, pp. 67 (in Chinese).
35. Yang, L. Y., M. Z. Yi, L. P. Ran, Y. C. Ge, and K. Peng. Joining of carbon/carbon composite using AgCuTi braze. Materials Science and Engineering of Powder Metallurgy, Vol. 20, 2015, pp. 765 (in Chinese).
36. Guo, W., T. F. Gao, X. F. Cui, Y. Zhu, and P. K. Chu. Interfacial reactions and zigzag groove strengthening of C/C composite and Rene N5 single crystal brazed joint. Ceramics International, Vol. 41, No. 9, 2015, pp. 11605–11610.10.1016/j.ceramint.2015.05.119 ↗
37. Zhang, K. X., L. H. Xia, F. Q. Zhang, and L. L. He. Active brazing of C/C composite to copper by AgCuTi filler metal. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Vol. 47A, No. 5, 2016, pp. 2162–2176.10.1007/s11661-016-3340-y ↗
38. Gotoh, Y., H. Okamura, S. Kajiura, M. Kumagai, T. Ando, M. Akiba, et al. Development and material testing of OF-Cu/DS-Cu/OF-Cu triplex tube and trial fabrication of a vertical target mock-up for ITER divertor. Journal of Nuclear Materials, Vol. 258–263, 1998, pp. 271–274.10.1016/S0022-3115(98)00361-4 ↗
39. Wang, Y. L., W. L. Wang, J. H. Huang, R. H. Yu, J. Yang, and S. H. Chen. Reactive composite brazing of C/C composite and GH3044 with Ag–Ti mixed powder filler material. Materials Science and Engineering A, Vol. 759, 2019, pp. 303–312.10.1016/j.msea.2019.05.065 ↗
40. Eustathopoulos, N., M. G. Nicholas, and B. Drevet. Wettability at Hightemperatures. Pergamon, Boston, USA, 1999.
41. Casalegno, V., M. Salvo, S. Murdaca, and M. Ferraris. One-step brazing process for CFC monoblock joints and mechanical testing. Journal of Nuclear Materials, Vol. 393, No. 2, 2009, pp. 300–305.10.1016/j.jnucmat.2009.06.015 ↗
42. Li, J. G. Kinetics of wetting and spreading of Cu-Ti alloys on alumina and glassy carbon substrates. Journal of Materials Science Letters, Vol. 11, No. 23, 1992, pp. 1551–1554.10.1007/BF00740830 ↗
43. Li, H., H. R. Geng, G. L. Chen, J. H. Chen, and M. A. Chen. Microstructure and strength of Cf /C composites joint brazed with Cu based brazing filler metal. Welding & Jioning, Vol. 01, 2008, pp. 42 (in Chinese).
44. Yi, Z. H., K. Z. Yang, J. Xiang, F. M. Liu, and S. Y. Zhao. Experimental research on Ti-Cu brazing filler for C/C composites. Materials Research and Application, Vol. 03, 2008, pp. 215 (in Chinese).
45. Chen, J. H. Microstructure and properties of brazed joint of Cf /C composite by vacuum brazing using Cu based active brazed filler. Material and Heat Treatment, Vol. 39, 2010, pp. 94 (in Chinese).
46. Li, J. L., J. T. Xiong, and F. S. Zhang. Transient liquid-phase diffusion bonding of two-dimensional carbon-carbon composites to niobium alloy. Materials Science and Engineering A, Vol. 483–484, 2008, pp. 698–700.10.1016/j.msea.2006.11.170 ↗
47. Salvo, M., P. Lemoine, M. Ferraris, M. A. Montorsi, and R. Matera. Cu-/Pb rheocast alloy as joining material for CFC composites. Journal of Nuclear Materials, Vol. 226, No. 1-2, 1995, pp. 67–71.10.1016/0022-3115(95)00107-7 ↗
48. Koppitz, Th., G. Pintsuk, U. Reisgen, J. Remmel, T. Hirai, R. Sievering, et al. High-temperature brazing for reliable tungsten-CFC joints. Physica Scripta, Vol. 128, 2007, pp. 175–181.10.1088/0031-8949/2007/T128/034 ↗
49. Liu, J. Y. Brazing of carbon-carbon composites: filler metals and techniques for brazing C-C composite to metals. PhD thesis, Auburn University, 1993.
50. Liu, J. Y., S. Chen, and B. A. Chin. Brazing of vanadium and carbon-carbon composites to stainless steel for fusion reactor applications. Journal of Nuclear Materials, Vol. 212, 1994, pp. 1590–1593.10.1016/0022-3115(94)91095-2 ↗
51. Trester, P. W., P. G. Valentine, W. R. Johnson, E. Chin, E. E. Reis, and A. P. Colleraine. Tensile fracture characterization of braze joined copper-to-CFC coupon as assemblies. Journal of Nuclear Materials, Vol. 233–237, 1996, pp. 906–912.10.1016/S0022-3115(96)00246-2 ↗
52. Luo, Y., H. Bian, H. W. Niu, Y. Y. Song, Z. B. Chen, X. G. Song, and M. R. Wang. Interfacial microstructure and mechanical properties of C/C composites and Nb joints brazed with Cu75Pt25 filler metal. Vacuum, Vol. 157, 2018, pp. 202–209.10.1016/j.vacuum.2018.08.036 ↗
53. Lauf, R. J., A. D. McMillan, and A. J. Moorhead. Method for joining carbon-carbon composites to metals. US. Patent 5648180, 1997.
54. Wang, J., K. Z. Li, X. R. Song, L. J. Guo, W. Li, and Z. Q. Li. The study on joining carbon/carbon composites using Ti-Ni-Si compound. Materials Science and Engineering A, Vol. 547, 2012, pp. 12–18.10.1016/j.msea.2012.03.059 ↗
55. Wang, J., K. Z. Li, W. Li, H. J. Li, Z. Q. Li, and L. J. Guo. The preparation and mechanical properties of carbon/carbon composite joints using Ti-Si-SiC-C filler as interlayer. Materials Science and Engineering A, Vol. 574, 2013, pp. 37–45.10.1016/j.msea.2013.03.007 ↗
56. Appendino, P., V. Casalegno, M. Ferraris, M. Grattarola, M. Merola, and M. Salvo. Joining of C/C composites to copper. Fusion Engineering and Design, Vol. 68, 2003, pp. 225–229.10.1016/S0920-3796(03)00218-7 ↗
57. Branca, V., A. Federici, and M. Grattarola. The brazing technology for high heat flux components. 10th International Workshop on Carbon Materials for Fusion Applications, September 17–19, 2003, Jülich, Germany.
58. Huang, C. Brazing bonding processes and interface behavior of C/C composite and TiBw/TC4 alloy. Master's thesis, Harbin Institute of Technology, 2010 (in Chinese).
59. Xu, L. G. Study on technology and mechanism of brazing C/C composite to niobium. Master's thesis, Harbin Institute of Technology, 2013 (in Chinese).
60. Cao, J., Z. J. He, J. L. Qi, H. Q. Wang, and J. C. Feng. Brazing of C/C composite to TiAl alloy using (Ti/Ni/Cu)f multi-foil filler. Jixie Gongcheng Xuebao, Vol. 54, No. 1, 2018, pp. 108–114 (in Chinese).10.3901/JME.2018.09.108 ↗
61. Dadras, P., T. T. Ngai, and G. M. Mehrotra. Joining of carbon-carbon composites using boron and titanium disilicide interlayers. Journal of the American Ceramic Society, Vol. 80, No. 1, 1997, pp. 125–132.10.1111/j.1151-2916.1997.tb02800.x ↗
62. Wang, J., G. Z. Yang, F. Q. Zhang, Y. L. Xiong, and Q. L. Xiong. The preparation and mechanical properties of carbon/carbon (C/C) composite and carbon fiber reinforced silicon carbide (Cf /SiC) composite joint by partial transient liquid phase (PTLP) diffusion bonding process. Vacuum, Vol. 158, 2018, pp. 113–116.10.1016/j.vacuum.2018.09.045 ↗
63. Ma, W. L., W. Mao, and X. H. Li. The brazing of carbon/carbon composite using Ni-based high-temperature filler metal. Proceedings of the 10th National Welding Academic Conference, March, 2001, China (in Chinese).
64. Singh, M., R. Asthana, and T. P. Shpargel. Brazing of ceramic-matrix composites to Ti and hastealloy using Ni-base metallic glass interlayers. Materials Science and Engineering A, Vol. 498, No. 1-2, 2008, pp. 19–30.10.1016/j.msea.2007.11.150 ↗
65. Tian, X. Y. Technical and mechanism study on brazing of C/C composites to GH99 nickel-base superalloy. Master's thesis, Harbin Institute of Technology, 2010 (in Chinese).
66. Guo, L. J., C. Guo, H. J. Li, and K. Z. Li. Mechanical properties and microstructure of the joints between carbon-carbon composites and Ni based high temperature alloys. Rare Metal Materials and Engineering, Vol. 40, 2011, pp. 111–114 (in Chinese).
67. Zhang, S. M., K. Z. Li, J. Wang, X. R. Song, and L. J. Guo. PTLP bonding C/C composites to super-alloy GH3044 with Ni/Ti interlayer. Journal of Solid Rocket Technology., Vol. 35, 2012, pp. 414–418 (in Chinese).
68. Feng, Z. W., T. F. Gao, T. W. Shao, W. Guo, Y. Zhu, and P. Qu. Brazing of C/C composite and Ni-based high temperature alloy GH3128. Transactions of the China Welding Institution., Vol. 36, 2015, pp. 105 (in Chinese).
69. Wu, Y. Z., H. G. Li, L. Q. Ning, J. Y. Mao, and J. X. Bi. Microstructure and property analysis of the vacuum brazed carbon-carbon composites and high temperature alloy joint. Aerospace Materials & Technology, Vol. 1, 2015, pp. 69 (in Chinese).
70. Shi, J. M., L. X. Zhang, X. Y. Tian, H. W. Li, and J. C. Feng. Vacuum brazing of the Cf /C composite and Ni base superalloy using MBF 20 filler. Vacuum, Vol. 156, 2018, pp. 427–433.10.1016/j.vacuum.2018.08.004 ↗
71. Pintsuk, G., V. Casalegno, M. Ferraris, T. Koppitz, and M. Salvo. Thermal fatigue characterization of CFC divertor modules using a one-step brazing process. Journal of Nuclear Materials, Vol. 426, No. 1-3, 2012, pp. 78–84.10.1016/j.jnucmat.2012.03.021 ↗
72. Salvo, M., V. Casalegno, S. Rizzo, F. Smeacetto, M. Ferraris, and M. Merola. One-step brazing process to join CFC composites to copper and copper alloy. Journal of Nuclear Materials, Vol. 374, No. 1-2, 2008, pp. 69–74.10.1016/j.jnucmat.2007.07.010 ↗
73. Appendino, P., M. Ferraris, V. Casalegno, M. Salvo, M. Merola, and M. Grattarola. Proposal for a new technique to join CFC composites to copper. Journal of Nuclear Materials, Vol. 348, No. 1-2, 2006, pp. 102–107.10.1016/j.jnucmat.2005.09.007 ↗
74. Appendino, P., M. Ferraris, V. Casalegno, M. Salvo, M. Merola, and M. Grattarola. Direct joining of CFC to copper. Journal of Nuclear Materials, Vol. 329–333, 2004, pp. 1563–1566.10.1016/j.jnucmat.2004.04.313 ↗
75. Casalegno, V., M. Salvo, and M. Ferraris. Surface modification of carbon/carbon composites to improve their wettability by copper. Carbon, Vol. 50, No. 6, 2012, pp. 2296–2306.10.1016/j.carbon.2012.01.049 ↗
76. Song, X. R., H. J. Li, V. Casalegno, M. Salvo, M. Ferraris, and X. R. Zeng. Microstructure and mechanical properties of C/C composite/Ti6Al4V joints with a Cu/TiCuZrNi composite brazing alloy. Ceramics International, Vol. 42, No. 5, 2016, pp. 6347–6354.10.1016/j.ceramint.2016.01.026 ↗
77. Song, X. R., H. J. Li, V. Casalegno, M. Salvo, M. Ferraris, and X. R. Zeng. In situ TiC particle reinforced TiCuZrNi brazing alloy for joining C/C composites to Ti6Al4V. International Journal of Applied Ceramic Technology, Vol. 15, No. 3, 2018, pp. 611–618.10.1111/ijac.12863 ↗
78. Li, Z. X., L. Zhou, Z. Xu, Y. F. Zhang, and J. H. Du. A method for joining carbon matrix composite materials with titanium alloys. China, 2002, id. 02116859.8 (in Chinese).
79. Shen, Y. X., Z. L. Li, C. Y. Hao, and J. S. Zhang. Joining C/C composite to copper using active Cu-3.5Si braze. Journal of Nuclear Materials, Vol. 421, No. 1-3, 2012, pp. 28–31.10.1016/j.jnucmat.2011.10.048 ↗
80. Zhang, L. X., C. L. Tian, X. Y. Tian, J. C. Feng, J. S. Shi, and Y. C. Liang. Research on vacuum brazing of C/C-Re composite to Nb. Transactions of the China Welding Institution., Vol. 36, 2015, pp. 47 (in Chinese).
81. Guo, L. J., H. J. Li, C. Guo, K. Z. Li, and T. Feng. Joining of C/C Composites and GH3128 Ni-based superalloy with Ni-Ti mixed powder as an interlayer. Rare Metal Materials and Engineering, Vol. 40, No. 12, 2011, pp. 2088–2091.10.1016/S1875-5372(12)60018-6 ↗
82. Zhang, X., X. H. Shi, J. Wang, H. J. Li, and K. Z. Li. Brazing of C/C composites and GH3044 Ni-based superalloy using Ni71CrSi as the interlayer. Materials China, Vol. 32, 2013, pp. 665–670 (in Chinese)
83. Shi, X. H., X. X. Jin, H. J. Lin, J. Y. Jing, L. Li, and C. C. Wang. Joining of SiC nanowires-toughened SiC coated C/C composites and nickel based superalloy (GH3044) using Ni71CrSi interlayer. Journal of Alloys and Compounds, Vol. 693, 2017, pp. 837–842.10.1016/j.jallcom.2016.09.245 ↗
84. Zhu, Y. A. Research on the growth of CNTs on C/C composite and the process and mechanism of brazing with Ti600 alloy. Master's thesis, Harbin Institute of Technology, 2016 (in Chinese).
85. Song, Y. H. Research on the growth of CNTs on C/C composite and the process and mechanism of brazing with Nb. Master's thesis, Harbin Institute of Technology, 2017 (in Chinese).
86. Shi, X. H., X. X. Jin, N. N. Yan, and L. Yang. Influence of micro-oxidation on joints of C/C composites and GH3044 for large-size aerospace parts. Acta Astronautica, Vol. 140, 2017, pp. 478–484.10.1016/j.actaastro.2017.09.015 ↗
87. He, Z. J., C. Li, J. L. Qi, Y. X. Huang, J. C. Feng, and J. Cao. Preinfiltration and brazing behaviors of Cf /C composites with high temperature Ti-Si eutectic alloy. Carbon, Vol. 140, 2018, pp. 57–67.10.1016/j.carbon.2018.08.021 ↗
88. Yang, Z. W., C. L. Wang, Y. Han, Y. T. Zhao, Y. Wang, and D. P. Wang. Design of reinforced interfacial structure in brazed joints of C/C composites and Nb by pre-oxidation surface treatment combined with in situ growth of CNTs. Carbon, Vol. 143, 2019, pp. 494–506.10.1016/j.carbon.2018.11.047 ↗
89. Shen, Y. X., Z. L. Li, C. Y. Hao, and J. S. Zhang. A novel approach to brazing C/C composite to Ni-based superalloy using alumina interlayer. Journal of the European Ceramic Society, Vol. 32, No. 8, 2012, pp. 1769–1774.10.1016/j.jeurceramsoc.2011.12.016 ↗
90. Zhou, Y. H., D. Liu, H. W. Niu, X. G. Song, X. D. Yang, and J. C. Feng. Vacuum brazing of C/C composite to TC4 alloy using nano-Al2O3 strengthened AgCuTi composite filler. Materials & Design, Vol. 93, 2016, pp. 347–356.10.1016/j.matdes.2015.12.143 ↗
91. Zhou, Y. H., D. Liu, X. G. Song, J. H. Liu, Y. Y. Song, Z. Wang, et al. Characterization of carbon/carbon composite/Ti6Al4V joints brazed with graphene nanosheets strengthened AgCuTi filler. Ceramics International, Vol. 43, No. 18, 2017, pp. 16600–16610.10.1016/j.ceramint.2017.09.049 ↗
92. Liu, D., Y. Y. Song, Y. H. Zhou, X. G. Song, W. Fu, and J. C. Feng. Brazing of C/C composite and Ti-6Al-4V with graphene strengthened AgCuTi filler: Effects of graphene on wettability, microstructure and mechanical properties. Chinese Journal of Aeronautics, Vol. 31, No. 7, 2018, pp. 1602–1608.10.1016/j.cja.2017.08.017 ↗
93. Zhang, S. Y., Y. Yuan, Y. Y. Su, and X. R. Song. Interfacial microstructure and mechanical properties of brazing carbon/carbon composites to stainless steel using diamond particles reinforced Ag-Cu-Ti brazing alloy. Journal of Alloys and Compounds, Vol. 719, 2017, pp. 108–115.10.1016/j.jallcom.2017.05.151 ↗
94. Ba, J., Y. H. Wang, Y. L. Liu, J. H. Lin, J. L. Qi, G. Wang et al. In situ consume excessive Ti element and form fine Ti based compounds as reinforcements for strengthening C/C-TC4 joints. Vacuum, Vol. 143, 2017, pp. 303–311.10.1016/j.vacuum.2017.06.035 ↗
95. Zhao, L., J. B. Hou, and X. H. Li. Active cement added brazing of Cf /C composites to copper. Welding Journal, Vol. 01, 2018, pp. 46 (in Chinese).
96. Lin, T. S., M. X. Yang, P. He, C. Huang, P. Pan, and Y. D. Huang. Effect of in situ synthesized TiB whisker on microstructure and mechanical properties of carbon-carbon composite and TiBw/Ti-6Al-4V composite joint. Materials & Design, Vol. 32, No. 8-9, 2011, pp. 4553–4558.10.1016/j.matdes.2011.04.028 ↗
97. Yu, S. Research on joining of carbon materials to CuCrZr alloys with Cu-based fillers. Master's thesis, Wuhan Institute of Technology, 2016 (in Chinese).
98. Song, X. R., H. J. Li, X. R. Zeng, and L. L. Zhang. Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy. Materials Letters, Vol. 183, 2016, pp. 232–235.10.1016/j.matlet.2016.07.111 ↗
99. Song, X. R., H. J. Li, and X. R. Zeng. Brazing of C/C composites to Ti6Al4V using multiwall carbon nanotubes reinforced TiCuZrNi brazing alloy. Journal of Alloys and Compounds, Vol. 664, 2016, pp. 175–180.10.1016/j.jallcom.2015.12.242 ↗
100. Tian, X. Y., J. L. Qi, L. X. Zhang, Y. C. Liang, H. W. Li, and J. C. Feng. Brazing of C/C composite and GH99 superalloy using BNi2+TiH2 composite filler powder. Transactions of the China Welding Institution, Vol. 35, 2014, pp. 35–38 (in Chinese).