Numerical Analysis for Eddy Current Characteristics of Magnetically Saturated Ferromagnetic Tubes

Abstract Magnetic saturation is applied to ferromagnetic tubes inspected by the encircling or inner coil because suppressing magnetic noise is important for the eddy current testing technique. Eddy current signal characteristics in magnetically saturated tubes are different from those in nonmagnetic tubes. In ferromagnetic tubes, defect signal phase angle is not useful for estimating defect depth because it does not depend on the defect depth. In this paper, numerical eddy current analysis has been done in order to explain the relationship between the defect depth and the phase angle in magnetically saturated tubes. This analysis is performed as follows: 1) The magnetic permeability near the defect is calculated as the non-linear magnetostatic problem. 2) The eddy current distribution is calculated as the linear magnetodynamic problem using the incremental permeability value calculated in step 1. The numerical analysis results reveal that the permeability around the defect remains inhomogeneous and it causes the unique eddy current characteristics. Based on these calculated results, a quantitative evaluation method of determining defect depth is proposed. After determining the defect shape by using signal characteristics obtained from the strongly magnetizing state, the defect depth can be estimated by using the signal amplitude.