journal article·2021-03-12Open access

Tuning filament composition and microstructure of 3D-printed bioceramic scaffolds facilitate bone defect regeneration and repair

Yi Chen, Jiaping Huang, Jiamei Liu, Yingming Wei, Xianyan Yang, Lihong Lei, Lili Chen, Yanmin Wu, Zhongru Gou

Regenerative Biomaterials· Volume 8· Issue 2

Abstract

Abstract It is still a challenge to optimize the component distribution and microporous structures in scaffolds for tailoring biodegradation (ion releasing) and enhancing bone defect repair within an expected time stage. Herein, the core–shell-typed nonstoichiometric wollastonite (4% and 10% Mg-doping calcium silicate; CSiMg4, CSiMg10) macroporous scaffolds with microporous shells (adding ∼10 μm PS microspheres into shell-layer slurry) were fabricated via 3D printing. The initial mechanical properties and bio-dissolution (ion releasing) in vitro, and osteogenic capacity in vivo of the bioceramic scaffolds were evaluated systematically. It was shown that endowing high-density micropores in the sparingly dissolvable CSiMg10 or dissolvable CSiMg4 shell layer inevitably led to nearly 30% reduction of compressive strength, but such micropores could readily tune the ion release behaviour of the scaffolds (CSiMg4@CSiMg10 vs. CSiMg4@CSiMg10-p; CSiMg10@CSiMg4 vs. CSiMg10@CSiMg4-p). Based on the in rabbit femoral bone defect repair model, the 3D μCT reconstruction and histological observation demonstrated that the CSiMg4@CSiMg10-p scaffolds displayed markedly higher osteogenic capability than the other scaffolds after 12 weeks of implantation. It demonstrated that core–shell bioceramic 3D printing technique can be developed to fabricate single-phase or biphasic bioactive ceramic scaffolds with accurately tailored filament biodegradation for promoting bone defect regeneration and repair in some specific pathological conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Stomotology, The Second Affiliated Hospital of Zhejiang University School of Medicine, Hangzhou 310009, China

Zhejiang-California International Nanosystems Institute, Zhejiang University, Hangzhou 310058, China

Funding

Key Research and Development Program of Zhejiang Province Foundation · Zhejiang Provincial Basic Public Welfare Project of China · Science and Technology Department of Zhejiang Province Foundation

References (45)

Show source-provided references
1. Recent advances in bone tissue engineering scaffolds10.1016/j.tibtech.2012.07.005 ↗
2. Current state of fabrication technologies and materials for bone tissue engineering10.1016/j.actbio.2018.09.031 ↗
3. Bone biomaterials and interactions with stem cells10.1038/boneres.2017.59 ↗
4. Novel bioactive materials with different mechanical properties10.1016/S0142-9612(03)00044-9 ↗
5. Bioactive glasses: where are we and where are we going?10.3390/jfb9010025 ↗
6. Biphasic calcium phosphate ceramics for bone reconstruction: a review of biological response10.1016/j.actbio.2017.01.076 ↗
7. Biphasic calcium phosphates bioceramics (HA/TCP): concept, physicochemical properties and the impact of standardization of study protocols in biomaterials research10.1016/j.msec.2016.11.039 ↗
8. Calcium phosphate-based osteoinductive materials10.1021/cr800427g ↗
9. Current advances in bone tissue engineering concerning ceramic and bioglass scaffolds: a review10.1016/j.ceramint.2019.07.096 ↗
10. Silicate bioceramics enhanced vascularization and osteogenesis through stimulating interactions between endothelia cells and bone marrow stromal cells10.1016/j.biomaterials.2014.01.039 ↗
11. Calcium silicate as a graft material for bone fractures: a systematic review10.1177/0300060518770940 ↗
12. Doped calcium silicate ceramics: a new class of candidates for synthetic bone substitutes10.3390/ma10020153 ↗
13. In vivo therapeutic effect of wollastonite and hydroxyapatite on bone defect10.1088/1748-605X/ab4238 ↗
14. Mechanical properties of bioactive glasses, ceramics, glass-ceramics and composites: state-of-the-art review and future challenges10.1016/j.msec.2019.109895 ↗
15. Simultaneous mechanical property and biodegradation improvement of wollastonite bioceramic through magnesium dilute doping10.1016/j.jmbbm.2015.09.012 ↗
16. Systematical evaluation of mechanically strong 3D printed diluted magnesium doping Wollastonite Scaffolds on Osteogenic capacity in rabbit calvarial defects10.1038/srep34029 ↗
17. Magnesium and osteoporosis: current state of knowledge and future research directions10.3390/nu5083022 ↗
18. A multimaterial scaffold with tunable properties: toward bone tissue repair10.1002/advs.201700817 ↗
19. Scaffolds for bone tissue engineering: state of the art and new perspectives10.1016/j.msec.2017.05.017 ↗
20. 3D bioactive composite scaffolds for bone tissue engineering10.1016/j.bioactmat.2017.10.001 ↗
21. Design strategy for the multi-layer core-shell bioceramics with controlled chemistry10.1111/jace.14229 ↗
22. Enhancing osteogenic capability of core-shell bilayered bioceramic microspheres with adjustable biodegradation10.1021/acsami.7b06798 ↗
23. Core-shell biphasic microspheres with tunable density of shell micropores providing tailorable bone regeneration10.1089/ten.tea.2018.0174 ↗
24. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
25. Mineralization in micropores of calcium phosphate scaffolds10.1016/j.actbio.2018.11.003 ↗
26. Effect of microporosity on scaffolds for bone tissue engineering10.1093/rb/rby001 ↗
27. Nanomaterial patterning in 3D printing10.1002/adma.201907142 ↗
28. Fabrication of 3D plotted scaffold with microporous strands for bone tissue engineering10.1039/C9TB02360G ↗
29. Multiscale porosity in compressible cryogenically 3D printed gels for bone tissue engineering10.1021/acsami.9b05460 ↗
30. Effect of pore size in bone regeneration using polydopamine-laced hydroxyapatite collagen calcium silicate scaffolds fabricated by 3D mould printing technology10.1111/ocr.12261 ↗
31. Hierarchically designed bone scaffolds: from internal cues to external stimuli10.1016/j.biomaterials.2019.119334 ↗
32. Printing and prototyping of tissues and scaffolds10.1126/science.1226340 ↗
33. A review on injectable chitosan/beta glycerophosphate hydrogels for bone tissue regeneration10.1016/j.ijbiomac.2018.10.014 ↗
34. 3D printing of a lithium-calcium-silicate crystal bioscaffold with dual bioactivities for osteochondral interface reconstruction10.1016/j.biomaterials.2018.04.005 ↗
35. Calcium silicate scaffolds promoting bone regeneration via the doping of Mg2+ or Mn2+ ion10.1016/j.compositesb.2020.107937 ↗
36. Custom repair of mandibular bone defects with 3D printed bioceramic scaffolds10.1177/0022034517734846 ↗
37. Hierarchical microchanneled scaffolds modulate multiple tissue-regenerative processes of immune-responses, angiogenesis, and stem cell homing10.1016/j.biomaterials.2019.119548 ↗
38. Bone tissue regeneration: the role of finely tuned pore architecture of bioactive scaffolds before clinical translation10.1016/j.bioactmat.2020.11.003 ↗
39. Material-based therapy for bone nonunion10.1016/j.matdes.2019.108161 ↗
40. Tuning pore features of mineralized collagen/PCL scaffolds for cranial bone regeneration in a rat model10.1016/j.msec.2019.110186 ↗
41. 3D printing magnesium-doped wollastonite/β-TCP bioceramics scaffolds with high strength and adjustable degradation10.1016/j.jeurceramsoc.2016.01.010 ↗
42. The horizon of materiobiology: a perspective on material-guided cell behaviors and tissue engineering10.1021/acs.chemrev.6b00654 ↗
43. Biomaterial-based metabolic regulation in regenerative engineering10.1002/advs.201900819 ↗
44. Cell-interactive 3D-scaffold: advances and applications10.1016/j.biotechadv.2009.02.002 ↗
45. Bone mineralization: from tissue to crystal in normal and pathological contexts10.1007/s00198-012-2228-y ↗