Effect of TiB2 and BN Coatings on Stress State of Si3N4–TiC Ceramics Surface Layer Under Force Loading
Source abstract
Abstract
Изучены особенности влияния покрытий TiB2 и BN на деформацию и напряженное состояние поверхностного слоя Si3N4‒TiC-керамики под действием силового нагружения. Установлено, что покрытие BN более благоприятно влияет на напряженно‒деформированное состояние структурных элементов керамики, чем покрытие TiB2. Влияние покрытий TiB2 и BN на напряженное состояние границы между керамикой и покрытием не столь однозначно: в пользу каждого покрытия свидетельствуют по три коэффициента.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. L. Xikun, L. Jing, Q. Like, et al., “Composition, characteristics and development of advanced ceramic cutting tools,” J. Rare Earths, 25(2), 287 – 294 (2007).10.1016/S1002-0721(07)60490-6 ↗
2. V. V. Kuzin, “Effectiveness of the nitride ceramic cutting tools in machining the gray irons,” Russ. Eng. Res., 24(5), 21 – 27 (2004).
3. S. N. Grigoriev, A. A. Vereschaka, S. V. Fyodorov, et al., “Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods,” Int. J. Adv. Manuf. Technol., 90(9 – 12), 3421 – 3435 (2017).10.1007/s00170-016-9676-z ↗
4. M. M. Al-Asadi and H. A. Al-Tameemi, “A review of tribological properties and deposition methods for selected hard protective coatings,” Tribol. Int., 176(3), Art. No. 107919 (2022).10.1016/j.triboint.2022.107919 ↗
5. V. Kuzin, S. Grigoriev, M. Volosova, et al., “Designing of details taking into account degradation of structural ceramics at exploitation,” Appl. Mech. Mater., 752 – 753, 268 – 271 (2015).10.4028/www.scientific.net/AMM.752-753.268 ↗
6. N. Panich and Y. Sun, “Effect of substrate rotation on structure, hardness and adhesion of magnetron sputtered TiB2 coating on high speed steel,” Thin Solid Films, 500(1 – 2), 190 – 196 (2006).10.1016/j.tsf.2005.11.055 ↗
7. J. Xu and W. Liu, “Wear characteristic of in situ synthetic TiB2 particulate-reinforced Al matrix composite formed by laser cladding,” Wear, 260(4 – 5), 486 – 492 (2006).10.1016/j.wear.2005.03.032 ↗
8. A. Nadeem, M. F. Maqsood, M. A. Raza, et al., “Binder free boron nitride-based coatings deposited on mild steel by chemical vapour deposition: Anti-corrosion performance analysis,” Phys. B (Amsterdam, Neth.), 602(4), 412600 (2021).10.1016/j.physb.2020.412600 ↗
9. C. Li, F. Xia, L. Yao, et al., “Investigation of the mechanical properties and corrosion behaviors of Ni-BN-TiC layers constructed via laser cladding technique,” Ceram. Int., 49(4), 6671 – 6677 (2023).10.1016/j.ceramint.2022.10.104 ↗
10. E. V. Kharanzhevskiy, A. G. Ipatov, M. D. Krivilyov, et al., “Ultralow friction behaviour of B4C–BN–MeO composite ceramic coatings deposited on steel,” Surf. Coat. Technol., 390(1), Art. No. 125664 (2020).10.1016/j.surfcoat.2020.125664 ↗
11. P. Karvankova, M. G. J. Veprek-Heijman, M. F. Zawrah, et al., “Thermal stability of nc-TiN/a-BN/a-TiB2 nanocomposite coatings deposited by plasma chemical vapor deposition,” Thin Solid Films, 467(1 – 2), 133 – 139 (2004).10.1016/j.tsf.2004.03.046 ↗
12. R. Ali, E. Alkhateeb, F., Kellner, et al., “Chemical vapor deposition of titanium based ceramic coatings on low carbon steel: Characterization and electrochemical evaluation,” Surf. Coat. Technol., 205(23 – 24), 5454 – 5463 (2011).10.1016/j.surfcoat.2011.06.014 ↗
13. B. Prakash, C. Ftikos, and J. P. Celis, “Fretting wear behavior of PVD TiB2 coatings,” Surf. Coat. Technol., 154(2 – 3), 182 – 188 (2002).10.1016/S0257-8972(02)00035-X ↗
14. X. Huang, S. Sun, and G. Tu, “Investigation of mechanical properties and oxidation resistance of CVD TiB2 ceramic coating on molybdenum,” J. Mater. Res. Technol., 9(1), 282 – 290 (2020).10.1016/j.jmrt.2019.10.056 ↗
15. A. Godavarty, A. Agarwal, and N. B. Dahotre, “Neural networks in studies on oxidation behavior of laser surface engineered composite boride coatings,” Appl. Surf. Sci., 161(1 – 2), 131 – 138 (2000).10.1016/S0169-4332(00)00279-8 ↗
16. D. Ozkan, “Friction and wear enhancement of magnetron sputtered bilayer Cr–N/TiB2 thin-film coatings,” Wear, 454 – 455, Art. No. 203344 (2020).10.1016/j.wear.2020.203344 ↗
17. F. Kustas, B. Mishra, and J. Zhou, “Fabrication and characterization of TiB2/TiC and tungsten co-sputtered wear coatings,” Surf. Coat. Technol., 153(1), 25 – 30 (2002).10.1016/S0257-8972(01)01520-1 ↗
18. A. Duarte, B. Coelho, M. Vila, et al., “Deposition of TiB2 onto X40 CrMoV 5-1-1 steel substrates by DC magnetron sputtering,” Vacuum, 81(11 – 12), 1519 – 1523 (2007).10.1016/j.vacuum.2007.04.013 ↗
19. M. Berger,M. Larsson, and S. Hogmark, “Evaluation of magnetron-sputtered TiB2 intended for tribological applications,” Surf. Coat. Technol., 124(2 – 3), 253 – 261 (2000).10.1016/S0257-8972(99)00638-6 ↗
20. M. N. Polyakov, M. Morstein, X. Maeder, et al., “Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering,” Surf. Coat. Technol., 368, 88 – 96 (2019).10.1016/j.surfcoat.2019.04.042 ↗
21. S. Zhang, G. Xiao, Z. Chen, et al., “Mechanical properties, microstructure and crack healing ability of Al2O3/TiC/TiB2/h-BN@Al2O3 self-lubricating ceramic tool material,” Ceram. Int., 47(10), Part A, 14551 – 14560 (2021).10.1016/j.ceramint.2021.02.035 ↗
22. K. Bewilogua, M. Keunecke, K. Weigel, et al., “Growth and characterization of thick cBN coatings on silicon and tool substrates,” Thin Solid Films, 469 – 470, 86 – 91 (2004).10.1016/j.tsf.2004.08.061 ↗
23. F. Xu, M. F. Yuen, B. He C. D.Wang, et al., “Microstructure and tribological properties of cubic boron nitride films on Si3N4 inserts via boron-doped diamond buffer layers,” Diamond Relat. Mater., 49, 9 – 13 (2014).10.1016/j.diamond.2014.07.014 ↗
24. S. Ferreira, P. Duarte, F. A. Almeida, et al., “Bilayered coatings of BN/diamond grown on Si3N4 ceramic substrates,” Diamond Relat. Mater., 20(4), 464 – 467 (2011).10.1016/j.diamond.2011.02.009 ↗
25. S. Grigoriev, V. Kuzin, D. Burton, et al., “The stress-strained state of ceramic tools with coating,” in: Proceedings of the 37th International MATADOR Conference, 2013, pp. 181 – 184.
26. V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Force analysis of the stress-strain state of the surface layer of ground Si3N4-TiC ceramics,” Refract. Ind. Ceram., 61(6), 720 – 726 (2021).10.1007/s11148-021-00549-w ↗
27. V. V. Kuzin, S. N. Grigor’ev, M. A. Volosova, and M. Y. Fedorov, “Force analysis of the stress-strain state of the surface layer of Al2O3–TiC ceramics with AlN and TiN coatings,” Refract. Ind. Ceram., 62(3), 355 – 360 (2021).10.1007/s11148-021-00607-3 ↗
28. V. V. Kuzin, S. N. Grigor’ev, M. A. Volosova, et al., “Significance of AlN and TiN coatings for controlled transformation of stress state of Si3N–TiC ceramics surface layer under force loading conditions,” Refract. Ind. Ceram., 63(2), 178 – 184 (2022).10.1007/s11148-022-00703-y ↗