Improvement of Sintering Conversion Technology for Bauxite Processing Using Solid Fuel Additives
Source abstract
Abstract
In order to increase the technical and economic parameters of the process of sintering bauxite charges in a rotary furnace, it is the use of additives of finely divided solid fuel in them, which, without significantly deteriorating the value of the initial components, make it possible to intensify the development of internal crystal chemical transformations in the resulting specks due to changing the intensity of heat and mass exchange processes. Laboratory studies of thermal transformations in bauxite charge sinter showed that the use of solid fuel additives intensifies the development of internal heat and mass exchange processes, reducing the temperature difference in the cross section of samples. Increasing the addition of solid fuel to the bauxite charge contributes to shifting the compaction processes to the region of elevated heat treatment temperatures. Increasing the conditions for the development of internal crystal chemical transformations using an internal heat source in the form of solid fuel additives up to 1 % contributes to an increase in the yield of aluminum oxide and sodium into the solution after leaching the resulting cake. Ill. 3. Ref. 12.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bauxite Residue and Utilization · Recycling and utilization of industrial and municipal waste in materials production · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. A. I. Liner, Production of Alumina [in Russian], Metallurgiya, Moscow (1961).
2. V. I. Matyukhin, O. V. Matyukhin, V. V. Shatsillo, and A. M. Matyukhina, “Improvement of the Waelz process of slag components based on the regularities of solid fuel combustion,” Metallurg, No. 10, 26 – 32 (2016).
3. S. N. Gushchin, M. D. Kazyaev, and Yu. V. Kryuchenkov, Theory and Practice of Heat Generation [in Russian], ed. V. I. Lobanov, S. N. Gushchin, UGTU-UPI, Yekaterinburg (2005).
4. V. I. Matyukhin, Yu. G. Yaroshenko, A. V. Matyukhina, et al., Technological Possibilities of Using Solid Fuel in Metallurgical Layer Technologies [in Russian], study guide, Rusayns, Moscow (2020).
5. V. D. Semikin, G. P. Medvedev, Z. F. Semina, et al., “Influence of coal additives on the intensification of the process of sintering of alumina-containing charges,” Tsvetn. Metally, No. 6, 22 – 24 (1981).
6. R. G. Rozentreter, B. S. Tkacheva, and N. S. Bersenev, “Studying the process of sintering bauxite-sulfide charges in a reducing-oxidizing medium in a rotary furnace,” Tr. Khim.- Metallurg. Instituta AN SSSR, No. 15, 87 – 89 (1960).
7. A. P. Voronin, L. K. Yakovlev, “Some data on the Na2O–Fe2O3 system,” Izv. AN SSSR. Ser. Khimich. Nauki, No. 6, 73 – 81 (1976).
8. V. I. Lobanov, V. M. Pavlovets, V. I. Matyukhin, and Yu. G. Yaroshenko, “Research of dilatometric changes and thermal state of sintered iron ore concentrates,” Izv. Vyssh. Uch. Zav. Chern. Metallurg., No. 6, 31 – 34 (1983).
9. V. A. Mazel, Alumina Production [in Russian], Metallurgiya, Moscow (1955).
10. V. I. Lobanov, V. M. Pavlovets, V. I. Matyukhin, and Yu. G. Yaroshenko, “Peculiarities of pellet sintering process,” Izv. Vyssh. Uch. Zav. Chern. Metallurg., No. 4, 27 ä 33 (1983).
11. Ya. E. Geguzin, Yu. I. Klinchuk, “Mechanism and kinetics of the initial stage of solid-phase sintering of compacts from powders of crystalline bodies,” Poroshkov. Metallurg., No. 7, 17 – 25 (1976).10.1007/BF00810490 ↗
12. V. I. Matyukhin, V. I. Lobanov, and N. P. Zhernakova, “Investigation of the influence of solid fuel additives in bauxite charge on the development of thermal transformations and the formation of quality of the sinter,” Izv. Vyssh. Uch. Zav. Chern. Metallurg., No. 2, 22 – 26 (1997).