Evaluation of AlN and TiN Coatings Effectiveness for Controlling the Stress State of Surface Layer of Si3N4–TiC Ceramics under Combined Loading
Source abstract
Abstract
Peculiarities of effect of AlN and TiN coatings on the stress state of the surface layer of Si3N4‒TiC ceramics under combined load are studied. It was found that TiN coating has a more favorable effect on stress state of the structural elements of ceramics, and AlN coating ― on stress state of the boundary between the coating and ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Engineering Technology and Methodologies · Surface Treatment and Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. V. V. Kuzin, S. N. Grigor’ev, D. R. Burton, et al., “A new generation of ceramic tools,” in: Proceedings of the 10th International Conference on Manufacturing Research ICMR 2012, 2012, pp. 523 – 528.
2. M. H. Bocanegra-Bernal and B. Matovic, “Dense and nearnet-shape fabrication of Si3N4 ceramics,” Mater. Sci. Eng., A, 500(1/2), 130 – 149 (2009).10.1016/j.msea.2008.09.015 ↗
3. Y. Duan, N. Liu, J. Zhang, H. Zhang, et al., “Cost effective preparation of Si3N4 ceramics with improved thermal conductivity and mechanical properties,” J. Eur. Ceram. Soc., 40(4), 298 – 304 (2020).10.1016/j.jeurceramsoc.2019.10.003 ↗
4. C. Santos, K. Strecker, M. J. R. Barboza, et al., “Compressive creep behavior of hot-pressed Si3N4 ceramics using alumina and a rare earth solid solution as additives,” Int. J. Refract. Met. Hard Mater., 23(3), 183 – 192 (2005).10.1016/j.ijrmhm.2005.02.003 ↗
5. X. Zhu, Y. Zhou, and K. Hirao, “Effects of processing method and additive composition on microstructure and thermal conductivity of Si3N4 ceramics,” J. Eur. Ceram. Soc., 26(4/5), 711 – 718 (2006).10.1016/j.jeurceramsoc.2005.07.027 ↗
6. C. Tian, H. Jiang, and N. Liu, “Thermal shock behavior of Si3N4–TiN nanocomposites,” Int. J. Refract. Met. Hard Mater., 29(1), 14 – 20 (2011).10.1016/j.ijrmhm.2010.06.006 ↗
7. H. Miyazaki, H. Hyuga, Y. Yoshizawa, et al., “Correlation of wear behavior and indentation fracture resistance in silicon nitride ceramics hot-pressed with alumina and yttria,” J. Eur. Ceram. Soc., 29(8), 1535 – 1542 (2009).10.1016/j.jeurceramsoc.2008.08.020 ↗
8. X.-J. Liu, Z.-Y. Huang, Q.-M. Ge, et al., “Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO–Al2O3–SiO2 as sintering additive,” J. Eur. Ceram. Soc., 25(14), 3353 – 3359 (2005).10.1016/j.jeurceramsoc.2004.08.025 ↗
9. N. Calis Acikbas, R. Kumar, F. Kara, et al., “Influence of β-Si3N4 particle size and heat treatment on microstructural evolution of α:β-SiAlON ceramics,” J. Eur. Ceram. Soc., 31(4), 629 – 635 (2011).10.1016/j.jeurceramsoc.2010.10.001 ↗
10. S. Hampshire and T. Kennedy, “Silicon nitride-silicon carbide micro/nano-composites — a review,” Int. J. Appl. Ceram. Technol., 19(2), 1107 – 1125 (2021).10.1111/ijac.13903 ↗
11. M. Balog, J. Keckes, T. Schoberl, et al., “Nano/macro-hardness and fracture resistance of Si3N4/SiC composites with up to 13 wt.% of SiC nano-particles,” J. Eur. Ceram. Soc., 27(5), 2145 – 2152 (2007).10.1016/j.jeurceramsoc.2006.08.010 ↗
12. Y. Luo, Z. Zheng, C. Xu, and X. Mei, “In situ preparation of Si3N4-TiN composite by pyrolysis of polytitanosilazane (PTSZ),” Ceram. Int., 35(3), 1301 – 1303 (2009).10.1016/j.ceramint.2008.05.018 ↗
13. M. B. Maros, A. K. Nemeth, Z. Karoly, et al., “Tribological characterisation of silicon nitride/multilayer graphene nanocomposites produced by HIP and SPS technology,” Tribol. Int., 93, Part A, 269 – 281 (2016).10.1016/j.triboint.2015.08.041 ↗
14. V. V. Kuzin, S. Yu. Fedorov, and S. N. Grigor’ev, “Correlation of diamond grinding regimes with Si3N4-ceramic surface quality,” Refract. Ind. Ceram., 58(1), 78 – 81 (2017).10.1007/s11148-017-0058-3 ↗
15. V. V. Kuzin, S. Yu. Fedorov, and S. N. Grigor’ev, “Production process planning for preparing Si3N4-ceramic objects taking account of edge defectiveness,” Refract. Ind. Ceram., 58(5), 562 – 565 (2018).10.1007/s11148-018-0145-0 ↗
16. P. P. Shukla and J. Lawrence, “Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment,” Opt. Lasers Eng., 49(7), 998 – 1011 (2011).10.1016/j.optlaseng.2011.01.014 ↗
17. Y. Xing, X. Wang, Z. Du, et al., “Synergistic effect of surface textures and DLC coatings for enhancing friction and wear performances of Si3N4/TiC ceramic,” Ceram. Int., 48(1), 514 – 524 (2020).10.1016/j.ceramint.2021.09.128 ↗
18. Y.-G. Kim, J. Tatami, K. Komeya, et al., “Effect of the microstructure of Si3N4 on the adhesion strength of TiN film on Si3N4,” Thin Solid Films, 510(1/2), 222 – 228 (2006).
19. W. Liu, Q. Chu, J. Zeng, et al., “PVD-CrAlN and TiAlN coated Si3N4 ceramic cutting tools—1. Microstructure, turning performance and wear mechanism,” Ceram. Int., 43(12), 8999 – 9004 (2017).10.1016/j.ceramint.2017.04.041 ↗
20. D. Pakula, “Structure and properties of multicomponent coatings deposited onto sialon tool ceramics,” Arch. Mater. Sci. Eng., 52(1), 54 – 60 (2011).
21. Z. Peng, H. Miao,W.Wang, et al., “Hard and wear-resistant titanium nitride films for ceramic cutting tools by pulsed high energy density plasma,” Surf. Coat. Technol., 166(2/3), 183 – 188 (2003).10.1016/S0257-8972(02)00776-4 ↗
22. Z. H. Jin and W. J. Luo, “Thermal shock residual strength of functionally graded ceramics,” Mater. Sci. Eng., A, 435/436(4/5), 71 – 77 (2006).10.1016/j.msea.2006.07.011 ↗
23. O. Sevecek, M. Kotoul, D. Leguillon, et al., “Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion,” Proc. Struct. Integr., 2, 2014 – 2021 (2016).
24. X. Li, J. Liu, L. Qiu, et al., “Composition, characteristics and development of advanced ceramic cutting tools,” J. Rare Earths, 25, Suppl. 2, 287 – 294 (2007).10.1016/S1002-0721(07)60490-6 ↗
25. G. Blugan, M. Hadad, T. Graule, et al., “Si3N4–TiN–SiC three particle phase composites for wear applications,” Ceram. Int., 40(1), Part B, 1439 – 1446 (2014).10.1016/j.ceramint.2013.07.027 ↗
26. T. Wang, J. Zhang, W. J. Lee, et al., “Numerical analysis on the residual stress distribution and its influence factor analysis for Si3N4/42CrMo brazed joint,” Simul. Modell. Pract. Theor., 95, 49 – 59 (2019).10.1016/j.simpat.2019.04.007 ↗
27. S. Grigoriev, V. Kuzin, D. Burton, et al., “The stress-strained state of ceramic tools with coating,” in: Proceedings of the 37th International MATADOR Conference, 2013, pp. 181 – 184.
28. V. V. Kuzin, S. N. Grigor’ev, and M. A. Volosova, “Basic framework for computer-aided engineering of polished ceramic surface layers,” Refract. Ind. Ceram., 61(3), 349 – 354 (2020).10.1007/s11148-020-00485-1 ↗
29. V. V. Kuzin, S. N. Grigor’ev, M. A. Volosova, et al., “Significance of AlN and TiN coatings for controlled transformation of stress state of Si3N4–TiC ceramics surface layer under force loading conditions,” Nov. Ogneupory, No. 3, 62 – 68 (2022).10.1007/s11148-022-00703-y ↗
30. V. V. Kuzin, S. N. Grigor’ev, M. Yu. Fedorov, et al., “Effect of AlN and TiN coatings on thermal and stress state of Si3N4–TiC ceramics surface layer under heat flow conditions,” Nov. Ogneupory, No. 4, 57 – 63 (2022).10.17073/1683-4518-2022-4-57-63 ↗
31. V. Kuzin and S. Grigoriev, “Method of investigation of the stress-strain state of surface layer of machine elements from a sintered nonuniform material,” Appl. Mech. Mater., 486, 32 – 35 (2014).10.4028/www.scientific.net/AMM.486.32 ↗