CELLULOSE NANOCRYSTAL-INCORPORATED CO-PROCESSED EXCIPIENT IN TABLET FORMULATION
Source abstract
Abstract
The objective of the current work is to develop a new co-processed excipient based on cellulose nanocrystals and investigate its pharmaceutical excipient properties. Cellulose nanocrystals were isolated from the pseudostem of Musa balbisiana, following TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy)-mediated oxidation, and then co-processed with potato starch by the wet granulation method. Physicochemical properties, including the flow property, consolidation characteristics and rate of consolidation, were investigated, and a Kawakita plot was also generated. The compressibility, compactibility and tabletability of the novel excipient were determined. The equivalent circle diameter of the excipient particle was calculated as 4.09±0.90 μm, exhibiting a fair to passable flow property. The mean yield pressure from the Heckel plot was found to be 82.64 MPa, indicating its ability to undergo plastic deformation at relatively lower compression pressures. When compared to sodium starch glycolate, a standard tablet disintegrant, the cellulose nanocrystal-based co-processed excipient produced better dissolution of the model drug paracetamol.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Polysaccharides Composition and Applications · Polysaccharides and Plant Cell Walls
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. "1 V. S. Dave, S. D. Saoji, N. A. Raut and R. V. Haware, J. Pharm. Sci., 104, 906 (2015), https://doi.org/10.1002/jps.2429910.1002/jps.24299 ↗
2. 2 J. Hamman and J. Steenekamp, Expert Opin. Drug Deliv., 9, 219 (2012), https://doi.org/10.1517/17425247.2012.64790710.1517/17425247.2012.647907 ↗
3. 3 M. Hruby, S. K. Filippov and P. Stepanek, Eur. Polym. J., 65, 82 (2015), https://doi.org/10.1016/j.eurpolymj.2015.01.01610.1016/j.eurpolymj.2015.01.016 ↗
4. 4 H. Kalasz and I. Antal, Curr. Med. Chem., 13, 2535 (2006), https://doi.org/10.2174/09298670677820164810.2174/092986706778201648 ↗
5. 5 J. Rojas, I. Buckner and V. Kumar, Drug Develop. Ind. Pharm., 38, 1159 (2012), https://doi.org/10.3109/03639045.2011.64583310.3109/03639045.2011.645833 ↗
6. 6 S. Saha and A. F. Shahiwala, Expert Opin. Drug Deliv., 6, 197 (2009), https://doi.org/10.1517/1742524080270897810.1517/17425240802708978 ↗
7. 7 H. Zhao, L. Zhao, X. Lin and L. Shen, Carbohyd. Polym., 278, 118968 (2022), https://doi.org/10.1016/j.carbpol.2021.11896810.1016/j.carbpol.2021.118968 ↗
8. 8 S. Wang, J. Li, X. Lin, Y. Feng, X. Kou et al., Int. J. Pharm., 486, 370 (2015), https://doi.org/10.1016/j.ijpharm.2015.03.06910.1016/j.ijpharm.2015.03.069 ↗
9. 9 V. Bhatia, A. Dhingra, B. Chopra and K. Guarve, J. Drug Deliv. Sci. Technol. 71, 103316 (2022), https://doi.org/10.1016/j.jddst.2022.10331610.1016/j.jddst.2022.103316 ↗
10. 10 R. Benabbas, N. M. Sanchez-Ballester, B. Bataille, T. Sharkawi and I. Soulairol, Powder Technol., 378, 576 (2021), https://doi.org/10.1016/j.powtec.2020.10.02710.1016/j.powtec.2020.10.027 ↗
11. 11 J. Muzikova, A. Srbova and P. Svacinova, Pharm. Develop. Technol., 22, 964 (2017), https://doi.org/10.3109/10837450.2015.113171710.3109/10837450.2015.1131717 ↗
12. 12 R. M. A. Domingues, M. E. Gomes and R. L. Reis, Biomacromolecules, 15, 2327 (2014), https://doi.org/10.1021/bm500524s10.1021/bm500524s ↗
13. 13 Y. Habibi, L. A. Lucia and O. J. Rojas, Chem. Rev., 110, 3479 (2010), https://doi.org/10.1021/cr900339w10.1021/cr900339w ↗
14. 14 R. J. Moon, A. Martini, J. Nairn, J. Simonsen and J. Youngblood, Chem. Soc. Rev., 40, 3941 (2011), https://doi.org/10.1039/C0CS00108B10.1039/c0cs00108b ↗
15. 15 T. Aziz, H. Fan, X. Zhang, F. Haq, A. Ullah et al., J. Polym. Environ., 28, 1117 (2020), https://doi.org/10.1007/s10924-020-01674-210.1007/s10924-020-01674-2 ↗
16. 16 L. Thompson, J. Azadmanjiri, M. Nikzad, I. Sbarski, J. Wang et al., Rev. Adv. Mater. Sci., 58, 1 (2019), https://doi.org/10.1515/rams-2019-000110.1515/rams-2019-0001 ↗
17. 17 A. Kaushik, M. Singh and G. Verma, Carbohyd. Polym., 82, 337 (2010), https://doi.org/10.1016/j.carbpol.2010.04.06310.1016/j.carbpol.2010.04.063 ↗
18. 18 X. Ma, P. R. Chang and J. Yu, Carbohyd. Polym., 72, 369 (2008), https://doi.org/10.1016/j.carbpol.2007.09.00210.1016/j.carbpol.2007.09.002 ↗
19. 19 A. M. Slavutsky and M. A. Bertuzzi, Carbohyd. Polym., 110, 53 (2014), http://dx.doi.org/10.1016/j.carbpol.2014.03.04910.1016/j.carbpol.2014.03.049 ↗
20. 20 M. Hietala, A. P. Mathew and K. Oksman, Eur. Polym. J., 49, 950 (2013), http://dx.doi.org/10.1016/j.eurpolymj.2012.10.01610.1016/j.eurpolymj.2012.10.016 ↗
21. 21 P. T. Anastas and J. C. Warner, in "Green Chemistry: Theory and Practice", Oxford Science Publications, New York, 1998
22. 22 C. S. M. Pereira, V. M. T. M. Silva and A. E. Rodrigues, Green Chem., 13, 2658 (2011), https://doi.org/10.1039/c1gc15523g10.1039/c1gc15523g ↗
23. 23 R. Nath and L. Pachuau, Cellulose Chem. Technol., 56, 727 (2022), https://doi.org/10.35812/CelluloseChemTechnol.2022.56.6410.35812/CelluloseChemTechnol.2022.56.64 ↗
24. 24 R. Nath and L. Pachuau, Lett. Org. Chem., 20, 549 (2023), https://doi.org/10.2174/157017862066622122716441010.2174/1570178620666221227164410 ↗
25. 25 T. Saito, S. Kimura, Y. Nishiyama and A. Isogai, Biomacromolecules, 8, 2485 (2007), https://doi.org/10.1021/bm070397010.1021/bm0703970 ↗
26. 26 L. Pachuau, R. S. Dutta, L. Hauzel, T. B. Devi and D. Deka, Carbohyd. Polym., 206, 336 (2019), https://doi.org/10.1016/j.carbpol.2018.11.01310.1016/j.carbpol.2018.11.013 ↗
27. 27 I. Ilic, P. Kasa Jr., R. Dreu, K. Pintye-Hodi and S. Srcic, Drug Develop. Ind. Pharm., 35, 1271 (2009), https://doi.org/10.1080/0363904090293294510.1080/03639040902932945 ↗
28. 28 O. Adeoye and G. Alebiowu, Pharm. Develop. Technol., 19, 901 (2014), https://doi.org/10.3109/10837450.2013.84084310.3109/10837450.2013.840843 ↗
29. 29 M. Krstic, Z. Maksimovic, S. Ibrić, T. Bakic, J. Prodanovic et al., Cellulose Chem. Technol., 52, 577 (2018), https://www.cellulosechemtechnol.ro/pdf/CCT7-8(2018)/p.577-588.pdf10.1111/medu.13585 ↗
30. 30 S. Patel, A. M. Kaushal and A. K. Bansal, Crit. Rev. Ther. Drug Carrier Syst., 23, 1 (2006), https://doi.org/10.1615/CritRevTherDrugCarrierSyst.v23.i1.1010.1615/CritRevTherDrugCarrierSyst.v23.i1.10 ↗
31. 31 C. Wu, S. M. Best, A. C. Bentham, B. C. Hancock and W. Bonfield, Pharm. Res., 23, 1898 (2006), https://doi.org/10.1007/s11095-006-9005-610.1007/s11095-006-9005-6 ↗
32. 32 United States Pharmacopeia (2023). General Chapter, 〈1062〉 Tablet Compression Characterization. USP-NF. Rockville, MD: United States Pharmacopeia
33. 33 C. K. Tye, C. Sun and G. E. Amidon, J. Pharm. Sci., 94, 465 (2005), https://doi.org/10.1002/jps.2026210.1002/jps.20262 ↗
34. 34 O. D. Akin-Ajani, O. A. Itiola and O. A. Odeku, Starch-Starke, 68, 169 (2016), https://doi.org/10.1002/star.20150018810.1002/star.201500188 ↗
35. 35 S. N. Moorthy, Starch/Starke, 54, 559 (2002), https://doi/10.1002/1521-379X(200212)54:12<559::AID-STAR2222559>3.0.CO;2-F10.1002/1521-379X(200212)54:12<559::AID-STAR1111559>3.0.CO;2-N ↗
36. 36 N. Sandler and D. Wilson, J. Pharm. Sci., 99, 958 (2010), https://doi.org/10.1002/jps.2188410.1002/jps.21884 ↗
37. 37 Y. Kudo, M. Yasuda and S. Matsusaka, Adv. Powder Technol., 31, 121 (2020), https://doi.org/10.1016/j.apt.2019.10.00410.1016/j.apt.2019.10.004 ↗
38. 38 G. Thoorens, F. Krier, B. Leclercq, B. Carlin and B. Evrard, Int. J. Pharm., 473, 64 (2014), https://doi.org/10.1016/j.ijpharm.2014.06.05510.1016/j.ijpharm.2014.06.055 ↗
39. 39 T. Hong, J. Yin, S. Nie and M. Xie, Food Chem. X, 12, 100168 (2021), https://doi.org/10.1016/j.fochx.2021.10016810.1016/j.fochx.2021.100168 ↗
40. 40 P. Ek, B. Gu, S. R. Saunders, K. Huber and G. M. Ganjyal, Curr. Res. Food Sci., 4, 588 (2021), https://doi.org/10.1016/j.crfs.2021.07.00110.1016/j.crfs.2021.07.001 ↗
41. 41 S. Pal, D. Mal and R. P. Singh, Carbohyd. Polym., 59, 417 (2005), https://doi:10.1016/j.carbpol.2004.06.04710.1016/j.carbpol.2004.06.047 ↗
42. 42 A. T. Ogunjimi and G. Alebiowu, Powder Technol., 246, 187 (2013), https://doi.org/10.1016/j.powtec.2013.04.05110.1016/j.powtec.2013.04.051 ↗
43. 43 O. A. Odeku and B. L. Akinwande, Saudi Pharm. J., 20, 171 (2012), https://doi.org/10.1016/j.jsps.2011.09.00110.1016/j.jsps.2011.09.001 ↗
44. 44 C. Bilbao-Sainz, J. Bras, T. Williams, T. Senechal and W. Orts, Carbohyd. Polym., 86, 1549 (2011), https://doi.org/10.1016/j.carbpol.2011.06.06010.1016/j.carbpol.2011.06.060 ↗
45. 45 R. W. Heckel, Trans. Met. Soc. AIME, 221, 671 (1961)
46. 46 M. Z. Ahmad, S. Akhter, M. Anwar, M. Rahman, M. A. Siddiqui et al., Powder Technol., 224, 281 (2012), https://doi.org/10.1016/j.powtec.2012.03.00410.1016/j.powtec.2012.03.004 ↗
47. 47 S. Fujisawa, E. Togawa and K. Kuroda, Sci. Technol. Adv. Mater., 18, 959 (2017), https://doi.org/10.1080/14686996.2017.140142310.1080/14686996.2017.1401423 ↗
48. 48 D. Klemm, B. Heublein, H. P. Fink and A. Bohn, Angew. Chem. Int. Ed., 44, 3358 (2005), https://doi.org/10.1002/anie.20046058710.1002/anie.200460587 ↗
49. "