"EFFECT OF PRECOATING ON PROPERTIES OF FUNCTIONAL COATING AND ELECTRICAL CONDUCTIVITY OF INKJET-PRINTED ELECTRONICS"
Source abstract
Abstract
"In the present work, various surface treatments of base paper were investigated in order to make it suitable for application in printed electronics. A functional coating based on silica pigment was preceded by PVOH-containing precoating, and differently surface treated papers were characterized in terms of surface roughness, relative area of surface pores, wettability, printability and by FTIR spectroscopy. The precoating had a significant effect on the constriction of through-pores, the reduction of their number, and on the permeability of the functional coating, and it increased the dynamic contact angle of the liquids. Analysis of FTIR spectra of precoated and functionally coated paper confirmed a higher content of polyvinyl alcohol binder and cationic polymer in the functional coating, compared to that of functionally coated paper, without precoating. SEM analysis showed that the silver layer of the RFID antenna printed by inkjet on the precoated and functionally coated paper was continuous. Better printability of the precoated and functionally coated paper, compared to the functionally coated paper, without precoating, was also confirmed by higher electrical conductivity of the dipole of the RFID antenna, which reached the level of the antenna printed on a commercial inkjet PET film."
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. "1 K. C. Chin, C. H. Tsai, L. C. Chang, C. L. Wei, W. T. Chen et al., in Procs. Printed Circuits Expo. Apex and the Designers Summit, 2008, pp. 1940-1946
2. 2 K. Janeczek, in Procs. XII International PhD Workshop OVD, Poland, 2010, pp. 345-348
3. 3 A. Arazna, K. Janeczek and K. Futera, Circuit World, 43, 9 (2017), https://doi.org/10.1108/CW-10-2016-004710.1108/CW-10-2016-0047 ↗
4. 4 S. Merilampi, L. Ukkonen, L. Sydanheimo, P. Ruuskanen and M. Kivikoski, Int. J. Antennas Propag., 2007, ID 090762 (2007), https://doi.org/10.1155/2007/9076210.1155/2007/90762 ↗
5. 5 A. Rida, Y. Li, R. Vyas and M. M. Tentzeris, IEEE Antennas Propag. Mag., 51, 13 (2009)10.1109/MAP.2009.5251188 ↗
6. 6 V. Lakafosis, A. Rida, R. Vyas, Y. Li, S. Nikolaou et al., in Procs. IEEE, October 2010, 98, 1601 (2010), https://doi.org/10.1109/JPROC.2010.204962210.1109/JPROC.2010.2049622 ↗
7. 7 J. Xi, H. Zhu and T. T. Ye, in Procs. 2011 IEEE International Conference on RFID, pp. 38-44, https://doi.org/10.1109/RFID.2011.576463410.1109/RFID.2011.5764634 ↗
8. 8 R. Zichner and R. R. Baumann, in Procs. LOPE-C 2011, Messe Frankfurt, Germany, pp. 361-363
9. 9 T. Ӧhlund and M. Andersson, in Procs. LOPE-C 2012, January 2012, pp. 115-119
10. 10 R. Bollström and M. Toivakka, in Procs. 15th Fundamental Research Symposium, Cambridge, UK, September 2013, pp. 945-966
11. 11 U. Kavčič, M. Pivar, M. Dokič, D. G. Svetec, L. Pavlovič et al., Mater. Technol., 48, 261 (2014)
12. 12 H. He, L. Sydänheimo, J. Virkki and L. Ukkonen, Int. J. Antennas Propag., 2016, ID 9265159 (2016), https://doi.org/10.1155/2016/926515910.1155/2016/9265159 ↗
13. 13 F. C. Loghin, A. Falco, A. Albrecht, J. F. Salmeron, M. Becherer et al., ACS Appl. Mater. Interfaces, 10, 34683 (2018), https://doi.org/10.1021/acsami.8b0805010.1021/acsami.8b08050 ↗
14. 14 P. Zhu, Y. Liu, Z. Fang, Y. Kuang, Y. Zhang et al., Langmuir, 35, 4834 (2019), https://doi.org/10.1021/acs.langmuir.8b0425910.1021/acs.langmuir.8b04259 ↗
15. 15 S. Li, N. Pan, Z. Zhu, R. Li, B. Li et al., Adv. Funct. Mater., 29, 1807343 (2019), https://doi.org/10.1002/adfm.20180734310.1002/adfm.201807343 ↗
16. 16 R. Alrammouz, J. Podlecki, P. Abboud, B. Sorli and R. Habchi, Sens. Actuat. A Phys., 2018, 209 (2018), https://doi.org/10.1016/j.sna.2018.10.03610.1016/j.sna.2018.10.036 ↗
17. 17 X. Wang, M. Zhang, L. Zhang, J. Xu, X. Xiao et al., Mater. Today Commun., 31, 103263 (2022), https://doi.org/10.1016/j.mtcomm.2022.103263610.1016/j.mtcomm.2022.103263 ↗
18. 18 S. Wünscher, R. Abbel, J. Perelaer and U. S. Schubert, J. Mater. Chem. C, 2, 10232 (2014), https://doi.org/10.1039/C4TC01820F10.1039/C4TC01820F ↗
19. 19 M. Schmid, S. Sängerlaub, O. Miesbauer, V. Jost, J. Werthan et al., Polymers, 2014, 2764 (2014), https://doi.org/10.3390/polym611276410.3390/polym6112764 ↗
20. 20 J. Gigac, M. Fišerová, M. Kováč and M. Stankovská, Wood Res., 65, 25 (2020), https://doi.org/10.37763/wr.1336-4561/65.1.02503610.37763/wr.1336-4561/65.1.025036 ↗
21. 21 J. Gigac, M. Fišerová and S. Hegyi, Wood Res., 66, 71 (2021), https://doi.org/10.37763/wr.1336-4561/66.1.718410.37763/wr.1336-4561/66.1.7184 ↗
22. 22 J. Gigac and M. Fišerová, Wood Res., 67, 26 (2022), https://doi.org/10.37763/wr.1336-4561/67.1.264010.37763/wr.1336-4561/67.1.2640 ↗
23. 23 J. Gigac, M. Stankovská, M. Letko and E. Opálená, Wood Res., 59, 717 (2014)
24. 24 J. Gigac, M. Stankovská, M. Fišerová and E. Opálená, Wood Res., 60, 739 (2015)
25. 25 Z. Long, M. Wu, H. Peng, L. Dai, D. Zhang et al., BioResources, 10, 7907 (2015), https://doi.org/10.15376/biores.10.4.7907-7920.10.15376/biores.10.4.7907-7920 ↗
26. 26 U. V. Brodnjak and D. Todorova, J. Polym. Text. Eng., 4, 33 (2017)
27. 27 R. A. Ilyas, S. M. Sapuan, M. R. Ishak, E. S. Zainudin, M. S. N. Atikah et al., in Procs. 6th Postgraduate Seminar on Natural Fiber Reinforced Polymer Composites, Malaysia, December, 2018, pp. 55-59
28. 28 S. Kopacic, A. Walzl, A. Zankel, E. Leitner and W. Bauer, Coatings, 8, 235 (2018), https://doi.org/10.3390/coatings 807023510.3390/coatings ↗
29. 29 J. Gigac, M. Stankovská and M. Fišerová, Wood Res., 63, 871 (2018)
30. 30 R. Sonnier, A. Taguet, L. Ferry and J.-M. Cuesta, "Towards Bio-Based Flame Retardant Polymers", Briefs in Molecular Science, Springer, 1st ed., 2018, pp. 47-5810.1007/978-3-319-67083-6 ↗
31. 31 J. Vida and T. Homola in Procs. 2nd International Conference and Advanced Surface Enhancement (INCASE 2021), Singapore, September 7-8, 2021, pp. 63-67
32. 32 J. Gigac, M. Fišerová and R. Tiňo, Wood Res., 67, 671 (2022), https://doi.org/10.37763/wr.1336-4561/67.4.67168510.37763/wr.1336-4561/67.4.671685 ↗
33. 33 J. Gigac, M. Fišerová, M. Kováč and S. Hegyi, Mater. Technol., 55, 277 (2021)10.17222/mit.2020.184 ↗
34. 34 J. Lemarchand, N. Bridonneau, N. Battaglini, F. Carn, G. Mattana et al., Angew. Chem. Int. Ed., 61, 1 (2022), https://doi.org/10.1002/anie.20220016610.1002/anie.202200166 ↗
35. 35 M. Kasajová and J. Gigac, Nord. Pulp Pap. Res. J., 28, 443 (2013), https://doi.org/10.3183/NPPRJ-2013-28-03-p443-44910.3183/npprj-2013-28-03-p443-449 ↗
36. 36 J. Gigac, M. Kasajová, M. Maholányiová, M. Stankovská and M. Letko, Nord. Pulp Pap. Res. J., 28, 274 (2013), https://doi.org/10.3183/NPPRJ-2013-28-02-p274-28110.3183/npprj-2013-28-02-p274-281 ↗
37. 37 C. M. Dang, K. K. Huynh and D. M. T. Dang, Biol. Chem. Res., 6, 126 (2019)
38. 38 L. Mo, Z. Guo, L. Yang, Q. Zhang, Y. Fang et al., Int. J. Mol. Sci., 20, 2124 (2019), https://doi.org/10.3390/ijms2009212410.3390/ijms20092124 ↗
39. 39 V. Hospodarova, E. Singovszka and N. Stevulova, Am. J. Anal. Chem., 9, 303 (2018), https://doi.org/10.4236/ajac.20189602310.4236/ajac.2018.96023 ↗
40. 40 S. Yenidoğan, Mater. Sci., 26, 317 (2020), https://doi.org/10.5755/j01.ms.26.3.2149910.5755/j01.ms.26.3.21499 ↗
41. 41 S. Jareansin, P. Sukaam and B. Kusuthanm, Polym. Bull., 76 4507 (2019), https://doi.org/10.1007/s00289-018-2603-810.1007/s00289-018-2603-8 ↗
42. 42 A. Hebeish and S. Sharaf, RSC Adv., 5, 103036 (2015), https://doi.org/10.1039/C5RA07076G10.1039/C5RA07076G ↗
43. 43 L. Padhye, Y. Luzinova, M. Cho, B. Mizaikoff, J.-H. Kim et al., Environ. Sci. Technol., 45, 4353 (2015), https://dx.doi.org/10.1021/es104255e10.1021/es104255e ↗
44. 44 M. F. H. Al-Kadhemy, S. A. Ibrahim and J. A. S. Salman, AIP Conf. Procs., 2290, 050013 (2020), https://doi.org/10.1063/5.002881710.1063/5.0028817 ↗
45. 45 R. P. D'Amelia, L. Huang and J. Mancuso, World J. Chem. Ed., 7, 1 (2019), https://doi.org/10.12691/wjce-7-1-110.12691/wjce-7-3-1 ↗
46. 46 X. Lv, Ch. Liu, S. Song, Y. Quiao, Y. Hu et al., RSC Adv., 8, 2941 (2018), https://doi.org/10.1039/c7ra11001d10.1039/C7RA11001D ↗
47. 47 L. Wang, Y. Chen and Z. Zhang, in Procs. 17th IAPRI World Conference on Packaging, 2010, pp. 418-421
48. 48 T. Pirzada, S. A. Arvidson, C. D. Saquinng, S. S. Shah and S. A. Khan, Langmuir, 28, 5834 (2012), https://doi.org/10.1021/la300049j10.1021/la300049j ↗
49. 49 I. Yudovin-Faber, N. Beyth, E. I. Weiss and A. J. Domb, J. Nanopart. Res., 12, 591 (2010), https://doi.org/10.1007/s11051-009-9628-810.1007/s11051-009-9628-8 ↗
50. "