FUTURE CELLULOSE BASED INDUSTRIES IN BANGLADESH – A MINI REVIEW
Source abstract
Abstract
"Lignocellulosic products can contribute to a low carbon economy, which can support in achieving the sustainable development goals of a country. The demand for pulp and paper in the developing world is constantly increasing. Due to environmental awareness, interest in bio-based products is mounting, encouraging the establishment of integrated biorefineries. Bangladesh is facing an acute shortage of fibrous raw materials, as forest resources are limited. This paper provides an overview of the characteristics of raw materials that would be available for pulping to future pulp industries in Bangladesh. Rice straw is the most abundant raw material in Bangladesh, followed by wheat straw. However, both rice and wheat straws contain a very high amount of silica, which restricts their use in pulping. An alternative technology has been developed to overcome the drawbacks of non-wood pulping, where all dissolved biomass fractions are used in the development of bio-based products. "
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Lignin and Wood Chemistry · Advanced Cellulose Research Studies · Biofuel production and bioconversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
"Pulp and Paper Research Division, Bangladesh Council of Scientific and Industrial Research, Dr. Qudrat-i-Khuda Road, Dhaka 1205, Bangladesh "
Department of Chemistry, University of New Brunswick, Fredericton, NB E3B 5A3 Canada
" Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Jiangsu Key Lab of Pulp and Paper Science and Technology, Nanjing Forestry University, Nanjing 210037, China "
References (100+)
Show source-provided references
1. "A. A. Reza and M. K. Hasan, in “Forest Degradation Around the World”, edited by M. N. Suratman, IntechOpen, 2019, https://doi.org/10.5772/intechopen.8624210.5772/intechopen.86242 ↗
2. 2 Y. Yasmi, B. Arts and M. Hoogstra-Klein, 2019, http://www.fao.org/3/ca4627en/ca4627en.pdf
3. 3 FAOSTAT, Food and Agriculture Organization of the Uited Nations. Rome, Italy, 2020, http://www.fao.org/faostat/en/#data/FO
4. 4 FAO, FAO Yearbook of Forest Products, pp. 144-223, available at: http://www.paperonweb.com/FAO2014.Paper.pdf 2014
5. 5 M. Quader, J. Chem. Eng., 26, 41 (2011), https://doi.org/10.3329/jce.v26i1.1018110.3329/jce.v26i1.10181 ↗
6. 6 M. S. Jahan and S. Rawshan, BioResources, 4, 921 (2009), https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_04_3_0921_Reinforcing_Jute_Nalita_Pulps10.15376/biores.4.3.921-931 ↗
7. 7 M. S. Jahan, N. Chowdhury and Y. Ni, Bioresour. Technol., 101, 1892 (2010), https://doi.org/10.1016/j.biortech.2009.10.02410.1016/j.biortech.2009.10.024 ↗
8. 8 M. S. Jahan, M. Sarkar and M. M. Rahman, Drewno, 58, 69 (2015), https://doi.org/10.12841/wood.1644-3985.110.0610.12841/wood.1644-3985.110.06 ↗
9. 9 J. E. Atchison, Tappi J., 79, 87 (1996), https://imisrise.tappi.org/TAPPI/Products/PUL/PULP9591.aspx
10. 10 P. Bajpai, “Pulp and Paper Industry: Chemicals”, Elsevier, 2015, https://www.elsevier.com/books/pulp-and-paper-industry/bajpai/978-0-12-803408-810.1016/b978-0-12-811099-7.00002-2 ↗
11. 11 Z. Liu, H. Wang and L. Hui, in “Pulping and Papermaking of Non-Wood Fibres”, edited by S. N. Kazi, IntechOpen, 2018, https://doi.org/10.5772/intechopen.7901710.5772/intechopen.79017 ↗
12. 12 H. Oinonen and M. Koskivirta, in Procs. Paperex, 4th International Conferences on Pulp and Paper Industry: Emerging Technologies in the Pulp and Paper Industry, December 14-16, 1999, New Delhi, India, p. 49
13. 13 Y. Qi and F. Ning, in Procs. 2nd Forum about Dev. Pulp Pap. Mak. Equipments, Liaocheng, 2013, pp. 29-61
14. 14 China Paper Association, The Annual Report of China’s Paper Industry in 2015, http://zzxx.cnjournals.com/ch/reader/create_pdf.aspx?file_no=201608070&flag=1&journal_id=qgysgy&year_id=2016
15. 15 H. Pande and D. N. Roy, J. Wood Chem. Technol., 16, 311 (1996), https://doi.org/10.1080/0277381960854581110.1080/02773819608545811 ↗
16. 16 M. M. Rahman and M. S. Jahan, Biomass Convers. Biorefin., 4, 53 (2014), https://doi.org/10.1080/0277381960854581110.1007/s13399-013-0095-1 ↗
17. 17 R. A. Parham and H. M. Kaustinen, “Papermaking Materials: An Atlas of Electron Micrographs”, 1974
18. 18 M. S. Jahan, B. Rukhsana, M. M. Baktash, L. Ahsan, P. Fatehi et al., Curr. Org. Chem., 17, 1570 (2013), https://www.ingentaconnect.com/content/ben/coc/2013/00000017/00000015/art0000310.2174/13852728113179990065 ↗
19. 19 T. Radiotis, L. Jian, K. Goel and R. Eisner, Tappi J., 82, 100 (1999)
20. 20 H. R. Ghatak, Tappi J., 1, 24 (2002)
21. 21 A. K. Sharma, D. Dutt, J. Upadhyaya and T. Roy, BioResources, 6, 5062 (2011), https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_06_4_5062_Sharma_DUR_Anatom_MOrph_Chem_Bambusa10.15376/biores.6.4.5062-5073 ↗
22. 22 M. S. Jahan, M. N. Uddin, A. Rahman, M. M.Rahman and M. N. Aminb, Journal of Bioresources Bioproducts, 1, 85 (2016), https://doi.org/10.21967/jbb.v1i2.2810.21967/jbb.v1i1.32 ↗
23. 23 M. Sarker, S. Sutradhar, A. G. Sarwar, M. N. Uddin, S. C. Chanda et al., Journal of Bioresources Bioproducts, 2, 24 (2017), https://doi.org/10.21967/jbb.v2i1.12810.21967/jbb.v2i1.128 ↗
24. 24 M. S. Jahan, M. Rahman and M. M. Rahman, J-FOR, 2, 12 (2012)10.18697/ajfand.51.10600 ↗
25. 25 M. M. Rahman, T. Islam, J. Nayeem and M. Jahan, International Journal of Lignocellulosic Products, 1, 93 (2014), https://ijlp.gau.ac.ir/article_2065_0b17adad879006b91fe737d88123ce00.pdf
26. 26 M. S. Jahan, M. Shamsuzzaman, M. M. Rahman, S. I. Moeiz and Y. Ni, Ind. Crop. Prod., 37, 164 (2012), https://doi.org/10.1016/j.indcrop.2011.11.03510.1016/j.indcrop.2011.11.035 ↗
27. 27 M. S. Jahan, F. Haris, M. M. Rahman, P. R. Samaddar and S. Sutradhar, Bioresour. Technol., 219, 445 (2016), https://doi.org/10.1016/j.biortech.2016.08.00810.1016/j.biortech.2016.08.008 ↗
28. 28 M. S. Jahan, D. N. Chowdhury and M. K. Islam, Bioresour. Technol., 97, 401 (2006), https://doi.org/10.1016/j.biortech.2005.04.00310.1016/j.biortech.2005.04.003 ↗
29. 29 M. S. Jahan, T. Akter, J. Nayeem, P. R. Samaddar and M. Moniruzzaman, J-FOR, 6, 46 (2016)
30. 30 M. S. Jahan, M. Sarkar and M. M. Rahman, Cellulose Chem. Technol., 51, 3 (2017), https://www.cellulosechemtechnol.ro/pdf/CCT3-4(2017)/p.307-312.pdf
31. 31 M. S. Jahan, M. K. Islam, D. N. Chowdhury, S. I. Moeiz and U. Arman, Ind. Crop. Prod., 26, 259 (2007), https://doi.org/10.1016/j.indcrop.2007.03.01410.1016/j.indcrop.2007.03.014 ↗
32. 32 M. S. Jahan, R. Sabina and A. Rubaiyat, Turk. J. Agric. For., 32, 339 (2008), https://journals.tubitak.gov.tr/agriculture/abstract.htm?id=9712
33. 33 B. M. Pejic, M. M. Kostic, P. D. Skundric and J. Z. Praskalo, Bioresour. Technol., 99, 7152 (2008), https://doi.org/10.1016/j.biortech.2007.12.07310.1016/j.biortech.2007.12.073 ↗
34. 34 D. Sitch and H. B. Marshall, Can. J. Res., 28, 376 (1950), https://cdnsciencepub.com/doi/abs/10.1139/cjr50f-03410.1139/cjr50f-034 ↗
35. 35 T. Clark, R. Cunningham and I. Wolff, Tappi J., 54, 63 (1971)
36. 36 M. S. Jahan and S. P. Mun, J. Ind. Eng. Chem., 10, 766 (2004), https://www.cheric.org/research/tech/periodicals/view.php?seq=458447
37. 37 M. S. Jahan, A. Al-Maruf and M. Quaiyyum, Bangladesh J. Sci. Ind. Res., 42, 425 (2007), https://doi.org/10.3329/bjsir.v42i4.75010.3329/bjsir.v42i4.750 ↗
38. 38 T. Ferdous, M. S. Jahan, M. Quaiyyum and M. N. Uddin, Biomass Convers. Biorefin., 10, 289 (2019), https://doi.org/10.1007/s13399-019-00415-310.1007/s13399-019-00415-3 ↗
39. 39 M. F. Andrade, J. L. Colodette, R. C. de Oliveira, C. M. Jardim and H. Jameel, Tappi J., 13, 27 (2014), https://doi.org/10.32964/TJ13.6.2710.32964/TJ13.6.27 ↗
40. 40 D. Fengel, G. Wegener and A. Greune, Wood Sci. Technol., 23, 123 (1989), https://imisrise.tappi.org/TAPPI/Products/14/JUN/14JUN27.aspx10.1007/BF00350934 ↗
41. 41 A. Tutus and H. Eroglu, Journal of the Technical Association of the Australian New Zealand Pulp Paper Industry, 57, 214 (2004), https://search.informit.org/doi/10.3316/INFORMIT.720368708560774
42. 42 S. Cao, X. Ma, L. Lin, F. Huang, L. Huang et al., BioResources, 9, 4528 (2014), https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/481010.15376/biores.9.3.4528-4539 ↗
43. 43 K. Arafat, J. Nayeem, A. Quadery, M. Quaiyyum and M. S. Jahan, Bangladesh J. Sci. Ind. Res., 53, 83 (2018), https://doi.org/10.3329/bjsir.v53i2.3666810.3329/bjsir.v53i2.36668 ↗
44. 44 M. S. Jahan and M. M. Rahman, Carbohyd. Polym., 88, 583 (2012), https://doi.org/10.1016/j.carbpol.2012.01.00510.1016/j.carbpol.2012.01.005 ↗
45. 45 M. S. Jahan, A. Saeed, Y. Ni and Z. He, J. Biobased Mater. Bioenerg., 3, 380 (2009), https://doi.org/10.1166/jbmb.2009.105310.1166/jbmb.2009.1053 ↗
46. 46 G. Goyal, J. Fisher, M. Krohn, R. Packood and J. Olson, Tappi J., 82, 141 (1999), https://imisrise.tappi.org/TAPPI/Products/99/MAY/99MAY141.aspx
47. 47 C. Ververis, K. Georghiou, N. Christodoulakis, P. Santas and R. Santas, Ind. Crop. Prod., 19, 245 (2004), https://doi.org/10.1016/j.indcrop.2003.10.00610.1016/j.indcrop.2003.10.006 ↗
48. 48 H. Kaur and D. Dutt, Cellulose Chem. Technol., 47, 83 (2013), https://cellulosechemtechnol.ro/pdf/CCT1-2(2013)/p.83-94.pdf
49. 49 M. S. Jahan and F. Farouqui, J. Bangladesh Chem. Soc., 14, 1 (2001)
50. 50 M. S. Jahan, Bangladesh J. Sci. Ind. Res., 41, 245 (2006), https://doi.org/10.3329/bjsir.v41i3.29610.3329/bjsir.v41i3.296 ↗
51. 51 P. Khristova, O. Kordsachia, R. Patt, I. Karar and T. Khider, Ind. Crop. Prod., 23, 131 (2006), https://doi.org/10.1016/j.indcrop.2005.05.00210.1016/j.indcrop.2005.05.002 ↗
52. 52 Y. Lei, S. Liu, J. Li and R. Sun, Biotechnol. Adv., 28, 609 (2010), https://doi.org/10.1016/j.biotechadv.2010.05.00910.1016/j.biotechadv.2010.05.009 ↗
53. 53 D. Pasquini, M. T. Pimenta, L. H. Ferreira and A. A. Curvelo, J. Supercrit. Fluid., 34, 125 (2005), https://doi.org/10.1016/j.supflu.2004.11.00510.1016/j.supflu.2004.11.005 ↗
54. 54 F. B. de Oliveira, J. Bras, M. T. B. Pimenta, A. A. da Silva Curvelo and M. N. Belgacem, Ind. Crop. Prod., 93, 48 (2016), https://doi.org/10.1016/j.indcrop.2016.04.06410.1016/j.indcrop.2016.04.064 ↗
55. 55 H. Abou-Yousef, M. El-Sakhawy and S. Kamel, Ind. Crop. Prod., 21, 337 (2005), https://doi.org/10.1016/j.indcrop.2004.05.00110.1016/j.indcrop.2004.05.001 ↗
56. 56 M. S. Jahan, S. Islam, M. Moniruzzaman and M. Quaiyyum, Bangladesh J. Sci. Ind. Res., 51, 247 (2016), https://doi.org/10.3329/bjsir.v51i4.3044110.3329/bjsir.v51i4.30441 ↗
57. 57 M. S. Jahan, Z. Z. Lee and Y. Jin, Turk. J. Agric. For., 30, 231 (2006), https://journals.tubitak.gov.tr/agriculture/abstract.htm?id=8347
58. 58 M. S. Jahan, D. N. Chowdhury, M. K. Islam and M. S. Islam, Cellulose Chem. Technol., 41, 137 (2007), https://www.cellulosechemtechnol.ro/
59. 59 S. Sutradhar, M. Sarkar, J. Nayeem, M. S. Jahan and C. Tian, Bangladesh J. Sci. Ind. Res., 53 (1), 1 (2018), https://doi.org/10.3329/bjsir.v53i1.3590310.3329/bjsir.v53i1.35903 ↗
60. 60 A. Rodríguez, A. Moral, L. Serrano, J. Labidi and L. Jiménez, Bioresour. Technol., 99, 2881 (2008), https://doi.org/10.1016/j.biortech.2007.06.00310.1016/j.biortech.2007.06.003 ↗
61. 61 M. González, L. Canton, A. Rodriguez and J. J. Labidi, Bioresour. Technol., 99, 6621 (2008), https://doi.org/10.1016/j.biortech.2007.12.03810.1016/j.biortech.2007.12.038 ↗
62. 62 M. S. Jahan and Z. He, J. Bioresour. Bioprod., 3, 1 (2018), http://jbb.xml-journal.net/cn/article/doi/10.21967/jbb.v3i1.165
63. 63 H. Q. Lam, Y. Le Bigot and M. Delmas, Ind. Crop. Prod., 14, 65 (2001), https://doi.org/10.1016/S0926-6690(00)00089-310.1016/S0926-6690(00)00089-3 ↗
64. 64 M. S. Jahan, M. M. Rahman, S. Sutradhar and M. Quaiyyum, Nord. Pulp Pap. Res. J., 30, 562 (2015), https://doi.org/10.3183/npprj-2015-30-04-p562-56710.3183/npprj-2015-30-04-p562-567 ↗
65. 65 S. Sutradhar, K. Y. Arafat, J. Nayeem and M. S. Jahan, Cellulose Chem. Technol., 54, 463 (2020), https://doi.org/10.35812/CelluloseChemTechnol.2020.54.4710.35812/CelluloseChemTechnol.2020.54.47 ↗
66. 66 H. Liu, H. Hu, M. S. Jahan and Y. Ni, Bioresour. Technol., 131, 315 (2013), https://doi.org/10.1016/j.biortech.2012.12.15810.1016/j.biortech.2012.12.158 ↗
67. 67 K. Tanifuji, S. Takahashi, K. Shiell, M. S. Jahan, Y. Ni et al., BioResources, 8, 3912 (2013), https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/374810.15376/biores.8.2.2417-2428 ↗
68. 68 P. R. Patwardhan, R. C. Brown and B. H. Shanks, ChemSusChem, 4, 636 (2011), https://doi.org/10.1002/cssc.20100042510.1002/cssc.201000425 ↗
69. 69 R. E. E. G. Ana and A. A. A. Sokan, Int. J. Sustain. Green Energ., 4, 141 (2015), https://doi.org/10.11648/j.ijrse.20150404.13
70. 70 M. S. Ganewatta, H. N. Lokupitiya and C. Tang, Polymers, 11, 1176 (2019), https://doi.org/10.3390/polym1107117610.3390/polym11071176 ↗
71. 71 G. Huang, J. X. Shi and T. A. Langrish, Bioresour. Technol., 98, 2829 (2007), https://doi.org/10.1016/j.biortech.2006.09.02910.1016/j.biortech.2006.09.029 ↗
72. 72 G. L. Huang, J. X. Shi and T. A. Langrish, J. Clean. Prod., 16, 1287 (2008), https://doi.org/10.1016/j.jclepro.2007.06.01110.1016/j.jclepro.2007.06.011 ↗
73. 73 R. Sun, J. Tomkinson and J. Bolton, Separ. Sci. Technol., 34, 3045 (1999), https://doi.org/10.1081/SS-10010082110.1081/SS-100100821 ↗
74. 74 M. Sarkar, C. Tian and M. S. Jahan, Tappi J., 17, 63 (2018), https://imisrise.tappi.org/TAPPI/Products/18/FEB/18FEB63.aspx10.32964/TJ17.02.63 ↗
75. 75 H. Chang, Pulp Pap., 54, 87 (1980)10.2307/40134540 ↗
76. 76 I. Croon and S. Larsson, Pulp Pap. Int., 25, 52 (1983)
77. 77 M. S. Jahan, Y. Ni and Z. He, BioResources, 5, 870 (2010), https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_05_2_0870_Jahan_NH_ClO2_Bleach_NaAQ_Jute10.15376/biores.5.2.870-880 ↗
78. 78 L. Viikari, A. Kantelinen, J. Sundquist and M. Linko, FEMS Microbiol. Rev., 13, 335 (1994), https://doi.org/10.1111/j.1574-6976.1994.tb00053.x10.1111/j.1574-6976.1994.tb00053.x ↗
79. 79 Y. Ziaie-Shirkolaee, A. Talebizadeh and S. Soltanali, Bioresour. Technol., 99, 7433 (2008), https://doi.org/10.1016/j.biortech.2008.02.03210.1016/j.biortech.2008.02.032 ↗
80. 80 K. K. Wong, S. L. Nelson and J. N. Saddler, J. Biotechnol., 48, 137 (1996), https://doi.org/10.1016/0168-1656(96)01502-710.1016/0168-1656(96)01502-7 ↗
81. 81 T. Higuchi, ACS Symp. Series, 399, 482 (1989), https://doi.org/ 10.1021/bk-1989-0399.ch03510.1021/bk-1989-0399.ch035 ↗
82. 82 S. Camarero, O. Garcıa, T. Vidal, J. Colom, J. C. del Rıo et al., Enzyme Microb. Technol., 35, 113 (2004), https://doi.org/10.1016/j.enzmictec.2003.10.01910.1016/j.enzmictec.2003.10.019 ↗
83. 83 C. Valls and M. B. Roncero, Bioresour. Technol., 100, 2032 (2009), https://doi.org/10.1016/j.biortech.2008.10.00910.1016/j.biortech.2008.10.009 ↗
84. 84 C. Sigoillot, E. Record, V. Belle, J. L. Robert, A. Levasseur et al., Appl. Microbiol. Biotechnol. Adv., 64, 346 (2004), https://doi.org/10.1007/s00253-003-1468-310.1007/s00253-003-1468-3 ↗
85. 85 C. Sigoillot, S. Camarero, T. Vidal, E. Record, M. Asther et al., J. Biotechnol., 115, 333 (2005), https://doi.org/10.1016/j.jbiotec.2004.09.00610.1016/j.jbiotec.2004.09.006 ↗
86. 86 K. E. LeJeune, J. S. Swers, A. D. Hetro, G. P. Donahey and A. J. Russell, Biotechnol. Bioeng., 64, 250 (1999)10.1002/(sici)1097-0290(19990720)64:2<250::aid-bit14>3.0.co;2-9 ↗
87. 87 P. Bajpai and P. K. Bajpai, Tappi J., 79, 225 (1996), https://doi.org/10.1002/(SICI)1097-0290(19990720)64:2<250::AID-BIT14>3.0.CO;2-910.1002/(SICI)1097-0290(19990720)64:2<250::AID-BIT14>3.0.CO;2-9 ↗
88. 88 S. Chauhan, B. Choudhury, S. Singh and P. Ghosh, Process Biochem., 41, 226 (2006), https://doi.org/10.1016/j.procbio.2005.06.00310.1016/j.procbio.2005.06.003 ↗
89. 89 B. L. Zamost, H. Nielsen and K. Starnes, J. Ind. Microbiol., 8, 71 (1991), https://doi.org/10.1007/BF0157875710.1007/BF01578757 ↗
90. 90 A. Garg, J. Roberts and A. McCarthy, Enzyme Microb. Technol., 22, 594 (1998), https://doi.org/10.1016/S0141-0229(97)00250-010.1016/S0141-0229(97)00250-0 ↗
91. 91 I. D. Reid and M. G. Paice, FEMS Microbiol. Rev., 13, 369 (1994), https://doi.org/10.1111/j.1574-6976.1994.tb00056.x10.1111/j.1574-6976.1994.tb00056.x ↗
92. 92 P. Bajpai, Crit. Rev. Biotechnol., 24, 1 (2004), https://doi.org/10.1080/0738855049046581710.1080/07388550490465817 ↗
93. 93 M. S. Jahan, A. Rubaiyat and R. Sabina, J. Sci. Ind. Res., 66, 853 (2007), http://nopr.niscair.res.in/handle/123456789/1328
94. 94 S. Roth and A. C. Spiess, Bioprocess Biosystem. Eng., 38, 2285 (2015), https://doi.org/10.1007/s00449-015-1475-710.1007/s00449-015-1475-7 ↗
95. 95 M. Sharyo, H. Shimoto, H. Sakaguchi, M. Isaji, Y. Fujita et al., Japan Tappi J., 47, 1223 (1993), https://doi.org/10.2524/jtappij.47.122310.2524/jtappij.47.1223 ↗
96. 96 N. Gil, C. Gil, M. E. Amaral, A. P. Costa and A. P. Duarte, Biochem. Eng. J., 46, 89 (2009), https://doi.org/10.1016/j.bej.2009.04.01110.1016/j.bej.2009.04.011 ↗
97. 97 C. K. Lee, I. Darah and C. O. Ibrahim, Bioresour. Technol., 98, 1684 (2007), https://doi.org/10.1016/j.biortech.2006.05.05210.1016/j.biortech.2006.05.052 ↗
98. 98 M. Shafi, A. Akhtaruzzaman and A. J. Mian, Holzforschung, 47, 83 (1993), https://doi.org/10.1515/hfsg.1993.47.1.8310.1515/hfsg.1993.47.6.491 ↗
99. 99 M. S. Jahan, S. Gosh, M. M. Rahman and Y. Ni, Tappi J., 12, 41 (2013), https://imisrise.tappi.org/TAPPI/Products/13/SEP/13SEP41.aspx10.32964/TJ12.9.41 ↗
100. 100 P. Labosky and G. Ifju, Wood Fibre Sci., 13, 120 (2007), https://wfs.swst.org/index.php/wfs/article/view/1701