Deformation of porous fibrous TiNi materials
Source abstract
Abstract
The paper examines the strain of porous fibrous TiNi materials resulting from the shape memory effect. The most intensive growth of green compacts in heating is observed at 35 to 50°C and stops at 90°C. It is shown that the strain reaches 250% for fibrous TiNi compacts; the porosity thus increases by a factor of 1.4 to 1.8. It is established that flexible-rigid particulate bonds and shape memory effect in combination cause a manifold increase in the strain as compared with powder TiNi or fibrous tungsten. Sintered materials showed mainly the effect of superelasticity. The total shape recovery is close to 100% at a strain of 10 to 20% and sharply decreases at a strain greater than 30%. The most probable cause is the Ti4Ni2Ox phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser and Thermal Forming Techniques · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. A. G. Kostornov, N. E. Fedorova, and L. I. Chernyshev, “Sintering behavior of porous parts from metal fibers,” Powder Metall. Met. Ceram., 20, No. 11, 763–765 (1981).10.1007/BF00796473 ↗
2. V. G. Pushin, V. V. Popov, T. É. Kuntsevich, et al., “Rapidly quenched shape memory TiNiCo alloys. I. Martensitic transformations and mechanical properties,” Fiz. Met. Metalloved., 91, No. 4, 54–62 (2001).
3. V. G. Pushin, N. I. Kourov, T. É. Kuntsevich, et al., “Structure and properties of rapidly quenched shape memory TiNiFe alloys. I. Microstructure and phase composition of starting austenite,” Fiz. Met. Metalloved., 92, No. 1, 63–67 (2001).
4. V. G. Pushin, S. B. Volkova, N. M. Matveeva, et al., “Structural and phase transformations in TiNi-TiCu quasibinary alloys rapidly quenched from the melt. V. Effect of thermal treatment,” Fiz. Met. Metalloved., 83, No. 6, 157–162 (1997).
5. G. G. Zak, G. Z. Zatulskii, and K.-Kh. Yakh, “Liquid quenching of shape memory aluminum bronze, ” Protsessy Lit’ya, No. 2, 80–84 (1998).
6. E. Z. Vintaikin, G. I. Nosova, and V. D. Plakhtii, “Structure and properties of melt-quenched Mn-Cu-Cr reversible shape memory alloy band,” Metalloved. Term. Obrab. Met., No. 10, 31–34 (1998).
7. V. A. Vasil’ev, B. S. Mitin, I. N. Pashkov, et al., High-Speed Melt Solidification [in Russian], Moscow (1998), p. 400.
8. N. V. Tereshin, “Melt extraction for producing titanium nickelide fibers,” Izv. Vuzov. Tsvet. Metall., No. 1, 38–41 (2000).
9. D. B. Chernov, Structural Application of Shape Memory Alloys [in Russian], Moscow (1999), p. 232.
10. X. L. Meng, K. T. Lau, I. M. Zhou, et al., “Design and stability of shape memory alloys springs subjected to a constant axial load,” J. Mat. Sci. Techn., 11, No. 1, 23–33 (2003).
11. V. N. Antsiferov, F. F. Bezdudnyi, L. N. Belyanchikov, et al., New Materials [in Russian], Mosk. Inst. Stali i Splavov, Moscow (2002), p. 736.
12. I. F. Martynova, V. V. Skorokhod, S. M. Solonin, and G. R. Fridman, “Superplastic behavior of powdered titanium nickelide during pressing,” Powder Metall. Met. Ceram., 24, No. 2, 102–105 (1985).10.1007/BF00799709 ↗
13. A. G. Kostornov, Materials Science of Disperse and Porous Metals and Alloys [in Russian], Vol. 1, Naukova Dumka, Kiev (2002), p. 571.
14. V. N. Zhuravlev and V. G. Pushin, Thermomechanical Memory Alloys and Their Application in Medicine [in Russian], Ekaterinburg (2000), p. 150.