journal article·2014-07

Expansion on radomyselskii’s Ideas in the Development of Current Processes for Producing Structural Powder Parts

Yu. G. Dorofeev, G. A. Baglyuk, V. Yu. Dorofeev, A. V. Babets

Powder Metallurgy and Metal Ceramics· Volume 53· Issue 3-4
Publisher page

Abstract

The basic scientific trends of studies conducted over many years under the leadership of I. D. Radomyselskii are considered. It is shown that most of them are still relevant. The main areas and prospects of expanding on these ideas today are presented.
The source flagged this abstract for review. Check formulas and completeness against the original publication.
Source: openaire · Quality: needs review · Source record ↗
Source flags: short_text

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. I. D. Radomyselskii, Developing the Process for Producing Iron Powders by Scale Reduction with Natural Dashava Gas in Muffle Furnaces [in Russian], Author’s Abstract of PhD Thesis, Inst. Chern. Metall., Kiev (1954), p. 19.
2. A. K. Gaiduchenko, Development and Examination of Reducing Annealing of Raw Atomized Powder under the Magnetic Field [in Russian], Author’s Abstract of PhD Thesis, Inst. Probl. Materialoved. AN USSR, Kiev (1985), p. 29.
3. G. G. Serdyuk and L. I. Chernyshev, “Development of powder metallurgy in Belarus,” in: 59 Years of Powder Metallurgy in Belarus. History, Progress, and Prospects [in Russian], Minsk (2010), pp. 47–59.
4. I. D. Radomyselskii, V. S. Pugin, V. A. Kutnyak, et al., “Standard powder metallurgy processes,” Poroshk. Metall., No. 3, 93–96 (1985).
5. I. D. Radomyselskii and S. G. Napara-Volgina, Production of Alloyed Powders by Diffusion Method and Their Use [in Russian], Nauka, Kiev (1988), p. 136.
6. I. D. Radomyselskii, G. G. Serdyuk, and N. I. Shcherban’, Structural Powder Materials [in Russian], Tekhnika, Kiev (1985), p. 152.
7. I. D. Radomyselskii, “Structure and properties of constructional sintered materials,” Powder Metall. Met. Ceram., 13, No. 4, 286–292 (1974).10.1007/BF00796802 ↗
8. B. Lindqvist, “Chromium alloyed steels—a new powder generation,” in: Proc. Congress & Exhibition Euro PM-2001, European Powder Metallurgy Association (2001), Vol. 1, p. 13–21.
9. R. Oro, M. Campos, Ch. Gierl, et al., “Atmosphere effects on liquid phase sintering of PM steels modified with master alloy additions,” in: Proc. Congress & Exhibition World PM–2010, European Powder Metallurgy Association (2010), Vol. 2, pp. 275–282.
10. D. Chasoglou, E. Hryha, and L. Nyborg, “Effect of process parameters on surface oxides on chromiumalloyed steel powder during sintering,” Mater. Chem. Phys., 138, No. 1, 405–415 (2013).10.1016/j.matchemphys.2012.11.074 ↗
11. Ming-Wei Wu, Lung-Chuan Tsao, and Shih-Ying Chang, “The influences of chromium addition and quenching treatment on the mechanical properties and fracture behaviors of diffusion-alloyed powder metal steels,” Mater. Sci. Eng. A, 565, 196–202 (2013).10.1016/j.msea.2012.12.032 ↗
12. V. N. Antsiferov, V. B. Akimenko, and L. M. Grevnov, Alloyed Powder Steels [in Russian], Metallurgiya, Moscow (1991), p. 318.
13. Höganäs AB, The PoP Centre. Primed to Help You Imagine New Possibilities, 0299HOG, December (2012), p. 36.
14. G. A. Baglyuk, L. A. Sosnovskii, V. I. Vol’fman, and A. I. Khomenko, “Sintered manganese steels produced using copper-bearing ferromanganese master alloy,” Powder Metall. Met. Ceram., 49, No. 9–10, 594–597 (2010).
15. G. A. Baglyuk, L. A. Sosnovskii, and V. I. Vol’fman, “Effect of carbon content on the properties of sintered steels doped with manganese and copper,” Powder Metall. Met. Ceram., 50, No. 3–4, 189–193 (2011).10.1007/s11106-011-9317-x ↗
16. S. G. Napara-Volgina, V. A. Maslyuk, and L. N. Orlova, “Economically alloyed manganese-containing powder structural steels. Composition, preparation conditions, and properties,” Powder Metall. Met. Ceram., 44, No. 3–4, 123–128 (2005).10.1007/s11106-005-0069-3 ↗
17. G. A. Baglyuk, S. G. Napara-Volgina, L. O. Sosnovskii, et al., Method of Producing Sintered Manganese- Alloyed Steels [in Ukrainian], Ukrainian Patent 200133 for Utility Model Bulletin No. 1, publ. January 15 (2007).
18. L. A. Sosnovskii, O. V. Vlasova, G. A. Baglyuk, and M. E. Golovkova, “Effect of manganese silicide on the sintering and properties of powder steels,” Visn. Skhidnoukr. Nats. Univ. V. Dalya, No. 12 (166), Part 1, 207–214 (2011).
19. Höganäs Iron and Steel Powders for Sintered Components: Handbook, Höganäs (2001).
20. Hoeganaes Corporation. Data Sheet. 0613-AS4300A-D-1, p. 3, http://www.gkn.com/hoeganaes/media/ Brochures.
21. Atomet 4701, Rio Tinto, p. 10, http://qmp-powders.com/rtecontent/document/ATOMET_4701-Brochure . pdf.
22. I. D. Radomyselskii, G. G. Serdyuk, E. L. Pechentkovskii, and S. G. Napara-Volgina, “Production of constructional engineering components from porous preforms by hot forging,” Powder Metall. Met. Ceram., 18, No. 12, 893–896 (1979).10.1007/BF00815649 ↗
23. KOBELCO: Atomized Steel Powder, Kobe Steel Ltd., Japan, October (2000), p. 30.
24. Ch. Schade, T. Murphy, A. Lawley, and R. Doherty, “The influence of silicon on the mechanical properties and hardenability of PM steels,” in: Advances in Powder Metallurgy & Particulate Mater, Vol. 2, Part 7, Metal Powder Industries Federation, p. 19 (2013), [ http://www.gkn.com/hoeganaes/media/news/ Documents/Paper%20-2013%20%20SchadeMurphyLawley%20 and%20Doherty.pdf].
25. A. K. Grabchak, E. L. Pechentkovskii, et al., “Hot bulk forging of iron powder parts,” in: Sintered Structural Materials [in Russian], Inst. Probl. Materialoved. AN USSR, 29–32 (1976).
26. I. D. Radomyselskii, D. S. Yas’, and V. I. Pavlenko, Production and Use of Powder Parts in Light Industry [in Russian], Tekhnika, Kiev (1982), p. 175.
27. R. Z. Vlasyuk, Studying the Structurization Processes during Sintering of Metal/Glass Materials [in Russian], Author’s Abstract of PhD Thesis, Kiev (1972), p. 29.
28. I. D. Radomyselskii and N. I. Shcherban’, Znanie USSR, Kiev (1983), p. 16.
29. G. Baglyuk, “Properties and structure of sintered boron containing carbon steels,” in: V. Shatokha (ed.), Sintering―Methods and Products, InTech Publisher (2012), pp. 249–266.10.5772/34267 ↗
30. H. Y. Suzuki, “Effect of boron on alloying and pore morphology in PM carbon steel,” J. Jpn. Soc. Powder Metall., 49, No. 7, 600–606 (2002).10.2497/jjspm.49.600 ↗
31. S. G. Napara-Volgina, G. A. Baglyuk, and V. K. Kud’, “Specific features of various methods for boron doping of structural powder steels,” Metalloznav. Obrob. Met., No. 4, 16–21 (2008).
32. S. G. Napara-Volgina, G. A. Baglyuk, V. K. Kud’, and D. O. Bakhonskii, “Mechanical properties and structure of carbon powder steels with boron,” Metalloznav. Obrob. Met., No. 2, 11–15 (2009).
33. S. G. Napara-Volgina, G. A. Baglyuk, L. M. Orlova, et al., “Structure and properties of sintered iron–boron–carbon alloys with different carbon contents,” Powder Metall. Met. Ceram., 50, No. 1–2, 67–72 (2011).10.1007/s11106-011-9304-2 ↗
34. Yu. S. Borisov, V. E. Oliker, E. A. Astakhov, et al., “Structure and properties of gas-thermal coatings of Fe–B–C and Fe–Ti–B–C alloys,” Powder Metall. Met. Ceram., No. 4, 26, 313–318 (1987).10.1007/BF01184439 ↗
35. I. M. Spiridonova, E. V. Sukhovaya, V. F. Butenko, et al., “Structure and properties of boron-bearing iron granules for composites,” Powder Metall. Met. Ceram., 32, No. 2, 139–141 (1993).10.1007/BF00560039 ↗
36. A. V. Dovydenkova and I. D. Radomyselskii, “Production and properties of constructional parts from copper and copper alloy powders. A review,” Powder Metall. Met. Ceram., 21, No. 3, 196–203 (1982).10.1007/BF00791682 ↗
37. I. D. Radomyselskii, G. A. Baglyuk, and G. E. Mazharova, “Production and properties of brass-base P/M constructional materials. A review,” Powder Metall. Met. Ceram., 23, No. 3, 218–225 (1984).10.1007/BF00791806 ↗
38. G. E. Mazharova, “Structural titanium-based powder materials,” in: Powder Materials [in Russian], Inst. Probl. Materialoved. AN USSR, Kiev (1983), pp. 77–83.
39. G. E. Mazharova, G. A. Baglyuk, and A. V. Dovydenkova, Production of Parts from Nonferrous Metal Powders [in Russian], Tekhnika, Kiev (1989), p. 120.
40. I. D. Radomyselskii, V. A. Dovydenkov, A. V. Dovydenkova, et al., “Methods of producing aluminum powder alloys,” Poroshk. Metall., No. 6, 82–90 (1984).
41. N. I. Shcherban’ and A. A. Skal’chuk, “Structural magnesium-based powder materials,” in: Powder Materials [in Russian], Inst. Probl. Materialoved. AN USSR, Kiev (1983), pp. 43–51.
42. I. D. Radomyselskii and S. G. Napara-Volgina, “Structure and mechanical and corrosion properties of Kh13 stainless steel powders,” Powder Metall. Met. Ceram., 21, No. 6, 460–464 (1982).10.1007/BF00801755 ↗
43. I. D. Radomyselskii and S. G. Napara-Volgina, “Structure and mechanical and corrosion properties of P/M Kh23N18 stainless steel,” Powder Metall. Met. Ceram., 22, No. 1, 39–44 (1983).10.1007/BF00792511 ↗
44. S. G. Napara-Volgina, E. V. Venglovskaya, and L. M. Apininskaya, “Properties of sintered austenitic stainless steels based on different raw materials,” Powder Metall. Met. Ceram., 30, No. 9, 747–752 (1991).10.1007/BF00794213 ↗
45. S. G. Napara-Volgina, “Properties of hot-forged high chromium stainless steels,” Powder Metall. Met. Ceram., 30, No. 8, 648–652 (1991).10.1007/BF01172040 ↗
46. F. Martin, C. Garcia, and Y. Blanco, “Effect of chemical composition and sintering conditions on the mechanical properties of sintered duplex stainless steels,” Mater. Sci. Eng., 528, Issue 29–30, 8500–8511 (2011).10.1016/j.msea.2011.08.013 ↗
47. L. A. Dobrzanski, Z. Brytan, M. A. Grande, et al., “Properties of vacuum sintered duplex stainless steels,” J. Mater. Process. Technol., 162–163, 286–292 (2005).10.1016/j.jmatprotec.2005.02.038 ↗
48. Yu. G. Dorofeev, Dynamic Hot Pressing of Porous Materials [in Russian], Nauka, Moscow (1968), p. 122.
49. Yu. G. Dorofeev, B. G. Gasanov, V. Yu. Dorofeev, et al., Industrial Technology of Powder Hot Pressing [in Russian], Metallurgiya, Moscow (1990), p. 206.
50. H. A. Kuhn and B. L. Ferguson, Powder Forging, MPIF, Princeton, New Jersey (1990), p. 270.
51. Yu. G. Dorofeev, O. G. Klimenko, V. N. Mishchenko, et al., “Dynamic hot pressing at the Rostselmash factory,” Powder Metall. Met. Ceram., 20, No. 6, 437–441 (1981).10.1007/BF00815796 ↗
52. V. N. Klimenko, S. G. Napara-Volgina, L. N. Orlova, et al., “Mechanical and tribological properties of wear-resistant hot-compacted steels with a heterogeneous structure,” Powder Metall. Met. Ceram., 32, No. 3, 226–229 (1993).10.1007/BF00559754 ↗
53. S. S. Kiparisov, O. A. Popov, B. Yu. Dorofeev, and V. L. Ésikman, “Structural material based on ShKh-15 steel chips produced by hot forging,” Podship. Prom., No. 12, 12–16 (1983).
54. Yu. G. Dorofeev, A. K. Petrov, A. G. Tsipunov, et al., “Structure and properties of sintered R18 steel,” Powder Metall. Met. Ceram., 12, No. 2, 132–135 (1973).10.1007/BF00807776 ↗
55. G. A. Baglyuk, “Hot forming of powder high-speed steels,” Powder Metall. Met. Ceram., 44, No. 9–10, 426–428 (2005).10.1007/s11106-006-0003-3 ↗
56. G. A. Baglyuk, I. D. Martyukhin, T. M. Pavlygo, et al., “Hot forging of carbide steels,” in: Collected Scientific University Papers (Engineering Mechanics) [in Ukrainian], Lutsk (2007), Issue 20, pp. 14–19.
57. E. V. Khomenko, G. A. Baglyuk, and R. V. Minakova, “Effect of deformation processing on the properties of Cu–50% Cr composite,” Powder Metall. Met. Ceram., 48, No. 3–4, 211–215 (2009).10.1007/s11106-009-9108-9 ↗
58. I. D. Radomyselskii, “Use of powder metallurgy methods for the manufacture of constructional machine components and ways of extending the range of P/M parts employed in the machine and tool industries,” Powder Metall. Met. Ceram., 19, No. 11, 800–804 (1980).10.1007/BF00793474 ↗
59. V. A. Dovydenkov, “Powder metallurgy in the Republic of Mari El,” in: Proc. Sci. Sem. New Materials and Articles from Metal Powders. Technology. Production. Application (TPP-PMM 2005) [in Russian], Yoshkar-Ola (2005), pp. 11–13.
60. V. T. Koftelev, “40 years of powder metallurgy at the Volga Motorcar Works,” in: Proc. Sci. Sem. New Materials and Articles from Metal Powders. Technology. Production. Application (TPP-PMM 2011) [in Russian], Yoshkar-Ola (2011), pp. 166–168.
61. A. V. Dovydenkova, E. V. Sergeeva, and M. V. Yarmolyk, “Development and production of sinterhardening powder steels,” in: Proc. Sci. Sem. New Materials and Articles from Metal Powders. Technology. Production. Application (TPP-PMM 2005) [in Russian], Yoshkar-Ola (2005), pp. 105–108.
62. V. A. Dymchenko and I. D. Radomyselskii, “Chromium cermet materials with increased hardness,” in: Structural Cermet Materials [in Russian], Inst. Probl. Materialoved. AN USSR, Kiev (1972), pp. 15–17.
63. Yu. G. Dorofeev, A. V. Ganshin, A. V. Babets, et al., “Development and implementation of powder and composite materials and their products,” in: Proc. Int. Sci. Conf. within Industrial Congress of the South of Russia on Effective Processes in Metallurgy, Engineering and Tool Making [in Russian], Rostov-on-Don (2007), pp. 109–112.
64. F. Klocke, Ch. Gordels, and Ph. Kauffmann, “Plasticity of PM materials,” in: Proc. Int. Powder Metallurgy Congress & Exhibition EURO PM–2008, European Powder Metallurgy Association (2008), Vol. 3, pp. 267–279.
65. S. Erxleben, “Powder forging—process and equipment for the path towards full density,” in: Proc. Int. Powder Metallurgy Congress & Exhibition EURO PM-2008, European Powder Metallurgy Association (2008), Vol. 3, pp. 295–300.
66. S. G. Napara-Volgina, I. D. Radomyselskii, and M. L. Gorb, “Properties of materials produced from chromium and chromium–nickel steel powders,” in: Sintered Structural Materials [in Russian], Inst. Probl. Materialoved. AN USSR, Kiev (1974), pp. 92–97.
67. I. D. Radomyselskii, A. I. Dzyubenko, A. P. Lyapunov, and A. A. Mamonova, “High-strength carbon steels with hereditary fine crystal structure I. The effect of vibrogrinding on the parameters of the fine structure of iron powder particles,” Powder Metall. Met. Ceram., 25, No. 6, 483–487 (1986).10.1007/BF00792385 ↗
68. I. D. Radomyselskii, A. I. Dzyubenko, and A. P. Lyapunov, “High-strength carbon steels with hereditary finely crystalline structure,” Powder Metall. Met. Ceram., 25, No. 9, 737–741 (1986).10.1007/BF00797304 ↗
69. Yu. G. Dorofeev, V. Yu. Dorofeev and I. A. Kosobokov, “Structure and properties of heat-resistant steels obtained from powders after mechanical activation,” Powder Metall. Met. Ceram., 41, No. 11–12, 593–598 (2002).10.1023/A:1022932219718 ↗
70. I. D. Radomyselskii, Yu. V. Mil’man, Yu. N. Ivashchenko, et al., “Segregation of impurity elements in porous iron,” Powder Metall. Met. Ceram. 25, No. 3, 254–258 (1986).10.1007/BF00794980 ↗
71. B. Yu. Dorofeev, V. Yu. Dorofeev, Yu. N. Ivashchenko, et al., “Formation of properties and interparticular concrescence of hot-formed powder materials,” Powder Metall. Met. Ceram., 29, No. 10, 789–794 (1990); 29, No. 12, 956–959 (1990); 30, No. 2, 118–123 (1991).
72. V. Yu. Dorofeev and Kh. S. Kochkarova, “Effect of aluminum microadditives on the structure and mechanical properties of carbon hot-rolled powder steels,” in: Proc. 9th Int. Sci. Conf. New Materials and Technologies: Powder Metallurgy, Composite Materials Protective Coatings, and Welding [in Russian], Inst. Poroshk. Metall. GNPO PM, Minsk (2010), pp. 49–51.
73. V. Yu. Dorofeev and Kh. S. Kochkarova, “Hot forging of iron powder materials with microadditives of sodium and calcium,” in: Proc. Sci. Sem. New Materials and Articles from Metal Powders. Technology. Production. Application (TPP-PMM 2011) [in Russian], Yoshkar-Ola (2011), pp. 109–114.
74. A. F. Il’yushchenko, E. S. Sevast’yanov, and P. N. Kireev, “Highly dense powder steels and processes for making complex structural parts,” in: 50 years of Powder Metallurgy in Belarus. History, Advances, and Prospects [in Russian], Minsk (2010), pp. 218–229.
75. GOST 29278-92, Powder Articles, Structural Elements, General Requirements, IPK Izdatel’stvo Standartov, Moscow (2004), p. 7.
76. Yu. G. Dorofeev, A. E. Kushchevskii, G. G. L’vova, et al., “Principles of standardization of the articles of complex shape produced by the methods of powder metallurgy,” Powder Metall. Met. Ceram., 31, No. 8, 721–726 (1992).10.1007/BF00797824 ↗