journal article·2013-05

The structurization and properties of Fe–Cr–C alloys with a liquid phase vanishing during sintering

N. P. Brodnikovskii, A. A. Mikhailov, P. V. Mazur, K. S. Chirik, A. V. Samelyuk, M. S. Tkachenko, S. A. Firstov

Powder Metallurgy and Metal Ceramics· Volume 52· Issue 1-2
Publisher page

Abstract

The possibility of increasing the wear resistance and bending strength of Fe–Cr–C alloys with a high chromium carbide content produced by powder metallurgy methods is studied. Regularities of the structurization and mechanical properties of the alloys are determined in relation to their composition and production conditions. The conditions of sintering and the composition of the alloys with a high chromium carbide content ensuring high abrasive wear resistance, which is 1.5 times greater than that of VK8 alloy, are found. The structure of the alloy represents a fine-grained chromium carbide composite formed at a certain amount of a liquid phase vanishing during sintering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. V. N. Klimenko, V. A. Maslyuk, and Yu. V. Sambros, “Sintering, structurization, and properties of powdered materials of the system chromium carbide–iron,” Powder Metall. Met. Ceram., 25, No. 8, 642–646 (1986).10.1007/BF00796731 ↗
2. R. Z. Vlasyuk, A. N. Gripachevskii, and I. D. Radomysel’skii, “Changes in the chemical and phase compositions of a Cr3C2 particle in contact with an iron matrix during sintering,” Powder Metall. Met. Ceram., 23, No. 8, 597–602 (1984).10.1007/BF00796623 ↗
3. V. N. Klimenko, S. G. Napara-Volgina, L. N. Orlova, et al., “Mechanical properties of heterogeneousstructure wear-resistant high-chromium powder materials,” Powder Metall. Met. Ceram., 35, No. 11–12, 630–635 (1996).10.1007/BF01513048 ↗
4. S. G. Napara-Volgina, L. N. Orlova, and A. K. Skuratovskii, “Corrosion and tribotechnical properties of materials based on Kh18N15 stainless steels with MoS2 and Cr3C2 additives,” Powder Metall. Met. Ceram., 38, No. 1–2, 58–63 (1999).10.1007/BF02675884 ↗
5. S. G. Napara-Volgina, L. N. Orlova, A. A. Mamonova, and V. P. Dzeganovskii, “Structure formation processes in sintering of stainless-steel-base heterophase materials. I. Sintering of austenitic stainless-steelbase materials with additions of Cr3C2,” Powder Metall. Met. Ceram., 36, No. 1–2, 93–100 (1997).10.1007/BF02684259 ↗
6. V. A. Maslyuk and S. G. Napara-Volgina, “Wear-resistant and corrosion-resistant carbide-steel-type materials having different matrices,” Powder Metall. Met. Ceram., 38, No. 9–10, 521–525 (1999).10.1007/BF02676072 ↗
7. O. A. Bannykh, P. B. Budberg, S. P. Alisova, et al., Phase Diagrams of Binary and Multicomponent Iron Systems: Handbook [in Russian], Metallurgiya, Moscow (1986), p. 440.
8. P. A. Savintsev and K. A. Getazheev, “On steady-state contact melting,” Izv. Akad. Nauk SSSR. Met., No. 1, 224–229 (1971).
9. V. P. Chepeleva, “Structure formation in a chromium carbide alloy of eutectic type during sintering,” Powder Metall. Met. Ceram., 21, No. 8, 647–650 (1982).10.1007/BF00795521 ↗
10. R. V. Yakovenko, V. A. Maslyuk, G. A. Baglyuk, et al., “Tribological and mechanical properties of wearresistant composites based on corrosion-resistant steels,” in: Proc. 2nd Int. Samson. Conf. Materials Science of Refractory Compounds [in Russian], Kiev (2010), pp. 122–130.
11. V. S. Rakovskii, “Cermets and surfacing alloys,” in: Mechanical Engineering Handbook [in Russian], Vol. 6, Mashinostroenie, Moscow (1964), pp. 411–420.
12. M. M. Khrushchov and M. A. Babichev, Abrasive Wear [in Russian], Nauka, Moscow (1970), p. 252.
13. G. V. Samsonov and I. M. Vinnitskii, Refractory Compounds [in Russian], Metallurgiya, Moscow (1978), p. 558.