Effect of current pulse frequency on the structure and properties of electric-spark alloyed coatings of the Ti - Al - N system
Source abstract
Abstract
The mass transfer kinetics, composition, structure, and properties of coatings, formed by high-frequency electric-spark alloying of 45 and 40X steels with the Ti - Al (3:1, 1:1, 1:3) intermetallics and TiN - AIN (1:1) nitride were studied as a function of the current pulse frequency(ν = 1200 and 1600 Hz). A decrease in ν was found to lead to a higher mass transfer coefficient and higher microhardness and Young’s modulus of the coating as well. This is due to the decrease in the Ti/Al ratio on the surface. The phase composition of intermetallic and nitride coatings differed only insignificantly and did not depend on the value of ν. The main phases of the coatings were Fe - Ti - O and Al - Ti - O solid solutions. The nitride and intermetallic coatings had similar friction coefficients f and wear rates I (f = 0.26 and 0.28, I = 5.4 and 5.9 µm/km), despite the difference in their structure. We can assume that the coating phase composition which defines the composition of the secondary structure under dry friction, is the main factor controlling tribological behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Coatings · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. “Heat treating and coatings,” Adv. Mat. Proc., 153, No.4, 16 (1998).
2. A. D. Verkhoturov, I. A. Podchernyaeva, and F. F. Egorov, Electrode Materials for Electric Spark Alloying [in Russian], Nauka, Moscow (1988).
3. V. A. Kim, D. N. Korotaev, and A. V. Golik, “Effect of the conditions of electrospark treatment on the erosion process,” Fiz. Khim. Obrab. Mater., No. 1, 78–81 (2001).
4. “Drill coatings bring cost benefits,” Metalwork. Prod., 143, No.10, T47 (1999).
5. J. Y. Ranch, Ch. Rousselot, N. Martin, et al., “Characterization of (Ti1 − x Alx)N films prepared by radio frequency reactive magnetron sputtering,” J. Europ. Ceram. Soc., 20, 795–799 (2000).10.1016/S0955-2219(99)00200-9 ↗
6. A. Ravikiran, “Effect of interface layers formed during dry sliding of zirconia toughened alumina against steel,” Wear, 171, 129–134 (1994).10.1016/0043-1648(94)90345-X ↗
7. E. T. Mamykin and A. I. Yuga, “Set of machines and methods for determining the antifriction properties under sliding friction,” Poroshk. Metall., No. 1, 62–67 (1973).
8. B. A. Galanov, O. N. Grigor’ev, Yu. V. Mil’man, and I. P. Ragozin, “Determination of the hardness and Young’s modulus from the depth of penetration of a pyramidal indenter,” Probl. Prochnosti, No. 11, 93–96 (1983).