journal article·2008-07

Thermodynamic analysis of gaseous phase equilibrium compositions in producing iron-and cobalt-based alloys by diffusion saturation from point sources. II. Calculation of the thermodynamic characteristics of chemical processes in cobalt-based mixtures with different content of chromium

S. P. Gordienko, S. G. Napara-Volgina, V. A. Maslyuk

Powder Metallurgy and Metal Ceramics· Volume 47· Issue 7-8
Publisher page

Abstract

The paper presents a thermodynamic analysis of chemical equilibrium in Co-Cr-Ni-Mo alloys with different chromium content (10, 20, and 30%) produced by point-source diffusion saturation under 0.1 MPa at 500–1500 K. The elements of the alloys are most likely transported by lower chloride molecules participating in cyclic reactions. The limiting concentration of chromium above which no changes occur in either gaseous or condensed phase is 20%. It is experimentally established that chromium rapidly diffuses into the cobalt base, accompanied by the formation of homogeneous alloy powders, under the actual nonequilibrium conditions for the production of cobalt alloy powders containing more than 20% of chromium.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (2)

Show source-provided references
1. S. P. Gordienko, S. G. Napara-Volgina, and V. A. Maslyuk, “Thermodynamic analysis of gaseous phase equilibrium compositions in producing iron-and cobalt-based alloys by diffusion saturation from point sources. I. Calculation of thermodynamic characteristics of chemical processes in mixtures of iron or cobalt with chromium, nickel, or molybdenum,” Powder Metall. Met. Ceram., 47, No. 5–6, 121–127 (2008).
2. V. A. Maslyuk, S. G. Napara-Volgina, L. N. Orlova, et al., “Properties of cobalt-chromium alloy powders to be used in prosthetic dentistry,” in: Proc. Int. Conf. on Modern Science of Materials: Achievements and Problems (September 25–30, 2005, Kiev), Kiev (2005), p. 338.