MECHANICAL AND PHYSICAL PROPERTIES OF BIOCOMPOSITES FOR FURNITURE AND THERMAL INSULATION

University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,; WADAH MOHAMMED; ZEINAB OSMAN; University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,; SALAH ELARABI; Institute of Engineering Research and Materials Technology (IERMT), National Center for Research (NCR), Ministry of Higher Education and Scientific Research, Khartoum, 11111, Sudan; JÉRÉMY MEHATS; University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,; BERTRAND CHARRIER; University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,

doi:10.35812/cellulosechemtechnol.2024.58.32

journal article·2024-05-15Open access

MECHANICAL AND PHYSICAL PROPERTIES OF BIOCOMPOSITES FOR FURNITURE AND THERMAL INSULATION

University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,, WADAH MOHAMMED, ZEINAB OSMAN, University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,, SALAH ELARABI, Institute of Engineering Research and Materials Technology (IERMT), National Center for Research (NCR), Ministry of Higher Education and Scientific Research, Khartoum, 11111, Sudan, JÉRÉMY MEHATS, University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,, BERTRAND CHARRIER, University of Pau and the Adour Region, E2S UPPA, CNRS, Institute of Analytical Sciences and Physico-Chemistry for the Environment and Materials-Xylomat,

Cellulose Chemistry and Technology· Volume 58· Issue 3-4

Publisher page Open full text

Source abstract

Abstract

The objective of this work was to evaluate the performance of three natural fibers, namely, bagasse, kenaf bast fibers and cotton stalk, to produce particleboard suitable for application in green furniture and thermal insulation, using tannins and casein as natural matrices at the concentration of 15%. The particleboards were tested according to the relevant European standards to determine their mechanical properties, physical properties and thermal conductivity. The results showed that particleboards made from bagasse fibers and cotton stalks with casein adhesives exhibited higher mechanical performance and complied with European standards for board used for furniture and interior fitments. The particleboards prepared using tannins failed to satisfy the EN standards. All particleboards met the thermal conductivity requirements of the European standards.

Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references

1. "1 H. A. M Saeed, Y. Liu, L. A. Lucia and H. Chen, BioResources, 123, 5212 (2017), https://doi.10.15376/biores.12.3.5212-5222

2. 2 A. Gumowska, E. Robles and G. Kowaluk, Materials, 14, 7718 (2021), https://doi.org/10.3390/ma1424771810.3390/ma14247718 ↗

3. 3 G. A. Holt, P. Chow, J. D. Wanjura, G. M. Pelletier and T. C. Wedegaertner, Ind. Crop. Prod., 52, 627 (2014), https://doi.org/10.1016/j.indcrop.2013.11.00310.1016/j.indcrop.2013.11.003 ↗

4. 4 L. S. Hua, L. W. Chen, B. J. Geng, L. Krišťák, P. Antov et al., J. Mater. Res. Technol., 20, 4630 (2022), https://doi.10.1016/j.jmrt.2022.08.166

5. 5 E. Archanowicz, G. Kowaluk, W. Niedzinski and P. Beer, BioResources, 8, 6220 (2013), https://doi.10.15376/biores.8.4.6220-623010.15376/biores.8.4.6220-6230 ↗

6. 6 S. Halvarsson, H. Edlund and M. Norgren, Ind. Crop. Prod., 29, 437 (2009), https://doi.org/10.1016/j.indcrop.2008.08.00710.1016/j.indcrop.2008.08.007 ↗

7. 7 M. Baharoǧlu, G. Nemli, B. Sari, S. Bardak and N. Ayrilmiş, Compos. Part B Eng., 43, 2448 (2012), https://doi.org/10.1016/j.compositesb.2011.10.02010.1016/j.compositesb.2011.10.020 ↗

8. 8 A. A. Owodunni, J. Lamaming, R. Hashim, O. F. A. Taiwo, M. H. Hussin et al., Polym. Compos., 41, 4448 (2020), https://doi.org/10.1002/pc.2574910.1002/pc.25749 ↗

9. 9 J. J. Nunes de Oliveira, D. L. F. Perissé, N. S. Tonini, D. Souza, S. N. Monteiro et al., J. Mater. Res. Technol., 23, 1084 (2023), https://doi.10.1016/j.jmrt.2023.01.06710.1016/j.jmrt.2023.01.067 ↗

10. 10 A. Wronka and G. Kowaluk, Materials, 15, 8487 (2022), https://doi.org/10.3390/ma1523848710.3390/ma15238487 ↗

11. 11 B. Ndiwe, A. Pizzi, R. Danwe, B. Tibi, N. Konai et al., Eur. J. Wood Wood Prod., 77, 1221 (2019), https://doi.org/10.1007/s00107-019-01460-510.1007/s00107-019-01460-5 ↗

12. 12 N. Konai, A. Pizzi, R. Danwe, M. Lucien and K. T. Lionel, J. Adhes. Sci. Technol., 35, 1492 (2021), https://doi.org/10.1080/01694243.2020.185061110.1080/01694243.2020.1850611 ↗

13. 13 P. V. Dhawale, S. K. Vineeth, R. V. Gadhave, F. M. J. Jabeen, M. V. Supeka et al., Mater. Adv., 3, 3365 (2022), https://doi.10.1039/d1ma00841b10.1039/D1MA00841B ↗

14. 14 A. Mahieu, A. Vivet, C. Poilane and N. Leblanc, Int. J. Adhes. Adhes., 107, 102847 (2021), https://doi.org/10.1016/j.ijadhadh.2021.10284710.1016/j.ijadhadh.2021.102847 ↗

15. 15 Wusigale, L. Liang and Y. Luo, Trends Food Sci. Technol., 97, 391 (2020), https://doi.org/10.1016/j.tifs.2020.01.02710.1016/j.tifs.2020.01.027 ↗

16. 16 N. D. V. Raydan, L. Leroyer, B. Charrier and E. Robles, Molecules, 26, 7617 (2021), https://doi.10.3390/molecules2624761710.3390/molecules26247617 ↗

17. 17 A. C. De Almeida, V. A. De Araujo, E. A. M. Morales, M. Gava, R. A. Munis et al., BioResources, 12, 7784 (2017), https://doi.10.15376/biores.12.4.7784-779210.15376/biores.12.4.7784-7792 ↗

18. 18 G. Kowaluk, M. Zajac, F. Czubak and R. Auriga, IForest, 10, 70 (2017), https://doi.10.3832/ifor1963-00910.3832/ifor1963-009 ↗

19. 19 A. Gumowska, A. Wronka, P. Borysiuk, E. Robles, C. Sala et al., BioResources, 13, 8089 (2018), https://doi.10.15376/biores.13.4.8089-809910.15376/biores.13.4.8089-8099 ↗

20. 20 T. C. Chiang, M. S. Osman and S. Hamdan, Int. J. Sci. Res., 3, 1375 (2014), https://www.ijsr.net/getabstract.php?paperid=SUB14678

21. 21 A. Nourbakhsh, J. Reinf. Plast. Compos., 29, 481 (2010), https://doi:10.1177/073168440809777110.1177/0731684408097771 ↗

22. 22 A. Forrest, M. Hilton, A. Ballinger and D. Whittaker, Report for the European Environment Bureau (EEB), 2017, https://eeb.org/library/circular-economy-opportunities-in-the-furniture-sector/

23. 23 S. Shahril, A. Mohammad, B. S. Anuar and H. Oskar, Environment-Behaviour Proceedings Journal, 5, SI1 (2020), https://doi.org/10.21834/ebpj.v5iSI1.230410.21834/ebpj.v5iSI1.2304 ↗

24. 24 L. Hong and K. Wen, Sustainability, 13, 13652 (2021), https://doi.org/10.3390/su13241365210.3390/su132413652 ↗

25. 25 S. N. D. Sukri, H. Shaharudin, M. A. Ahmad and W. N. Faaizah, Int. J. INTI, 22, 105 (2018), https://ir.uitm.edu.my/id/eprint/53372

26. 26 M. G. Nyang, A. M. Muumbo and C. M. M. Ondieki, Int. J. Compos. Mater., 9, 1 (2019), https://doi.10.5923/j.cmaterials.20190901.01

27. 27 F. M. S. Brito, G. B. Júnior and P. G Surdi, Rev. Bras. Ciencias Agrar., 16, (2021), https://doi:10.5039/agraria.v16i1a878310.5039/agraria.v16i1a8783 ↗

28. 28 K. Kadja, M. Banna, K. E. Atcholi and K. Sanda, Am. J. Appl. Sci., 8, 318 (2011), https://doi.org/10.3844/ajassp.2011.318.32210.3844/ajassp.2011.318.322 ↗

29. 29 F. Brito, G. Bortoletto Jr. and P. Surdi, Braz. J. Agric. Sci., 16, 1 (2021), https://doi.10.5039/agraria.v16i1a878310.5039/agraria.v16i1a8783 ↗

30. 30 A. Essam, E. Mohamed, M. Samir E. Ahmed and A. Ragab, Egypt. J. Chem., 62, 1 (2019), https://doi.10.21608/ejchem.2018.5413.1479(2018)

31. 31 L. Prasittisopin and K. Li, Compos. Part A, 41, 1447 (2010), https://doi.org/10.1016/j.compositesa.2010.06.00610.1016/j.compositesa.2010.06.006 ↗

32. 32 K. Hülya and N. Gökay, Ind. Crop. Prod., 24, 2 (2006), https://doi.org/10.1016/j.indcrop.2006.03.01110.1016/j.indcrop.2006.03.011 ↗

33. 33 X. Chen, H. Liu, N. Xia, J. Shang, V. C. Tran et al., BioResources, 10, 3736 (2015), https://doi.10.15376/biores.10.2.3736-374810.15376/biores.10.2.3736-3748 ↗

34. 34 M. T. Paridah, A. H. Juliana, A. Zaidon and H. P. S. Abdul Khalil, Curr. For. Rep., 1, 221 (2015), https://doi.org/10.1007/s40725-015-0023-710.1007/s40725-015-0023-7 ↗

35. 35 W. G. Escobar, Thesis, Washington State University, 2008, https://cmec.wsu.edu/documents

36. 36 J. A. Halip, L. S. Hua, M. P. Tahir, S. S. Al Edrus, M. S. M. Ishak et al., Int. J. Recent Technol. Eng., 8, 464 (2019), https://doi.10.35940/ijrte.B1090.0782S419

37. 37 M. Guo and G. Wang, Polymers, 8, 324 (2016), https://doi.org/10.3390/polym809032410.3390/polym8090324 ↗

38. 38 A. Moubarik, H. R. Mansouri, A. Pizzi, F. Charrier, A. Allal et al., Wood Sci. Technol., 47, 675 (2013), https://doi.org/10.1007/s00226-012-0525-410.1007/s00226-012-0525-4 ↗

39. 39 S. Pujari, T. Venkatesh and H. Seeli, J. Inst. Eng. India D, 99, 51 (2018), https://doi.10.1007/s40033-017-0146-z(2017)10.1007/s40033-017-0146-z ↗

40. 40 S. Sair, A. Oushabi, A. Kammouni, O. Tanane, Y. Abboud et al., Case Stud. Constr. Mater., 8, 203 (2018), https://doi.org/10.1016/j.cscm.2018.02.00110.1016/j.cscm.2018.02.001 ↗

41. 41 K. Mani and S. Rajakumar, Ind. Eng. J., 13, 3 (2020), https://doi.10.26488/IEJ.13.3.1224

42. 42 R. S. Olivito, O. A. Cevallos and A. Carrozzini, Mater. Des., 57, 258 (2014), https://doi.org/10.1016/j.matdes.2013.11.02310.1016/j.matdes.2013.11.023 ↗

43. 43 S. Chakraborty, S. P. Kundu, A Roy, B. Adhikari and S. B. Majumder, Ind. Eng. Chem. Res., 52, 1252 (2013), https://doi:10.1021/ie300607r10.1021/ie300607r ↗

44. 44 Z. Osman, A. Pizzi and I. H. Alamin, J. Biobased Mater. Bioenerg., 3, 275 (2009), https://doi.10.1166/jbmb.2009.103410.1166/jbmb.2009.1034 ↗

45. 45 Z. Osman, J. Polym. Environ., 21, 41100 (2013), https://doi.10.1007/s10924-013-0611-110.1007/s10924-013-0611-1 ↗

46. 46 C. Vachon, H. L. Yu, R. Yefsah, R. Alain, D. St-Gelais et al., J. Agric. Food Chem., 48, 3202 (2000), https://doi.10.1021/jf991055r10.1021/jf991055r ↗

47. 47 E. S. Abd El-Sayed, M. El-Sakhawy, S. Kamel, A. El-Gendy and R. E. Abou-Zeid, Egypt. J. Chem., 62, 1177 (2019), https://doi.10.1021/jf991055r

48. 48 P. Sahu and M. Gupta, J. Ind. Text., 51, 7480S (2022), https://doi.10.1177/15280837209744244910.1177/1528083720974424 ↗

49. 49 M. T. Paridah, A. H. Juliana, Y. A. El-Shekeil, M. Jawai and O. Y. Alothman, Meas. J. Int. Meas. Confed., 56, 70 (2014), https://doi.org/10.1016/j.measurement.2014.06.01910.1016/j.measurement.2014.06.019 ↗

50. 50 L. Peng, Y. Chuanmin, L. Mengyao and W. Yueqi, BioResources, 15, 6714 (2020), https://doi.org/10.1016/j.measurement.2014.06.01910.1016/j.measurement.2014.06.019 ↗

51. 51 O. Shinji, T. Hitoshi and N. Ryusuke, J. Soc. Mater. Sci. Japan, 51, 1164 (2002), https://doi.org/10.2472/jsms.51.116410.2472/jsms.51.1164 ↗

52. 52 D. T. Liu, K. F. Xia, R. D. Yang, J. Li, K. F. Chen et al., J. Compos. Mater., 46, 1011 (2012), https://doi.org/10.1177/002199831141406910.1177/0021998311414069 ↗

53. "