journal article·2005-11

Influence of silicide coatings on the mechanical properties of the NT-50 alloy

P. I. Glushko, V. I. Savchenko, V. F. Trofimov, B. M. Shirokov

Powder Metallurgy and Metal Ceramics· Volume 44· Issue 11-12
Publisher page

Abstract

We have investigated the effect of silicide coatings on the ultimate strength of NT-50 alloy over the temperature range −196...+1100 °C. From 196 to 800 °C the ultimate strength of silicidated specimens was lower than that of the initial and annealed alloy whereas from 900 °C it was slightly higher. We have also examined the effect of silicide coatings on the relative elongation of NT-50 alloy samples. Over the temperature range −196...+1100 °C, the relative elongation of specimens annealed in a vacuum of 6.7 · 10−3 Pa at 1250 °C for 4 h was found to be lower than that of the silicidated specimens. This is attributed to the dissolution of the residual gases (O2, N2, H2, CO, and CO2) under vacuum annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (6)

Show source-provided references
1. Yu. V. Dzyadykevich and L. I. Kitskai, “Protecting niobium and tantalum from high-temperature corrosion,” Poroshk. Metall., Nos. 1–2, 85–92 (1997).10.1007/BF02684257 ↗
2. V. I. Zmii, N. F. Kartsev, and I. A. Snezhko, “Investigating the process of the formation of silicide coatings on NT-50 niobrium-titanium alloy and their corrosion resistance,” Fiz. Khim. Obr. Mater., No. 6, 79–82 (1989).
3. É. M. Lazarev, L. A. Mokhova, and V. F. Shestova, “Interaction of Cr-Ti-S coatings on VN-3 niobium alloy in air,” Fiz. Khim. Obr. Mater., No. 6, 94–97 (1985).
4. É. M. Lazarev and Z. I. Kornilova, “Silicide coatings to protect titanium-niobium alloys from high-temperature oxidation,” Fiz. Khim. Obr. Mater., No. 2, 96–98 (1985).
5. V. I. Zmii, P. I. Glushko, and V. F. Trofimov, “Influence of NaCl activator on the diffusion parameters that characterize the tungsten vacuum silicidation process,” Izv. Akad. Nauk SSSR. Neorg. Mater., 17, No. 4, 644–646 (1981).
6. É. M. Lazarev, “X-ray spectum microanalysis of oxidized layers and coatings on niobium titanium and tungsten alloys,” in: Crystal Structure of Metal Alloys [in Russian], Nauka, Moscow (1978).