journal article·2003-01

Mechanico-Chemical Synthesis, Structure and Properties of Alloys Based on the System Ti ― Al

Valerii E. Oliker

Powder Metallurgy and Metal Ceramics· Volume 42· Issue 1-2
Publisher page

Abstract

The kinetics of structure and phase formation in Ti ― Al and Ti ― Al ― Sc alloy powders in the process of mechano-chemical synthesis from elemental powders was investigated. It was established that the formation of microdimensional x-ray amorphous composite particles with nanodimensional structural components occurs. It was shown that in consolidation of the mechanically alloyed powders by hot isostatic pressing structural heredity is realized, and that the materials produced have unusually high microhardness compared to that of similar cast alloys. This is characteristic of nanostructured materials. In addition to high hardness the materials are characterized by high work of plastic deformation at room temperature. Microalloying the alloy powders with scandium has a complex positive effect on the strength properties of the hot pressed materials, due to the formation of a dispersion hardened microstructure with purified nanodimensional grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. F. H. Froes, C. Suryanarayana, and D. Eliezer, “Synthesis, properties and application of titanium aluminides,” J. Mat. Sci., 27, 5113–5140 (1992).10.1007/BF02403806 ↗
2. D. M. Dimiduk, “Gamma titanium aluminide alloys an assessment within the competition of aerospace structural materials,” Mat. Sci. Eng., A263, 281–299 (1999).10.1016/S0921-5093(98)01158-7 ↗
3. W. Smarsly and L. Singheiser, “Potential of intermetallics to replace superalloys for advanced operating conditions in gas turbines,” J. Mat. Adv. Power Eng. (1994), Part 11, pp. 1731–1756.
4. Y. W. Kim, “Effect of microstructure on the deformation and fracture of γ-Ti-–Al alloys,” J. Mat. Sci. Eng., A192/193, 519–533 (1995).10.1016/0921-5093(94)03271-8 ↗
5. E. Kampre, P. Sadler, L. Cyristodoulou, and D. E. Larsen, “Room temperature strength and deformation of TiB2-reinforced near-titanium aluminides,” J. Metall. Mat. Trans. A, 25A, 2181–2196 (1994).10.1007/BF02652319 ↗
6. V. E. Oliker, V. I. Trefilov, V. S. Kresanov, and T. Ya. Gridasova, “Effect of scandium and chromium on the structure and heat resistance of alloys based on γ-Ti-–Al,” Poroshk. Metall., Nos. 9–10, 77–88 (2000).
7. F. H. Froes, C. Surynarayana, K. Russell, and C. G. Li, “Synthesis of intermetallics by mechanical alloying,” J. Mat. Sci. Eng., A192/193, 612–623 (1995).
8. T. F. Grigor'eva, F. P. Barinova, and N. Z. Lyakhov, “Mechanochemical synthesis of intermetallic compounds,” Uspekhi Khimii, 70, No. 1, 52–76 (2001).
9. R. G. Rowe and S. C. Huang, Israel J. Tech., 24, 255 (1988).
10. V. V. Skorokhod, “Topical problem in the theory of technological processes for the nanostructured materials preparation. Functional gradient materials and surface layers prepared by fine particles technology,” NATO Science Series II. Mathematics, Physics and Chemistry, 16, 225–237 (2000).
11. V. V. Skorokhod, “Sintering powder materials by electrothermic plasma and laser heating,” in: Suchasne Materialoznavstvo XXI storichchya, Nauk. Dumka, Kiev (1998), pp. 228–248.
12. X-ray diffraction data cards, ASTM (1975).
13. S. I. Bulychev, V. P. Alekhin, and A. P. Ternovskii, “Determination of the mechanical properties of materials by the method of continuous impression of an indentor,” Fiz. Khim. Obrab. Mater., 2, 58–63 (1976).
14. Yu. V. Mil'man, “New techniques for the micromechanical testing of materials by the method of local impressiom of a rigid indentor,” Suchasne Materialoznavstvo XXI Ctorichchya, Nauk. Dumka, Kiev (1998), pp. 637–656.
15. Yu. V. Milman, B. A. Galanov, and S. I. Chugunova, “Plasticity characteristric obtained through hardness measurement,” Acta Metall. Mat., 41, No. 9, 2523–2532 (1993).10.1016/0956-7151(93)90122-9 ↗
16. A. P. Shpak and A. B. Mel'nik, “On the question of micro-heterogeneous structure of disordered metallic systems,” Suchasne Materialoznavstvo XXI Storichchya, Nauk. Dumka, Kiev (1998), pp. 433–446.
17. F. J. J. Van Loo and G. D. Riek, “Diffusion in the titanium-aluminum system. II. Interdiffusion between solid Al and Ti or Ti-Al alloys,” Acta Metall., 21, No. 1, 61–71 (1973).10.1016/0001-6160(73)90220-4 ↗
18. F. J. J. Van Loo and G. D. Riek, “Diffusion in the titanium-aluminum system. II. Interdiffusiion in rthe compposition range between 25–100 at.% Ti,” Acta Metall., 21, No. 1 (1973), pp. 73–84.10.1016/0001-6160(73)90221-6 ↗
19. O. M. Ivasishin, A. N. Demidik, and D. G. Savvakin, “Use of titanium hydride for the synthesis of titanim aluminides from powder materials,” Poroshk. Metall., Nos. 9–10, 632–69 (1999).
20. C. F. Yolton and J. P. Beckman, “Powder metallurgy processing and properties of the ordered orthorhombic alloy Ti-22 at.% Al-23 at.% Nb," J. Mat. Sci. Eng., A192/193, 597–603 (1995).10.1016/0921-5093(94)08283-9 ↗
21. C. Huang and M. N. Loretto, “The microstructure and creep behavior of Ti-25Al-10Nb-3V-1Mo (super α2),” J. Mat. Sci. Eng., A192/193, 722–728 (1995).10.1016/0921-5093(94)03293-9 ↗
22. I. M. Fedorchenko, I. N. Frantsevich, and I. D. Radomysel'skii, Powder Metallurgy. Materials, Technology,Fields of Application, Handbook [in Russian], Nauk. Dumka, Kiev (1985).
23. A. P. Gulyaev, Metal Science [in Russian], Metallurgiya, Moscow (1977).
24. V. V. Skorokhod and L. I. Tuchinskii, “Plasticiti conditions of porous bodies,” Poroshk. Metall., No. 11, 83–87 (1978).
25. V. V. Skorokhod, Yu. M. Solonin, and I. A. Uvarova, Chemical, Diffusional and Rheological Processes in theTechnology of Powder Materials [in Russian], Nauk. Dumka, Kiev (1990).
26. V. V. Skorokhod, “Some problems in the technology of production, investigation, structure and properties of materials,” in: Nanostructured Materials [in Russian], Sb. Nauch. Tr., Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, Kiev (1998).