Interaction of (Ti, Cr)B2-Based Composites with a Nickel Alloy
Source abstract
Abstract
The paper examines how the Ni–Zr–Cr alloy wets (Ti, Cr)B2, AlN, (Ti, Cr)B2–AlN, and AlN–(TiB2–TiSi2) refractory materials. The wetting of (Ti, Cr)B2 leads to near-zero contact angles. The introduction of AlN additions deteriorates wetting of the refractory materials by the nickel alloy, and the Ni–Zr–Cr alloy does not wet pure aluminum nitride. There is insignificant diffusion of Zr to (Ti, Cr)B2 in contact of the alloy with the refractory materials. There is no interaction in the AlN–(Ni–Zr–Cr) system. The composite materials are promising for use in contact with high-temperature corrosive alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. G. V. Samsonov, L. Ya. Markovsky, A. F. Zhygach, and M. G. Valyashko, Boron and Its Compounds and Alloys [in Russian], Izd. AN USSR, Kyiv (1960), p. 590.
2. V. P. Konoval, V. Zh. Shemet, B. Grushko, et al., “Structure and properties of titanium–chromium diboride composites,” Powder Metall. Met. Ceram., 51, Nos. 7–8, 429–436 (2012).10.1007/s11106-012-9452-z ↗
3. T. S. R. Ch. Murthy, J. K. Sonber, C. Subramanian, et al., “Densification, characterization and oxidation studies of (TiCr)B2 + 20% MoSi2,” Int. J. Refract. Met. Hard Mater., 37, 12–28 (2013).10.1016/j.ijrmhm.2012.10.006 ↗
4. A. P. Umansky, V. P. Konoval, A. D. Panasyuk, and E. P. Dvornik, “Contact interaction of double titanium and chromium diboride with Fe–Cr alloys,” Powder Metall. Met. Ceram., 46, Nos. 1–2, 90–94 (2007).10.1007/s11106-007-0014-8 ↗
5. A. P. Umansky, E. P. Pugachevska, and V. P. Konoval, “Studying the contact interaction of titanium–chromium diboride with Ni–Cr alloys,” Adgez. Raspl. Paika Mater., No. 41, 44–52 (2008).
6. A. P. Umansky, A. D. Panasyuk, and V. P. Konoval, “Interaction of titanium–chromium diboride with Fe–Ni alloys,” Adgez. Raspl. Paika Mater., No. 39, 28–39 (2006).
7. V. D. Oreshkin, A. D. Panasyuk, and M. S. Borovikova, “Studying binary titanium and chromium diboride with ferroalloys,” in: Wear-Resistant Cladding Materials Based on Refractory Compounds: Collected Papers [in Russian], Naukova Dumka, Kyiv (1977), pp. 33–39.
8. M. S. Storozhenko, “Effect of molybdenum additions on the structurization of Fe–Mo alloys and contact interaction in the TiB2–(Fe–Mo) systems,” Powder Metall. Met. Ceram., 55, Nos. 9–10, 617–624 (2016).
9. A. E. Terentiev, V. P. Krasovsky, M. S. Storozhenko, et al., “Studying the wetting of zirconium, titanium and chromium borides and titanium carbide with a nickel-based self-fluxing alloy,” Adgez. Raspl. Paika Mater., No. 45, 79–86 (2012).
10. G. V. Samsonov, A. D. Panasyuk, and G. K. Kozina, “Effect of silicon, molybdenum, chromium, and tin additions on the adhesion in the (Ti, Cr)B2–cupronickel systems,” in: High-Temperature Borides and Silicides: Collected Papers [in Russian], Naukova Dumka, Kyiv (1978), pp. 123–126.
11. V. P. Konoval, “Studying the contact interaction of composites based on titanium–chromium diboride with NiAl alloy,” Adgez. Raspl. Paika Mater., No. 45, 55–60 (2012).
12. V. A. Lavrenko, V. P. Konoval, A. D. Panasyuk, and A. P. Umansky, “High-temperature oxidation of AlN–TiCrB2 composites. I. Kinetics and mechanism of air oxidation up to 1600°C,” Powder Metall. Met. Ceram., 54, No. 7–8, 482–489 (2015).10.1007/s11106-015-9739-y ↗
13. A. D. Panasyuk, V. P. Konoval, V. A. Lavrenko, et al., “High-temperature oxidation of AlN–TiCrB2 composites in air. II. Structure and phase composition of oxide layers formed on AlN–TiCrB2 composites in air up to 1600°C,” Powder Metall. Met. Ceram., 54, No. 9–10, 599–606 (2016).10.1007/s11106-016-9753-8 ↗