journal article·2023-05

Enhanced Tribological Properties of CrN Coatings on Densified Surfaces of Fe-Based Porous Materials Obtained Through Powder Metallurgy and Ultrasonic Shot Peening Treatment

Wuming Guo, Yebiao Zhu, Haixin Wang, Jiafeng Wang, Zhidong Chen, Fei Song

Powder Metallurgy and Metal Ceramics· Volume 62· Issue 1-2
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Diamond and Carbon-based Materials Research · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. X. Liu, Z.Y. Xiao, H.j. Guan, W. Zhang, and F.L. Li, “Friction and wear behaviors of surface densified powder metallurgy Fe–2Cu–0.6C material,” Powder Metall., 59, No. 5, 329–334 (2016).10.1080/00325899.2016.1242880 ↗
2. S. Manchoul, R. Ben Sghaier, R. Seddik, and R. Fathallah, “Comparison between conventional shot peening and ultrasonic shot peening,” Mechan. Industry, 19, No. 6, 1–8 (2019).10.1051/meca/2018045 ↗
3. J. Badreddine, E. Rouhaud, M. Micoulaut, R. Sébastien, V. Desfontaine, and P. Renaud, “3D model of shot dynamics for ultrasonic shot peening,” Mater. Sci. Forum, 768–769, 503–509 (2013).10.4028/www.scientific.net/MSF.768-769.503 ↗
4. S. Kumar, G. Sudhakar Rao, K. Chattopadhyay, G.S. Mahobia, N.C. Santhi Srinivas, and V. Singh, “Effect of surface nanostructure on tensile behavior of superalloy IN718,” Mater. Design (1980–2015), 62, 76–82 (2014).10.1016/j.matdes.2014.04.084 ↗
5. J. Marteau, M. Bigerelle, P.E. Mazeran, and S. Bouvier, “Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening,” Tribology Int., 82, 319–329 (2015).10.1016/j.triboint.2014.07.013 ↗
6. K. Rzepiejewska-Malyska, M. Parlinska-Wojtan, K. Wasmer, S. Hejduk, and J. Michler, “In-situ SEM indentation studies of the deformation mechanisms in TiN, CrN and TiN/CrN,” Micron, 40, No. 1, 22–27 (2009).10.1016/j.micron.2008.02.013 ↗
7. H. Zhang, S.W. Duo, X.M. Xu, H. Ke, T.Z. Liu, X.Y. Fei, and Z.H. Zhou, “Influence of substrate temperature and bias voltage on structure and mechanical properties of CrN coatings,” Key Eng. Mater., 591, 99–103 (2013).10.4028/www.scientific.net/KEM.591.99 ↗
8. X. Cai, Y. Gao, F. Cai, L. Zhang, and S.H. Zhang, “Effects of multilayer structure on microstructure, wear and erosion performance of the Cr/CrN films on Ti alloy substrate,” Appl. Surf. Sci., 483, 661–669 (2019).10.1016/j.apsusc.2019.04.008 ↗
9. J.W. Du, L. Chen, J. Chen, and Y. Du, “Mechanical properties, thermal stability and oxidation resistance of TiN/CrN multilayer coatings,” Vacuum, 179,109468 (2020).10.1016/j.vacuum.2020.109468 ↗
10. Z.B. Qi, B. Liu, Z.T. Wu, E.P. Zhu, Z.C. Wang, and C.H. Wu, “A comparative study of the oxidation behavior of Cr2N and CrN coatings,” Thin Sol. Films, 544, 515–520 (2013).10.1016/j.tsf.2013.01.031 ↗
11. Y. Zhu, M. Dong, J. Li, and L.P. Wang, “Wear failure mechanism of TiSiN coating at elevated temperatures,” Appl. Surf. Sci., 487, 349–355 (2019).10.1016/j.apsusc.2019.05.120 ↗
12. M. Dong, Y. Zhu, C. Wang, L. Shan, and J. Li, “Structure and tribocorrosion properties of duplex treatment coatings of TiSiCN/nitride on Ti6Al4V alloy,” Ceram. Int., 45, No. 9, 12461–12468 (2019).10.1016/j.ceramint.2019.03.180 ↗
13. S.N. Chen, Y.M. Zhao, Y.F. Zhang, L. Chen, B. Liao, X. Zhang, and X.P. Ouyang, “Influence of carbon content on the structure and tribocorrosion properties of TiAlCN/TiAlN/TiAl multilayer composite coatings,” Surf. Coat. Technol., 411,126886-1–12 (2021).10.1016/j.surfcoat.2021.126886 ↗
14. L. Shan, Y. Wang, J. Li, X. Jiang, and J.M. Chen, “Architecture of multilayer Cr/CrN coatings for wear protection in seawater: Cr/CrN ratio and total thickness,” Tribology Trans., 58, No. 5, 914–923 (2015).10.1080/10402004.2015.1027433 ↗
15. J.L. Tijerina-Gonzaleza, M.A.L. Hernandez-Rodriguez, D.E. Lozano, G.M. Martinez-Cazares, Y. Bedolla-Gil, “Tribological characterization of AlCrN, AlTiN, AlTiON, and AlCrON coatings on CoCrMo alloy,” Tribology Trans., 64, No. 1, 119–125 (2021).10.1080/10402004.2020.1812780 ↗
16. D. Yang, H. Chen, Y. Ye, C.T. Wang, H.C. Zhao, and D.R. Gong, “Doping silicon to enhance the anticorrosion and anti-wear abilities of chromium nitride coating in seawater,” Surf. Topography: Metrol. Propert., 6, No. 4, 044001-1–11 (2018).10.1088/2051-672X/aaee9e ↗
17. J.-Z. Kong, T.-J. Hou, Q.-Z. Wang, L. Yin, F. Zhou, Z. Zhou, and L. Li, “Influence of titanium or aluminum doping on the electrochemical properties of CrN coatings in artificial seawater,” Surf. Coat. Technol., 307, 118–124 (2016).10.1016/j.surfcoat.2016.08.036 ↗
18. J.L. Mo and M.H. Zhu, “Tribological oxidation behaviour of PVD hard coatings,” Tribology Int., 42, No. 11–12, 1758–1764 (2009).10.1016/j.triboint.2009.04.026 ↗
19. Y. Zhu, M. Dong, X. Zhao, J. Li, K. Chang, and L. Wang, “Self-healing of TiSiN/Ag coatings induced by Ag,” J. Am. Ceram. Soc., 102, No. 12, 7521–7532 (2019).10.1111/jace.16547 ↗
20. H. Wang, Y. Ye, G. Zhang, and W. Liu, “Silicon content design of CrSiN films for good anti-corrosion and anti-wear performances in NaOH solution,” Surf. Topography: Metrol. Propert., 6, No. 2, P. 100389 (2018).10.1088/2051-672X/aab522 ↗
21. P. Wen, F. Zhang, Y. Chen, S. Guo, S. Zhou, Y. Ye, and H. Chen, “Comparative study on tribological behavior of CrAlN coating in atmosphere, deionized water and 5 wt.% NaCl solution,” Surf. Topography: Metrol. Propert., 7, No. 4, 045102-1–10 (2019).10.1088/2051-672X/ab4a90 ↗
22. X. Zhou, X.Y. Li, and K. Lu, “Enhanced thermal stability of nanograined metals below a critical grain size,” Science, 360, 526–530 (2018).10.1126/science.aar6941 ↗
23. Z.B. Qi, P. Sun, F.P. Zhu, Z.C. Wang, D.L. Peng, and C.H. Wu, “The inverse Hall–Petch effect in nanocrystalline ZrN coatings,” Surf. Coat. Technol., 205, No. 12, 3692–3697 (2011).10.1016/j.surfcoat.2011.01.021 ↗
24. X.-f. Qin, D.-l. Sun, T. Wang, X. Zhao, L. Xie, and Q. Wu, “Hall–Petch and inverse Hall–Petch effects accompany the long-term use of backup roll material,” J. Alloys Compd., 640, 497–500 (2015).10.1016/j.jallcom.2015.04.030 ↗
25. A.V. Naumkin, A. Kraut-Vass, S.W. Gaarenstroom, and C.J. Powell, NIST X-ray Photoelectron Spectroscopy Database (2012).
26. D. Mandrino and B. Podgornik, “XPS investigations of tribofilms formed on CrN coatings,” Appl. Surf. Sci., 396, 554–559 (2017).10.1016/j.apsusc.2016.10.194 ↗
27. K. Huang, X. Cao, L. Kong, Z. Lu, G. Zhang, Q. Ding, and H. Hu, “Effect of Ag content on friction and wear properties of Ag and V co-doped CrN coatings at 25–700°C,” Ceram. Int., 47, No. 24, 35021–35028 (2021).10.1016/j.ceramint.2021.09.043 ↗
28. A. Conde, A.B. Cristóbal, G. Fuentes, T. Tate, J. de Damborenea, “Surface analysis of electrochemically stripped CrN coatings,” Surf. Coat. Technol., 201, No. 6, 3588–3595 (2006).10.1016/j.surfcoat.2006.08.110 ↗