journal article·2022-01Open access

Information on the Annual Report of the Ukrainian Commission of Phase Diagrams and Thermodynamics (2021)

M. A. Turchanin, T. Ya. Velikanova, K. Ye. Korniyenko

Powder Metallurgy and Metal Ceramics· Volume 60· Issue 9-10

Abstract

The main tasks of the international scientific organization Alloy Phase Diagram International Commission (APDIC), which unites 18 member organizations involving 26 countries, are the exchange of information and coordination of the activities of the international scientific community, mainly in the field of phase diagrams and thermodynamics. The Ukrainian Phase Diagrams and Thermodynamics Commission has been a member of APDIC since 1994. The annual report of the Ukrainian Commission on the results of the activities of Ukrainian scientists in this field in 2020 was presented at the APDIC meeting on June 18, 2021, which was held online due to the coronavirus pandemic. This information is presented in a table, collecting data on the studied systems and obtained result and containing a list of references to published papers. Scientists from the Frantsevich Institute for Problems of Materials Science (National Academy of Sciences of Ukraine, Kyiv), Taras Shevchenko National University of Kyiv (Ministry of Education and Science of Ukraine, Kyiv), and Donbas State Engineering Academy (Ministry of Education and Science of Ukraine, Kramatorsk) provided relevant information to the Ukrainian Commission.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Intermetallics and Advanced Alloy Properties · X-ray Diffraction in Crystallography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. K.Ye. Korniyenko, L.S. Kriklya, V.M. Petyukh, I.B. Tikhonova, V.B. Sobolev, and A.V. Samelyuk, “Phase equilibria in the Al–Cr–Co system in the range of compositions 0–70 at.% Al,” J. Phase Equilibria Diffusion, 42, No. 1, 118–141 (2021), https://doi.org/10.1007/s11669-021-00864-2.10.1007/s11669-021-00864-2 ↗
2. M.V. Remez, Yu.M. Podrezov, A.A. Bondar, V. Witusiewicz, U. Hecht, N.I. Tsyganenko , O.O. Bilous, and V.M. Petyukh, “Structure and properties of TiAl-based alloys doped with 2 at.% Mo,” Powder Metall. Met. Ceram., 59, No. 7–8, 454–466 (2020), https://doi.org/10.1007/s11106-020-00179-w.10.1007/s11106-020-00179-w ↗
3. M. Bulanova, I. Fartushna, A. Samelyuk, K. Meleshevich, I. Tikhonova, and J.C. Tedenac, “Solidus surface of Zr–Co–Sn system,” J. Phase Equilibria Diffusion, 41, No. 4, 329–346 (2020), https://doi.org/10.1007/s11669-020-00791-8.10.1007/s11669-020-00791-8 ↗
4. J.C. Tedenac, P.J. Yot, M. Bulanova, J. Fartushna, and C. Colinet, “Evidence of an ordered ternary phase in the section Ni–Ti5Sn3 of the ternary Ti–Ni–Sn: crystal structure and phase stability,” Solid State Sci., 109, p. 106349 (2020), https://doi.org/10.1016/j.solidstatesciences.2020.106349.10.1016/j.solidstatesciences.2020.106349 ↗
5. S.V. Utkin, A.A. Bondar, V.Z. Kublii, L.M. Kapitanchuk, and I.B. Tikhonova, “Solidus surface of the Mo–Fe–B system,” Powder Metall. Met. Ceram., 59, No. 1–2, 89–105 (2020), https://doi.org/10.1007/s11106-020-00141-w.10.1007/s11106-020-00141-w ↗
6. O.M. Myslyvchenko, A.A. Bondar, V.F. Horban’, Yu.F. Luhovskyi, V.B. Sobolev, and I.B. Tikhonova, “Structure and physicomechanical properties of cast titanium alloys of the Ti−Nb−Mo system,” Mater. Sci., 56, No. 2, 224–231 (2020), https://doi.org/10.1007/s11003-020-00420-2.10.1007/s11003-020-00420-2 ↗
7. O. Myslyvchenko, A. Bondar, V. Petyukh, I. Tikhonova, and N. Tsyganenko, “Structure of orthorhombic martensite in the Ti92.5Nb5Mo2.5 alloy, its deformation and thermal stability,” Mater. Lett., 277, p. 178267 (2020), https://doi.org/10.1016/j.matlet.2020.128267.10.1016/j.matlet.2020.128267 ↗
8. O.M. Myslyvchenko, M.O. Krapivka, O.S. Tereshchenko, and M.I. Filep, “Influence of сhromium on the phase composition and specific features of hardening of the MnFeCoNiCu high-entropy alloy,” Mater. Sci., 56, No. 3, 375–380 (2020), https://doi.org/10.1007/s11003-020-00440-y.10.1007/s11003-020-00440-y ↗
9. O.M. Myslyvchenko, O.P. Gaponova, V.B. Tarelnyk, and M.O. Krapivka, “The structure formation and hardness of high-entropy alloy coatings obtained by electrospark deposition,” Powder Metall Met. Ceram., 59, No. 3–4, 201–208 (2020); https://doi.org/10.1007/s11106-020-00152-7.10.1007/s11106-020-00152-7 ↗
10. V.S. Sudavtsova, L.O. Romanova, V.G. Kudin, M.I. Ivanov, and A.S. Kozorezov, “Thermodynamic properties and phase equilibria in Ba–Sn alloys,” Powder Metall Met. Ceram., 59, No. 7–8, 445–453 (2020), https://doi.org/10.1007/s11106-020-00178-x.10.1007/s11106-020-00178-x ↗
11. M.I. Ivanov, L.O. Romanova, M.O. Shevchenko, V.S. Sudavtsova, and V.G. Kudin, “Mixing enthalpies of Sr–Sb melts,” Powder Metall Met. Ceram., 58, No. 11–12, 725–729 (2020); https://doi.org/10.1007/s11106-020-00129-6.10.1007/s11106-020-00129-6 ↗
12. L.A. Romanova, V.G. Kudin, V.S. Sudavtsova, P.P. Levchenko, and M.I. Ivanov, “Thermodynamic properties of melts of the ternary system Ag–Al–Yb,” Russian J. Phys. Chem. A., 94, No. 8, 1532–1534 (2020); https://doi.org/10.1134/S0036024420080245.10.1134/S0036024420080245 ↗
13. O.V. Dudnik, I.O. Marek, O.K. Ruban, V.P. Redko, M.I. Danilenko, S.A. Korniy, and L.M. Melakh, “Effect of heat treatment on the structure and phase composition of the nanosized powder based on a ZrO2 solid solution,” Powder Metall Met. Ceram., 59, No. 1–2, 1–8 (2020); https://doi.org/10.1007/s11106-020-00132-x.10.1007/s11106-020-00132-x ↗
14. E.V. Dudnik, M.S. Glabay, A.V. Kotko, S.A. Korniy, I.O. Marek, V.P. Red’ko, and A.K. Ruban, “Effect of heat treatment on the physicochemical properties of ultrafine ZrO2–Y2O3–CeO2–Al2O3–CoO powders,” Powder Metall Met. Ceram., 59, No. 7–8, 359–367 (2020); https://doi.org/10.1007/s11106-020-00169-y.10.1007/s11106-020-00169-y ↗
15. O.A. Korniienko, A.I. Bykov, E.R. Andrievskaya, and A.A. Makudera, “Phase equilibria in the ZrO2–CeO2–Yb2O3 system at 1100°C,” Powder Metall Met. Ceram., 59, No. 5–6, 342–349 (2020); https://doi.org/10.1007/s11106-020-00167-0.10.1007/s11106-020-00167-0 ↗
16. E.R. Andrievskaya, O.A. Kornienko, A.I. Bykov, and A.V. Sameliuk, “Phase equilibria in the ZrO2–La2O3–Gd2O3 system at 1600°C,” Powder Metall Met. Ceram., 58, No. 11–12, 714–724 (2020); https://doi.org/10.1007/s11106-020-00128-7.10.1007/s11106-020-00128-7 ↗
17. O.A. Korniienko, A.I. Bykov, and E.R. Andrievskaya, “Phase equilibria in the ZrO2–La2O3–Sm2O3 system at 1100°C,” Powd. Metall. Met. Ceram., 59, No. 3–4, 224–231; https://doi.org/10.1007/s11106-020-00154-5.10.1007/s11106-020-00154-5 ↗
18. V.E. Sokolskii, D.V. Pruttskov, O.M. Yakovenko, V.P. Kazimirov, O.S. Roik, N.V. Golovataya, and G.V. Sokolsky, “X-Ray diffraction study of structure of CaO–Al2O3–SiO2 ternary compounds in molten and crystalline states,” J. Mining Metallurgy, Section B: Metallurgy., 56, No. 2, 269–277 (2020); https://doi.org/10.2298/JMMB190806016S.10.2298/JMMB190806016S ↗
19. O.S. Roik, O.M. Yakovenko, V.P. Kazimirov, V.E. Sokolskii, N.V. Golovataya, and G.M. Zelinskaya, “Formation of the short-range order in Al–Ge–Fe melts: influence of composition,” Physics Chemistry Liquids., 58, No. 1, 94–104 (2020); https://doi.org/10.1080/00319104.2018.1550776.10.1080/00319104.2018.1550776 ↗
20. P. Agraval, L. Dreval, M. Turchanin, and T. Velikanova, “Thermodynamic assessment of the Co–Zr system,” J. Phase Equilibria Diffusion., 41, No. 4, 491–499 (2020); https://doi.org/10.1007/s11669-020-00805-5.10.1007/s11669-020-00805-5 ↗
21. M. Turchanin, P. Agraval, L. Dreval, and A. Vodopyanova, “Calorimetric investigation of the mixing enthalpy of liquid Hf–Ni–Ti alloys and thermodynamic properties and chemical ordering in quaternary liquid Cu–Hf–Ni–Ti alloys,” J. Phase Equilibria Diffusion., 41, No. 4, 469–490 (2020); https://doi.org/10.1007/s11669-020-00806-4.10.1007/s11669-020-00806-4 ↗
22. Y. Zeng, L.O. Dreval, O.I. Dovbenko, Y. Du, Sh. Liu, B. Hu, P.G. Agraval, and M.A. Turchanin, “Thermodynamic assessment of the Mg–Ni–Si system,” Powder Metall Met. Ceram., 59, No. 3–4, 209–223 (2020); https://doi.org/10.1007/s11106-020-00153-6.10.1007/s11106-020-00153-6 ↗
23. Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology — New Series. Group IV: Physical Chemistry. Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams. Stuttgart: Materials Science International, 2019. Vol. 19. Selected Systems for Nuclear Applications; ed. by G. Effenberg, S. Iljenko; associated editors O.I. Dovbenko and L.O. Dreval, 534 p.; ISBN 978-3-932120-12-1.
24. B. Grieb, H.L. Lukas, O. Dovbenko, and L. Dreval, “Aluminium–Iron–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 1–23.
25. Z. Alekseeva, K. Korniyenko, O. Dovbenko, and L. Dreval, “Aluminium–Molybdenum–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 24–44.
26. K. Korniyenko, “Aluminium–Oxygen–Plutonium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 45–50.
27. P. Rogl, H. Noel, O. Dovbenko, and L. Dreval, “Aluminium–Silicon–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 53–69.
28. K. Korniyenko, “Carbon–Molybdenum–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 84–105.
29. P. Perrot, O. Dovbenko, and L. Dreval, “Carbon–Nitrogen–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 106–114.
30. P. Perrot, O. Dovbenko, and L. Dreval, “Carbon–Oxygen–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 115–125.
31. K. Korniyenko, N. Lebrun, O. Dovbenko, and L. Dreval, “Carbon–Plutonium–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 152–172.
32. K. Korniyenko, “Carbon–Plutonium–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 173–179.
33. K. Korniyenko, “Carbon–Rhodium–Thorium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 180–184.
34. K. Korniyenko, “Carbon–Rhodium–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 185–193.
35. K. Korniyenko, “Carbon–Ruthenium–Thorium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 194–199.
36. K. Korniyenko, “Carbon–Ruthenium–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 200–210.
37. K. Korniyenko, “Carbon–Thorium–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 214–225.
38. N. Bochvar, Yu. Liberov, O. Fabrichnaya, O. Dovbenko, and L. Dreval, “Cerium–Magnesium–Oxygen,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 235–240.
39. P. Perrot, O. Dovbenko, and L. Dreval, “Cesium–Iron–Oxygen,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 241–247.
40. O. Fabrichnaya, O. Dovbenko, and L. Dreval, “Cesium–Molybdenum–Oxygen,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 248–263.
41. P. Perrot, O. Dovbenko, and L. Dreval, “Cesium–Oxygen–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 264–272.
42. J.C. Tedenac, P. Perrot, O. Dovbenko, and L. Dreval, “Cesium–Oxygen–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 273–277.
43. K. Korniyenko, H.L. Lukas, O. Dovbenko, and L. Dreval, “Iron–Sodium–Oxygen,” in Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 282–301.
44. K. Korniyenko, O. Dovbenko, and L. Dreval, “Iron–Oxygen–Lead,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 302–316.
45. O. Fabrichnaya, O. Dovbenko, and L. Dreval, “Iron–Uranium–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 326–332.
46. V. Kuznetsov, O. Dovbenko, and L. Dreval, “Molybdenum–Oxygen–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 338–348.
47. P. Rogl, H. Noel, O. Dovbenko, and L. Dreval, “Molybdenum–Silicon–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 352–360.
48. P. Perrot, O. Dovbenko, and L. Dreval, „Nitrogen–Plutonium–Zirconium,“ in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 372–375.
49. P. Perrot, O. Dovbenko, and L. Dreval, “Oxygen–Thorium–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 456–460.
50. P. Perrot, O. Dovbenko, and L. Dreval, “Oxygen–Uranium–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 461–476.
51. V. Ivanchenko, T. Pryadko, O. Dovbenko, and L. Dreval, “Plutonium–Thorium–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 482–488.
52. V. Ivanchenko, T. Pryadko, O. Dovbenko, and L. Dreval, “Plutonium–Uranium–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 489–506.
53. A. Kozlov, O. Dovbenko, and L. Dreval, “Ruthenium–Silicon–Uranium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 507–529.
54. O. Fabrichnaya, O. Dovbenko, and L. Dreval, “Thorium–Uranium–Zirconium,” in: Vol. 19, Selected Systems for Nuclear Applications, MSI, Stuttgart (2019), p. 530–534.
55. O. Tymoshenko, A. Bondar, O. Dovbenko, and L. Dreval, “Al–C–Cr ternary phase diagram evaluation, [Web Resource], MSI Eureka, MSI, Mater. Sci. Int., Stuttgart (2020), Document ID: 10.24008.2.6.10.7121/msi-eureka-10.24008.2.6 ↗