New Magnesium Composite with Mg17Al12 Intermetallic Particles
Source abstract
Abstract
Although magnesium is one of the materials with the lowest density, its application is limited amongst other commercial materials due to insufficient strength. Generally, the strength of magnesium can be increased by introducing the Mg17Al12 phase into the structure with the addition of aluminum. In this study, as a different approach, Mg17Al12 particles were added to pure magnesium to form a composite structure. For this purpose, Mg composites with different Mg17Al12 contents were fabricated by powder metallurgy methods. Pure Mg and Mg17Al12 particles were mixed in a vacuum ball milling equipment for 1 h using zirconia balls to obtain the Mg metal matrix composite with homogeneously distributed intermetallic reinforcements. While for pure Mg powders, the sintering temperature was selected as 600°C, for Mg + Mg17Al12 mixtures, it was 420°C due to the eutectic transformation between Mg and Al. The sintering time and pressure of the Mg-based mixtures were held constant for 30 min and 50 MPa, respectively. All sintering processes were carried out under a 10–2 Pa vacuum atmosphere. Microstructural characterization was performed using optical microscopy and scanning electron microscopy. The hardness and wear properties of the composites produced have also been studied. The hardness and wear resistance of composites increased significantly as the Mg17Al12 particle content increased. Although the particle-enhanced composite density increased from 1.72 to 1.92 g/cm3, a 2.4-fold increase in hardness and a two-fold increase in wear resistance was observed. This magnesium composite produced with a new design could be used in many different areas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. B. Carcel, J. Sampedro, A. Ruescas, and X. Toneu, “Corrosion and wear resistance improvement of magnesium alloys by laser cladding with Al–Si,” Phys. Procedia, 12, 353–363 (2011), DOI: https://doi.org/10.1016/j.phpro.2011.03.045.10.1016/j.phpro.2011.03.045 ↗
2. G. Li, H.M. Wang, Y. Cai, and X.T. Yuan, “Behavior of β(Mg17Al12) phases in Mg–Al alloy subject to cycling cryogenic treatment,” Key Eng. Mater., 575–576, 390–393 (2013), DOI: https://doi.org/10.4028/www.scientific.net/KEM.575-576.390.10.4028/www.scientific.net/KEM.575-576.390 ↗
3. K.N. Kulkarni and A.A. Luo, “Interdiffusion and phase growth kinetics in magnesium-aluminum binary system,” J. Phase Equilib. Diff., 34, No. 2, 104–115 (2013), DOI: https://doi.org/10.1007/s11669-013-0189-2.10.1007/s11669-013-0189-2 ↗
4. H. Okamoto, “Supplemental literature review of binary phase diagrams: Al–Mg, Bi–Sr, Ce–Cu, Co–Nd, Cu–Nd, Dy–Pb, Fe–Nb, Nd–Pb, Pb–Pr, Pb–Tb, Pd–Sb, and Si–W,” J. Phase Equilib. Diff. 36, No. 2, 183–195 (2014), DOI: https://doi.org/10.1007/s11669-014-0359-x.10.1007/s11669-014-0359-x ↗
5. J.L. Murray, “The Al–Mg (Aluminum–Magnesium) system,” Bull. Alloy Phase Diagrams, 3, No. 1, 60–74 (1982).10.1007/BF02873413 ↗
6. J. Ragani, P. Donnadieu, C. Tassin, and J.J. Blandin, “High-temperature deformation of the γ-Mg17Al12 complex metallic alloy,” Scr. Mater., 65, No. 3, 253–256 (2011), DOI: https://doi.org/10.1016/j.scriptamat.2011.04.022.10.1016/j.scriptamat.2011.04.022 ↗
7. M. Fatmi, A. Djemli, A. Ouali, T. Chihi, M.A. Ghebouli, and H. Belhouchet, “Heat treatment and kinetics of precipitation of β-Mg17Al12 phase in AZ91 alloy,” Results Phys., 10, 693–698 (2018), DOI: https://doi.org/10.1016/j.rinp.2018.07.009.10.1016/j.rinp.2018.07.009 ↗
8. M.X. Zhang, H. Huang, K. Spencer, and Y.N. Shi, “Nanomechanics of Mg–Al intermetallic compounds,” Surf. Coat. Technol., 204, No. 14, 2118–2122 (2010), DOI: https://doi.org/10.1016/j.surfcoat.2009.11.031.10.1016/j.surfcoat.2009.11.031 ↗
9. H.W. Chang, M.X. Zhang, A. Atrens, and H. Huang, “Nanomechanical properties of Mg–Al intermetallic compounds produced by packed powder diffusion coating (PPDC) on the surface of AZ91E,” J. Alloys Compd., 587, 527–532 (2014), DOI: https://doi.org/10.1016/j.jallcom.2013.10.235.10.1016/j.jallcom.2013.10.235 ↗
10. R. Yamanoglu, “Pressureless spark plasma sintering: A perspective from conventional sintering to accelerated sintering without pressure,” Powder Metall. Met. Ceram., 57, No. 9–10, 513–525 (2019), DOI: https://doi.org/10.1007/s11106-019-00010-1.10.1007/s11106-019-00010-1 ↗
11. J. Satish and K.G. Satish, “Preparation of magnesium metal matrix composites by powder metallurgy process,” IOP Conf. Ser.: Materials Science and Engineering, 310, 012130 (2018), DOI: https://doi.org/10.1088/1757-899x/310/1/012130.10.1088/1757-899x/310/1/012130 ↗
12. R. Purohit, Y. Dewang, R.S. Rana, D. Koli, and S. Dwivedi, “Fabrication of magnesium matrix composites using powder metallurgy process and testing of properties,” Mater. Today: Proc., 5, 6009–6017 (2018).
13. R. Yamanoglu, “Production and characterisation of Al–xNi in situ composites using hot pressing,” J. Mining Metall., Section B: Metallurgy, 50. No. 1, 45–52 (2014), DOI: https://doi.org/10.2298/jmmb130717001y.10.2298/jmmb130717001y ↗
14. Wu G., Zhang Q., Yang X., Huang Z., Sha W. Effects of particle/matrix interface and strengthening mechanisms on the mechanical properties of metal matrix composites. Compos. Interfaces. 2013. Vol. 21, No. 5. P. 415–429. DOI: https://doi.org/10.1080/15685543.2014.872914.10.1080/15685543.2014.872914 ↗
15. D.J. Lloyd, “Particle reinforced aluminium and magnesium matrix composites,” Int. Mater. Rev., 39, No. 1, 1–23 (1994).10.1179/imr.1994.39.1.1 ↗
16. Guoqiang Xie, Osamu Ohashi, Takahiro Sato, Norio Yamaguchi, Minghui Song, Kazutaka Mitsuishi, and K. Furuya, “Effect of Mg on the sintering of Al–Mg alloy powders by pulse electric-current sintering process,” Mater. Trans., 45, No. 3, 904–909 (2004).10.2320/matertrans.45.904 ↗
17. Z. Fu, X. Chen, B. Liu, J. Liu, X. Han, Y. Deng, W. Hu, and C. Zhong, “One-step fabrication and localised electrochemical characterisation of continuous Al-alloyed intermetallic surface layer on magnesium alloy,” Coatings, 8, No. 4,148 (2018), DOI: https://doi.org/10.3390/coatings8040148.10.3390/coatings8040148 ↗
18. L. Liu, F. Yuan, M. Zhao, C. Gao, P. Feng, Y. Yang, S. Yang, C. Shuai, “Rare earth element yttrium modified Mg–Al–Zn alloy: microstructure, degradation properties and hardness,” Mater. (Basel), 10, No. 5, 477 (2017), DOI: https://doi.org/10.3390/ma10050477.10.3390/ma10050477 ↗
19. A. Ganda Putra, A. Manaf, and A. Anawati, “Enhancing the hardness of Mg–9Al–1Zn cast alloy by solution treatment,” IOP Conf. Ser.: Materials Science and Engineering (2019), DOI: https://doi.org/10.1088/1757-899x/515/1/012088.10.1088/1757-899x/515/1/012088 ↗
20. W. Guo, D. Wang, Y. Fu, L. Zhang, and Q. Wang, “Dry sliding wear properties of AZ31–Mg2Si magnesium matrix composites,” J. Mater. Eng. Perform., 25, No. 10, 4109–4114 (2016), DOI: https://doi.org/10.1007/s11665-016-2263-5.10.1007/s11665-016-2263-5 ↗
21. L. Feray Guleryuz, S. Ozan, D. Uzunsoy, and R. Ipek, “Investigation of dry sliding wear behaviour of B4C particulate reinforced Mg matrix composites,” Acta Phys. Pol., A., 123, No. 2, 488–489 (2013), DOI: https://doi.org/10.12693/APhysPolA.123.488.10.12693/APhysPolA.123.488 ↗
22. E. Karakulak, M. Zeren, and R. Yamanoglu, “Effect of heat treatment conditions on microstructure and wear behaviour of Al4Cu2Ni2Mg alloy,” Trans. Nonferrous. Met. Soc. China, 23, 1898–1904 (2013), DOI: https://doi.org/10.1016/S1003-6326(13)62675-8.10.1016/S1003-6326(13)62675-8 ↗
23. R.V.P. Kaviti, D. Jeyasimman, G. Parande, M. Gupta, and R. Narayanasamy, “Investigation on dry sliding wear behavior of Mg/BN nanocomposites,” J. Magne Alloy, 6, No. 3, 263–276 (2018), DOI: https://doi.org/10.1016/j.jma.2018.05.005.10.1016/j.jma.2018.05.005 ↗