journal article·2019-07

Production of Metallic Fiber Materials and Determination of Pore Sizes

I. K. Valeeva, O.V. Kirichenko

Powder Metallurgy and Metal Ceramics· Volume 58· Issue 3-4
Publisher page

Abstract

The processing line and technique were developed for producing materials from 316L steel fibers 12 and 30 μm in diameter as sheets with a porosity of 50–80% and a thickness of 0.5–10.5 mm. Model concepts of pore shape in sintered metallic fiber materials were used to derive three dependences of the mean pore size of these materials on their porosity and the starting fiber diameter. Comparisons of the mean pore sizes determined experimentally with standard methods and calculated by Valeeva’s equations indicate that the calculated results are highly reliable. This allows predicting the properties of metallic fiber materials with adequate accuracy without additional costs for the production of prototypes, process adjustments, or equipment for experimental determination of the mean pore size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. O.V. Kirichenko, “Metallic fiber materials,” in: Inorganic Materials Science [in Russian], in 2 Vols., Kyiv (2008), Vol. 2, Book 1, pp. 212–230.
2. O.V. Kirichenko and V.N. Klimenko, “Properties of microporous permeable materials made from superfine metallic fibers,” Powder Metall. Met. Ceram., 50, Nos. 11–12, 768–773 (2012).10.1007/s11106-012-9387-4 ↗
3. O.V. Kirichenko, V.N. Klimenko, I.V. Shapoval, and I.K. Valeeva, “Filtering properties of porous materials made of thin stainless steel fibers,” Powder Metall. Met. Ceram., 54, Nos. 3–4, 151–155 (2015).10.1007/s11106-015-9692-9 ↗
4. O.V. Kirichenko, V.N. Klimenko, I.A. Gusarova, I.V. Shapoval, and Yu.A. Shevlyakov, “Production of porous and composite materials with highly effective shielding from metallic fibers,” Kosm. Nauka Tekhnol., 20, No. 5, 66–77 (2014).10.15407/knit2014.05.066 ↗
5. A.G. Kostornov, Materials Science of Fine and Porous Materials and Alloys [in Russian], in 2 Vols., Kyiv (2003), Vol. 2, p. 550.
6. GOST 26849–86, Powder Materials. Pore Size Determination Methods [in Russian], Moscow (1986).
7. GOST 25283–93, Permeable Sintered Metal Materials. Determination of Fluid Permeability [in Russian], Introduced January 1 (1997).
8. A.G. Kostornov, O.V. Kirichenko, S.P. Sakhno, and G.S. Tymchik, “Determination of the average pore size in thin sheets of permeable fiber materials by an optical method,” Powder Metall. Met. Ceram., 25, No. 1, 49–51 (1986).10.1007/BF00843019 ↗
9. A.G. Kostornov, O.V. Kirichenko, S.P. Sakhno, and G.S. Tymchik, “Porosity determination of thin fibrousmaterial sheets according to the optical transmission coefficient,” Powder Metall. Met. Ceram., 23, No. 10, 812–815 (1984).10.1007/BF00792156 ↗
10. V.S. Spiridonov, S.V. Belov, and O.V. Kirikova, “Calculation of the average pore size of porous materials,” Inzh. Fiz. Zh., 53, No. 4, 607–611 (1987).
11. A. Koponen, M. Kataja, J. Timonen, and D. Kandhai, “Simulations of single-fluid flow in porous media,” Intern. J. Modern Phys. C, 9, No. 8, 1505–1521 (1998).10.1142/S0129183198001369 ↗
12. I. Wijaya and A. Purqon, “Simulation of two phase fluid flow with various kinds of barriers using lattice Boltzmann method,” J. Phys.: Conf. Ser. (2017), URL: [doi: https://doi.org/10.1088/1742-6596/877/1/01205 ].10.1088/1742-6596/877/1/01205 ↗
13. A. Nabovati, E.W. Llewellin, and A.C.M. Sousa, “A general model for the permeability of fibrous porous media based on fluid flow simulations using the lattice Boltzmann method,” Composites A, 40, 860–869 (2009).10.1016/j.compositesa.2009.04.009 ↗