journal article·2018-03

Spark Plasma Sintering of TiN (Shell)–Si3N4 (Nanofiber) System

O. B. Zgalat-Lozynskyy, N. I. Tischenko, A. V. Ragulya

Powder Metallurgy and Metal Ceramics· Volume 56· Issue 11-12
Publisher page

Abstract

The formation of nanocomposite powder mixtures in titanium nitride–silicon nitride system is investigated. Titanium nitride coating (<20 nm thick) is obtained on the surface of silicon nitride nanofibers by chemical synthesis. A comparative analysis of consolidation by spark plasma sintering of nanocomposite materials prepared by chemical synthesis and mechanical mixing is conducted. After spark plasma sintering, core–shell configurated composites demonstrate a homogeneous fine-grained structure with particles 50–150 nm in size and high mechanical properties (HV ≈ 22 GPa, KIc ≈ 6.4 MPa · m1/2).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S. Kawano, J. Takahashi, and S. Shimada, “Fabrication of TiN/Si3N4 ceramics by spark plasma sintering of Si3N4 particles coated with nanosized TiN prepared by controlled hydrolysis of Ti(O-i-C3H7)4,” J. Am. Ceram. Soc., 86, No. 4, 701–705 (2003).10.1111/j.1151-2916.2003.tb03360.x ↗
2. S. Kawano, J. Takahashi, and S. Shimada, “Highly electroconductive TiN/Si3N4 composite ceramics fabricated by spark plasma sintering of Si3N4 particles with a nanosized TiN coating,” J. Mater. Chem., 12, No. 2, 361–365 (2002).10.1039/b107058b ↗
3. S. Kawano, K. Tsukurimichi, J. Takahashi, et al., “Preparation of nanosized TiN coated α-Si3N4 particles,” J. Mater. Chem., 11, No. 10, 2625–2628 (2001).10.1039/b102794h ↗
4. O. B. Zgalat-Lozinskii, “Nanocomposites based on refractory compounds, consolidated by rate-controlled and spark-plasma sintering (Review),” Powder Metall. Met. Ceram., 53, Nos. 1–2, 19–30 (2014).10.1007/s11106-014-9583-5 ↗
5. L. A. Diaz, W. Solis, P. Peretyagin, et al., “Spark plasma sintered Si3N4/TiN nanocomposites obtained by a colloidal processing route,” J. Nanomaterials, 2016, 1–9 (2016).10.1155/2016/3170142 ↗
6. O. B. Zgalat-Lozinskii, A. V. Ragulya, M. Herrmann, et al., “Structure and mechanical properties of spark plasma sintered TiN-based nanocomposites,” Arc. Metal. Mater., 57, No. 3, 853–858 (2012).10.2478/v10172-012-0093-5 ↗
7. N. I. Tishchenko, V. G. Kolisnechenko, N. V. Dubovitskaya, et al., “Surface modification of silicon nitride nanofibers with titanium nitride particles,” Powder Metall. Met. Ceram., 48, No. 11–12, 627–633 (2009).10.1007/s11106-010-9179-7 ↗
8. O. B. Zgalat-Lozynskyy, A. V. Ragulya, V. G. Kolesnichenko, et al., “Rate-controlled sintering of TiNSi3N4 synthesized in situ nanocomposite powders,” Ceramics, 101, 65–69 (2008).
9. K. Sarita, K. Susheel, C. Annamaria, et al., “Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites: a review,” Progr. Polymer Sci., 38, No. 8, 1232–1261 (2013).10.1016/j.progpolymsci.2013.02.003 ↗
10. J. Grabis, “Preparation of nanosized powders of refractory compounds and their composites by plasma techniques,” Int. J. Metal. Plant Technol., 252–269 (2007).
11. P. M. Silenko, A. N. Shlapak, A. I. Bykov, et al., “Silicon nitride nanofibers produced by pyrolysis of SiCl4 in H2 and N2 media,” Teor. Eksperim. Khimiya, No. 2, 81–84 (2007).
12. M. A. Hore and R. J. Composto, “Functional polymer nanocomposites enhanced by nanorods,” Macromolecules, No. 47, 875–887 (2014).10.1021/ma402179w ↗
13. J. Chen, L. Gao, and J. Huang, “Preparation of nanosized titania powder via the controlled hydrolysis of titanium alkoxide,” J. Mater. Sci., 31, No. 13, 3497–3500 (1996).10.1007/BF00360754 ↗
14. S. Yamabi and H. Imai, “Synthesis of rutile and anatase films with high surface areas in aqueous solution containing urea,” Thin Sol. Films, 434, Nos. 1–2, 86–93 (2003).10.1016/S0040-6090(03)00539-X ↗
15. Y. Gao, Y. Masuda, W.-S. Seo, et al., “TiO2 nanoparticles prepared using an aqueous peroxotitanate solution,” Ceram. Int., 30, No. 7, 1365–1368 (2004).10.1016/j.ceramint.2003.12.105 ↗
16. Y. Gao, Y. Masuda, Z. Peng, et al., “Room temperature deposition of a TiO2 thin film from aqueous peroxotitanate solution,” J. Mater. Chem., No. 13, 608–613 (2003).
17. O. Zgalat-Lozinskii, M. Andrzejczuk, V. Varchenko, et al., “Superplastic deformation of Si3N4 based nanocomposites reinforced by nanowhiskers,” Mater. Sci. Eng.: A, 606, 144–149 (2014).10.1016/j.msea.2014.03.109 ↗
18. N. Kondo, F. Wakai, T. Nishioka, et al., “Superplastic Si3N4 ceramics consisting of rod-shaped grains,” J. Mat. Sci. Let., 14, 1369–1371 (1995).10.1007/BF00270731 ↗