journal article·2016-11

Conductive Film Materials Based on Thermally Stable Fluorine-Containing Polyamide and Nickel Boride

A. V. Paustovskii, B. M. Rud’, V. E. Shelud’ko, E. Ya. Tel’nikov, N. I. Siman, P. S. Smertenko, V. V. Kremenitskii, Yu. I. Bogomolov

Powder Metallurgy and Metal Ceramics· Volume 55· Issue 7-8
Publisher page

Abstract

The development of resistor materials science and, namely, the feasibility of developing a composite film material based on the thermally stable polyamide and nickel boride as current-conducting filler, is considered. A process for producing films is developed: the films are obtained by coating the glass substrate with polymer solution with a pre-dispersed filler, followed by forming at 80°C with subsequent drying at 150°C until constant weight. The microstructure and topography of the film surface is studied by SEM and AFM. The formation of two-layer composite with the formation of conducting cluster (when the content of the conducting phase is >30 wt.%) from the substrate side is shown. Volt-amps diagrams are studied and analyzed by the differential method. The R(T) dependence is obtained and the temperature resistance coefficient is determined; the latter is positive and its value is 1.67 · 10–3 °C–1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Polymer Nanocomposite Synthesis and Irradiation · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Conductive Polymers: Industrial Study with Forecasts to 2010 & 2015. Study No. 2071. The Freedonia Group, Cleveland, USA (2006), p. 224.
2. M. Ates, T. Karazehir, and A. Sezai Sarac, “Conducting polymers and their applications,” Cur. Phys. Chem., 2, No. 3, 224–240 (2012).10.2174/1877946811202030224 ↗
3. A. G. Grozdov, E. A. Kosareva, O. A. Shtyleva, et al., “Conductive polymers,” Khim. Prom. Segod., No. 5, 44–49 (2007).
4. Yu. A. Mikhailin, “Conductive polymers and their application,” Polimer. Mater., 28, No. 9, 2–4 (2001).
5. Yu. A. Mikhailin, Structural Polymer Composite Materials [in Russian], Konstruk. Polimer. Kompoz. Mater., 2-nd Edition, Izdat. NOT, Moscow (2008), p. 822.
6. O. A. Moskalyuk, A. N. Alyoshin, E. S. Tsobkallo, et al., “Electrical conductivity of polypropylene fibers with dispersed carbon fillers,” Fiz. Tverd. Tela, 54, No. 10, 1993–1998 (2012).
7. A. G. Bannov and G. G. Kuvshinov, “Study of electrical conductivity and permittivity of epoxy composites with addition of carbon nanofibers,” Materialoved., No. 10, 47–51 (2011).
8. A. S. Stepashkina, A. N. Alyoshin, and P. P. Rymkevich, “Effect of temperature on volt-amps characteristics of composite materials based on polypropylene matrix and carbon fillers,” Fiz. Tverd. Tela, 57, No. 4, 814–818 (2015).
9. V. E. Gul’, V. F. Blinov, M. G. Golubeva, et al., “Electrical properties of carbon blacked polypyromeltitimide films at high temperatures,” Plast. Massy, No. 9, 45–46 (1976).
10. U. Abdurakhmanov, F. T. Boymuratov, and G. I. Mukhamedov, “Electrical conductivity of composite materials based on phenylon and nickel particles,” Radiotekh. Elektronika, 55, No. 2, 237–240 (2010).
11. T. I. Kolesnikova, L. I. Dukhovnyi, I. Yu. Shelekhov, et al., Resistive Heating Element Based on Maleimide Ether Polymer, in: Application of Conventional and New Films: Proceedings. Frantsevich Institute for Problems of Materials Science, NAS of Ukraine, Kiev (1994), pp. 108–111.
12. G. A. Syrenko, V. P. Sviderskii, V. D. Gerasimov, et al., Antifriction Thermally Stable Polymers [in Russian], Tekhnika, Kiev (1978), p. 247.
13. E. N. Ratnikov, Yu. L. Pogosov, and G. A. Mel’nikova, “Conductive cellulose ether polymers,” Plast. Massy, No. 1, 34–35 (1973).
14. V. G. Grebenkina, V. P. Yusov, and V. N. Sorokin, Bulk Resistors [in Russian], Nauk. Dumka, Kiev (1976), p. 210.
15. S. Kasap and P. Capper (Eds.), Springer Handbook of Electronic and Photonic Materials, Springer Science, Business Media Inc., New York (2006), p. 1406.
16. D. E. Dyshel’, E. Ya. Tel’nikov, and L. A. Babanina, Ni3B-Based Conductive Pastes on Metallic–Dielectric Substrates for Multiple Boards, in: New Materials for Thick Film Technology in Microelectronics: Proceedings. Frantsevich Institute for Problems of Materials Science, NAS of Ukraine, Kiev (1991), pp. 48–52.
17. E. Ya. Tel’nikov, Electrical–Physical Properties of Resistive Thick Films Based on Barium and Lanthanum Hexaborides [in Russian], Summary of the PhD Thesis, 01.04.07, Kiev (1990) p. 19.
18. Yu. K. Kul’ba, V. P. Linnik, V. I. Loginov, et al., X-ray and Thermal Study of Powder Conductive Layers Based on Borium Trinickel, in: New Materials in Microelectronics: Proceedings. Frantsevich Institute for Problems of Materials Science, NAS of Ukraine, Kiev (1988), pp. 131–136.
19. D. E. Dyshel’, B. M. Rud’, and E. Ya. Tel’nikov, Developing Pastes for Manufacturing Thick Film Heaters, in: Application of Conventional and Development of New Film Materials: Proceedings. Frantsevich Institute for Problems of Materials Science, NAS of Ukraine, Kiev (1994), pp. 104–107.
20. G. V. Samsonov, T. I. Serebryakova, and V. A. Neronov, Borides [in Russian], Atomizdat, Moscow (1975), p. 376.
21. A. S. Veksler, L. I. Dukhovnyi, and A. L. Petrov, “Nickel boride thick films,” Neotgan. Mater., 33, No. 9, 1070–1071 (1997).
22. B. F. Malichenko and O. N. Tsypina, “Polyamides based on fluorinealkylphenylenediamine and aromatic diacids,” Vysokomolek. Soed., B11, No. 5, 361–364 (1979).
23. P. Smertenko, L. Fenenko, L. Brehmer, and S. Schrader, “Differential approach to the study of integral characteristics in polymer films,” Advan. Coll. Inter. Sci., 116, Nos. 1–3, 255–261 (2005).10.1016/j.cis.2005.05.005 ↗
24. A. Cattaneo and M. Prudenziati, “Effects of refiring processes on electrical and structural properties of thick-film resistors,” Electrocomp. Sci. Technol., 6, Nos. 3–4, 165–171 (1980).10.1155/APEC.6.165 ↗
25. G. Samoggia, M. Scagliotti, and M. Prudenziati, “Reflectivity of thick film (cermet) resistors,” Thin Sol. Films, 103, Nos. 1–3, 323–331 (1983).10.1016/0040-6090(83)90450-9 ↗
26. D. E. Dyshel’, Electrical–Physical Properties of Resistive Thick Films Based on Doped Tin Dioxide [in Russian], Summary of the PhD Thesis, 01.04.07, Frantsevich Institute for Problems of Materials Science, NAS of UkrSSR, Kiev (1990) p. 22.